







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Enterprise Homeowners Choose Mr-Glass Construction
Mason Remodeling Enterprise provides independent Mr-Glass construction service in Enterprise, NV – repair, replacement, and installation of Mr-Glass frameless shower enclosures, semi-frameless sliding doors, custom mirrors, and glass shelving. We’re an independent Mr-Glass service provider, not a manufacturer-authorized dealer, so the guidance you get is about what your glass actually needs, not what a warranty program wants to sell. Our technicians have up to 22 years of experience with glass enclosures in Southern Nevada homes, and we put every price in writing before work starts.

That independence matters in Enterprise. A dealer is motivated to move you into a new unit. We look at the panel, the hardware, the seals, and the anchors and tell you which of those is actually failing. Sometimes it’s a $40 sweep. Sometimes the glass is etched past saving and replacement is the honest answer. Call (844) 797-6157 and we’ll schedule a free estimate.
Why Trust Mason Remodeling Enterprise for Your Mr-Glass Construction?

Mr-Glass enclosures have been installed in a lot of Southern Nevada homes, and the hardware on them is specific. Frameless systems use hinge and bracket assemblies anchored into tile or stud; semi-frameless sliders use top rails, bottom tracks, and roller carriages that wear in a predictable way. Our technicians know those assemblies by sight and know which Mr-Glass parts are still produced versus discontinued, which is the difference between a like-for-like repair and a workaround that fails in a year.
We source genuine Mr-Glass hardware – hinges, rollers, sweeps, seals – where it’s available, and quality aftermarket parts only when an OEM piece is no longer made. We do not claim to stock Mr-Glass parts locally; parts for your job are identified at diagnosis and sourced for that specific model.
Warranty-safe practice is part of the job. We don’t drill new holes in a tempered panel, we don’t substitute a hinge that changes the load path, and we don’t re-seal a chipped panel and call it done. Every project comes with a written price before any tool is unpacked, and The Threshold Standard means the technician arriving at your door is background-checked, identity-verified, in a clean marked uniform with a photo ID badge, and introduced to you by name and photo before the visit. Every completed project carries a written guarantee, and if a repair or installation fails, we return once at no charge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Fix in Enterprise
Enterprise housing stock is mostly two-story stucco-on-frame tract homes built by production builders from the late 1980s through the 2000s, and the original bathrooms in those homes are now hitting the age where Mr-Glass enclosures show real wear. Here’s what we see most.
- Hard-water etching and clouding on frameless glass. Clark County water is calcium-heavy, and it leaves mineral film on shower glass fast. Left alone, that film etches into the surface and no amount of polishing brings the clarity back. Clouding that wipes away is film. Clouding that stays after a proper clean is etched glass.
- Roller and track wear on semi-frameless sliding doors. Older Mr-Glass sliders drift, bind, and hang off plumb because the roller carriages flatten and the bottom track accumulates mineral grit. Homeowners often assume the glass is warped. It’s almost always the hardware.
- Failing silicone seals and sweeps at the door-to-wall junction. The sweep at the bottom of the door and the silicone at the wall junction take the most water contact. When they fail, water migrates behind the enclosure and stains drywall and grout lines. This is a cheap fix caught early and a costly one caught late.
- Hinge and bracket loosening on frameless units. The anchor points work free over time as the enclosure cycles through thousands of opens and the thermal movement of a desert bathroom works on the fasteners. A door that sags or won’t close flush is usually a loose anchor, not a bent panel.
- Chipped or cracked tempered panels. Tempered glass that takes an impact at an edge or around a hinge cutout can fail suddenly. A chip near a hinge or bracket is not a cosmetic issue. It’s a replacement decision.
Mr-Glass Parts & Our Repair-vs-Replace Approach

The parts question drives the whole decision, so we start there. Genuine Mr-Glass hinges, rollers, sweeps, and seals give a like-for-like fit and keep the enclosure operating the way it was engineered. When an OEM piece has been discontinued, we use quality aftermarket hardware that matches the load and geometry, and we tell you plainly that it’s aftermarket so there are no surprises later.
Repair is the right call when the glass is sound and the problem is hardware or seals. Replace is the right call when the tempered panel is chipped at an edge or hinge point, or when etching has gone past the surface and polishing won’t restore clarity. Re-sealing a compromised panel is not a repair. It’s a delay. A written price before any work starts covers both paths, so you can see the numbers side by side and decide. Call (844) 797-6157 for a free estimate and we’ll walk you through which side of that line your enclosure falls on.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We inspect the glass surface under light for etching depth, check the hinges, brackets, and wall anchors for movement, and test the rollers and track on sliding units. We identify the specific Mr-Glass model or series so parts can be matched correctly.
- 2
Written price. Before any work starts, you get the repair or replacement price in writing, line by line, including the parts path (OEM or aftermarket) and what the guarantee covers.
- 3
Repair or install. Hardware replacement, re-anchoring, or full enclosure installation with new sweeps and a fresh waterproof silicone seal at every junction. Exterior-adjacent glass work gets scheduled for early morning in Enterprise summers, since cure times shift above 105°F.
- 4
Test. Door swing, panel alignment, track travel, and a live water test at the seals. We don’t leave until the enclosure closes clean and stays dry.
- 5
Warranty. Every completed project carries a written guarantee with stated terms, and the 365-Day Done Right Promise means if the work isn’t right within a year of completion, we make it right at no cost to you.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Enterprise
We work across the Mr-Glass product families common in Enterprise bathrooms and homes: Frameless Shower Enclosure systems, including hinge-mounted and bracket-anchored configurations; Semi-Frameless Sliding Shower Doors with top-rail and bottom-track assemblies; Custom Mirrors and Wall Mirror Panels; and Glass Shelving and Cabinet Glass Inserts. Most of what we’re called out for falls into three jobs – frameless glass shower enclosures, walk-in shower installation, and bathroom vanity installation where a new vanity changes the mirror and enclosure layout. If your Mr-Glass product isn’t listed, tell us the model at the estimate and we’ll confirm coverage.

We Also Service These Brands
Mr-Glass is a focus, not a limitation. Mason Remodeling Enterprise also works with KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures, so a bathroom project that touches the shower, the vanity, and the mirror can be handled as one scope instead of three separate trades. That matters in Enterprise tract homes, where a shower replacement often triggers a vanity swap and a mirror re-hang in the same room.
FAQs – Mr-Glass Construction Service in Enterprise

Is Mason Remodeling Enterprise authorized by Mr-Glass? No. We’re an independent Mr-Glass service provider and are not affiliated with or authorized by the manufacturer. That independence is deliberate: it lets us recommend the honest repair-versus-replace path without a dealer program steering the answer.
Do you use genuine Mr-Glass/OEM parts? Yes, wherever they’re available – hinges, rollers, sweeps, and seals. When an OEM part has been discontinued, we use quality aftermarket hardware and tell you clearly that it’s aftermarket. We don’t claim to stock Mr-Glass parts locally; parts are identified at diagnosis and sourced for your specific model.
How long does Mr-Glass service take? Hardware and seal repairs are typically a single visit. A full enclosure installation runs longer once the site is measured and the panel is ordered. You’ll get the schedule in writing before work starts. Call (844) 797-6157 for an exact timeline on your job.
What Mr-Glass models/series do you cover? Frameless Shower Enclosure systems, Semi-Frameless Sliding Shower Doors, Custom Mirrors and Wall Mirror Panels, and Glass Shelving and Cabinet Glass Inserts. Tell us the model at the estimate and we’ll confirm parts availability.
Will service void my Mr-Glass warranty? We work warranty-safe: no new holes in tempered panels, no substitute hardware that changes the load path, and no re-sealing over chipped glass. We can’t speak for the manufacturer’s warranty terms, but our work is done so the enclosure stays within its engineered configuration. Every project carries our own written guarantee regardless.
How much does Mr-Glass construction cost in Enterprise? It depends on whether you’re repairing hardware or replacing glass. Here are the ranges we quote in Enterprise:
| Service | Price Range (Enterprise) |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
Every price is written before any work starts, with no change orders once the scope is agreed. Call (844) 797-6157 for an exact quote on your Mr-Glass job – estimates are free.
Book Your Mr-Glass Service in Enterprise, NV
Whether your Mr-Glass sliding door is jumping the track, your frameless panel has gone cloudy, or you’re planning a walk-in shower installation in an Enterprise tract home, the next step is a free estimate. A live person answers around the clock. Call (844) 797-6157 and we’ll get your Mr-Glass service on the calendar with a written price before anything starts.
Written by the team at Mason Remodeling Enterprise.












