A Mason company - serving Enterprise, NV
A new rear addition with a vaulted beamed ceiling and tall windows
Dvele · Enterprise, NV

Dvele Construction in Enterprise, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Enterprise
A second-story addition that matches the existing roofline
A wide opening with a new beam where the kitchen wall was removed
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled primary suite with built-in wardrobes and a window seat
New painted shaker cabinets with an organized deep drawer
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Dvele Construction in Enterprise, NV

Mason Remodeling Enterprise provides independent Dvele construction service across Enterprise, NV – we work on Dvele homes and Dvele-style off-site-built construction as an independent builder, not as a factory affiliate. The one thing that makes our Dvele work here different is the ground the house sits on: Enterprise’s caliche layer has to be treated or pre-drilled before grading, and a Dvele’s module foundation pad has to be dead-level before the crane ever lands a box. That single fact reshapes every Dvele project in Enterprise, from seam repairs to kitchen remodels.

professional general contractor service in Enterprise, NV

Call (844) 797-6157

We read shop drawings. We read module connection details. We don’t treat a Dvele like a stick-framed tract home, and we don’t imply the factory warranty runs through us. If you own a Dvele in Enterprise and something at a module seam, a roof penetration, or a kitchen run has started talking to you, call (844) 797-6157 to schedule a free estimate.

Why Enterprise Residents Choose Us for Dvele Service

A garage converted into a guest room and home office

Most contractors in Enterprise have never opened a Dvele shop drawing. We have. A Dvele is a factory-built modular house – the LUMEN series, the self-powered solar-plus-battery line, and the two-story modular plans configured for narrow infill lots all share the same logic: the box leaves the factory complete, and everything that happens on your lot is either foundation, connection, or field-finished detail. Knowing which is which is the whole job.

That matters in a city built for tract homes. Production builders in Enterprise poured thousands of near-identical stucco-on-frame two-story houses between the late 1980s and the 2000s, and the trades here have muscle memory for that construction. A Dvele isn’t that. We bring up to 22 years of technician experience to reading those connections, matching parts to the factory-specified profile instead of a generic substitute, and scheduling work around the valley’s thermal realities.

Every crew member who arrives at an Enterprise Dvele is background-checked, identity-verified, and introduced to you by name and photo before the visit – part of what we call The Threshold Standard. A photo ID badge at the door. A written price before any tool is unpacked. That’s the baseline we hold on every Dvele job in Enterprise, and it’s a fair reason to call us rather than the contractor who mostly does tract-home re-pipes.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Dvele Construction Problems We Solve in Enterprise

Dvele homes fail differently than tract homes. Here’s what we see most in Enterprise, and why each one shows up here specifically:

  • Module-to-module and module-to-foundation seam failures. Factory sealants and gaskets were compressed and cured in a coastal factory climate. Under Enterprise’s single-digit humidity and 105°F+ summers, they dry out fast. Within a few seasons you see hairline gaps at ceiling lines and exterior joint trim, and it reads as structure when it’s actually dried sealant doing what dried sealant does.
  • Stucco and exterior joint transitions at module marriage lines. Panels arrive pre-finished, so the only field-applied sealant lives at those joints – and those joints take the full thermal swing of a Las Vegas valley day. It’s the first place Enterprise homeowners see cracking or a water path during a monsoon blow. Thermal cycling, not moisture, drives the failure.
  • Solar/battery raceway and roof penetration leaks on self-powered models. Conduit and flashing details set for a factory roof build need re-checking against the intense UV load here. Failed sealant at those penetrations is a recurring leak source, and it can read as a roof failure when the roof deck itself is sound.
  • Interior finish movement at module boundaries. Drywall butt joints and trim at module edges open up seasonally in this low-humidity climate. Factory cabinet runs plumb to a square module can read out of plane once the house settles on desert soils, showing up as a visible gap along a counter edge.
  • Deferred exterior detail work. Because Dvele homes arrive factory-finished, few Enterprise owners budget for the field-touch items – joint sealant refresh, flashing checks, trim touch-up – the way a tract-home owner budgets for paint. Skipping that maintenance is what turns a five-dollar problem into a repair line item.

Dvele Service in Enterprise: What Local Conditions Mean for Your Equipment

A room opened to the studs with new wiring and plumbing

Enterprise sits on a caliche layer that routinely has to be chemically treated or pre-drilled before grading, and inspectors here expect it addressed in the grading plan. That matters more for a Dvele build than for a tract home, and this is the local insight most contractors miss. A tract house is stick-framed on site, so minor pad imperfection gets absorbed by the framing tolerances. A Dvele’s modules land on a foundation pad that has to be dead-level and correctly set before the crane arrives. Caliche remediation is a schedule item on a Dvele in Enterprise, not a footnote.

That same pad matters years later. When we walk a Dvele in Enterprise to diagnose a seam gap, we check the foundation pad and anchor points first – because under a perfectly stable house, seam movement points to gaskets. Under a house that has moved, it points to the pad. Caliche-driven schedule changes during the build, thermal cycling afterward, and the valley’s low humidity all stack up at the same joint lines. Knowing which one is doing the damage is what separates a targeted repair from a rebuild.

Dvele Models & Products We Service in Enterprise

We service the Dvele self-powered modular line with its solar-plus-battery integrated design, the Dvele LUMEN series, and Dvele two-story modular plans configured for narrow infill lots. For each, our parts approach splits along one line: connection parts get factory-matched, finish parts get quality aftermarket.

That means seam gaskets, flashing boots, and connection hardware are matched to the factory-specified profile rather than a generic substitute. A wrong-profile gasket is the first thing that fails. Trim, sealants, fixtures, and interior finishes can be spec-grade aftermarket – we work with Cambria, Silestone, Caesarstone, Kohler, Moen, Toto, and Grohe on the interior side, and we won’t put a generic flashing boot on a Dvele factory penetration. Parts are sourced per job; we don’t keep a Dvele stock in Enterprise.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Dvele Service Pricing in Enterprise

A framer checking new wall framing on a home addition

Enterprise Dvele pricing follows the same market-calibrated ranges we use across every job in the valley. Here’s what you can expect before you call:

Service Typical Enterprise Range
Kitchen Remodel $14000 – $45000
Roof Repair $400 – $1800
Walk-In Shower Installation $4500 – $12000
Cabinet Installation $4000 – $13000
Countertop Installation $2000 – $6500

What drives Dvele jobs toward the top of a range: seam access (a two-story module marriage line takes longer to reach and reseal than a single-story one), whether a roof penetration needs flashing replacement, and whether cabinet runs need refinished plane correction to the module. A free estimate here includes a walk of the seams and penetrations, a foundation pad and anchor check, and a written line-item price before any work starts – not a verbal number that grows on the final bill. Call (844) 797-6157 for a free estimate on your Enterprise Dvele.

Serving Enterprise, NV – Our Local Coverage Area

We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Dvele Construction in Enterprise

Service Areas Near Enterprise

We serve Dvele owners across Enterprise and the surrounding valley, including the Enterprise service area stretching from the 215 and Blue Diamond corridors into Silverado Ranch and Mountain’s Edge. Nearby coverage extends to Spring Valley, Paradise, Summerlin, Winchester, and Henderson – all within reach for a free estimate. If you’re outside Enterprise, call us and we’ll confirm coverage before scheduling.

For the deeper technical side of our Dvele work – model lines, connection details, and parts matching – see our Dvele service overview.

Book Your Dvele Service in Enterprise Today

Call (844) 797-6157 to schedule your free estimate on any Dvele construction, kitchen, roof, or shower project in Enterprise. A live person answers every call, 24 hours a day. We’ll arrive background-checked, introduce ourselves by name and photo first, and hand you a written price before any work starts – then back it with the 365-Day Done Right Promise.

Written by the team at Mason Remodeling Enterprise.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A dining nook with a built-in banquetteAn open kitchen and dining area after a remodelA freestanding soaking tub in a remodeled primary bathroomA whole-home remodel with the living, dining and kitchen areas opened upA galley kitchen opened up to the dining room with a new peninsulaA remodeled hall bathroom with patterned floor tile and painted walls

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Enterprise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Enterprise team

A local vetted partner works across Enterprise and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Enterprise? Licensed & insured · free written estimates
Call (844) 797-6157
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Mason Remodeling Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch