







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Kitchen Remodeling: The Enterprise Owner’s Guide
We install and replace Wellborn-compatible kitchen cabinetry and the parts that fail around it, with a typical installed kitchen remodel in Enterprise running $14,000 – $45,000 depending on layout, door style, and surface choices. If a Wellborn door has delaminated, a drawer box has cracked at the corner, or a hinge and glide have worn out, we’ll look at it, price it in writing, and tell you honestly whether the part is worth replacing or whether the cabinet run is due for more. Call (844) 797-6157 to schedule a free estimate.

Most Enterprise homeowners find out something’s wrong the same way: a raised-panel door that sat flat through a mild spring starts to separate at the rail the first July the house hits 108°F. Others notice a soft-close glide that no longer catches halfway, or a door that won’t stay shut because the hinge cup has pulled loose from swollen particleboard. Wellborn builds a solid cabinet, and most of what fails here fails because of the desert, not the brand.
Which Wellborn Models This Applies To

Wellborn Cabinet makes several distinct lines, and the parts don’t cross over between them. The three you’ll see most in Enterprise kitchens are the Premier series, the Select series, and the full-access frameless line Wellborn sells as its modern option. Door style matters as much as series: a raised-panel oak door from one collection uses a different hinge cup bore than a slab door from another, even within the same line.
The easiest way to identify what you have is to open a base cabinet and look for the spec sheet glued inside the door or on the back of the cabinet box. That sheet carries the collection name and the finish code. If it’s gone, measure the opening and the door overlay: Wellborn’s standard overlay is 1-1/4 inches on the full-overlay lines, which tells your installer you’re working with a European-style hinge rather than a face-frame American pattern.
On the OEM-versus-aftermarket question, our honest position is this: buy OEM when the part is visible. A Wellborn-matched door or drawer front has to match the finish and the grain, and nothing aftermarket gets you there. For hinges, glides, and shelf clips behind a closed door, a quality Blum or Grass equivalent is often sturdier than what came with the cabinet, and costs less. We use OEM for anything you can see, and we’ll say so plainly when a better-priced equivalent will do the same job.
Mason Remodeling Enterprise is an independent service provider, not affiliated with Wellborn Cabinet. We work with their products the same way we work with KraftMaid, Cambria, and Silestone: as a professional installer who knows the specs.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Kitchen Remodeling Is Failing
Here’s what a failing cabinet part looks like when it’s genuinely a failure, and what’s causing it.
- Door face separating from the frame at a joint. In Enterprise, this is almost always thermal cycling. Desert cabinets expand and contract every day, and a glued rail joint that was fine in a climate-controlled showroom starts to open within a few summers. Once the joint opens, moisture gets in and the gap widens.
- Soft-close drawer glide that slams or sticks. The damping cylinder inside the glide has worn out. Wellborn’s glides are rated for tens of thousands of cycles, but a heavy pot drawer in a busy household uses up that life faster than a light one.
- Hinge cup pulling out of the door with a chunk of wood. This is a screw failure in particleboard or MDF, usually because the door has been over-weighted or someone leaned on it. The hinge itself is fine; the mounting hole is gone.
- Door warping or bowing along the length. Heat and a door that faces a west window all afternoon will cup over time. A slight bow you can see by eye is worth replacing; a hairline you have to hunt for isn’t.
- Shelf sagging under canned goods. Wellborn’s standard shelves are 3/4-inch, adequate for most loads, but a wide pantry shelf in a 24-inch cabinet will deflect under heavy cans over several years. A mid-span support or a thicker aftermarket shelf solves it.
One thing worth knowing: cabinetry in Enterprise that sits against a west- or south-facing exterior wall runs hotter than the rest of the kitchen. If the failures cluster on one side, that’s the reason, and it’s worth mentioning when you call.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what things actually run in Enterprise, parts and labor included.
| Project | Installed Price Range |
|---|---|
| Cabinet installation (full run) | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
What drives the range: cabinet line and door style, whether the layout changes (moving a sink or range costs more than swapping boxes in place), surface material, and how much of the old kitchen has to come out. A single drawer front or a set of hinges sits far below the bottom of these ranges; we’ll quote that separately.
Every project gets a written price before any work begins, with parts and labor broken out line by line. You see what the Wellborn replacement door costs and what installing it costs. There’s no surprise on the final invoice. Our 365-Day Done Right Promise covers the work for a full year from the completion date; if something we installed fails in that window, we come back and fix it at no charge.
DIY or Call Us?
Some of this is genuinely fine to do yourself. Swapping a shelf clip, adjusting a hinge with a screwdriver, or replacing a soft-close glide on a standard drawer box is a 10-minute job with the right part in hand. If you can read the model number off the spec sheet and match it, you can often handle it.
Where it goes wrong: replacing a hinge when the mounting hole has failed, because the fix isn’t a new hinge, it’s filling and re-drilling the hole correctly, and a bad repair means the door falls off again in a month. Refacing or replacing doors on an existing cabinet run is harder than it looks, because the new fronts have to match the box dimensions exactly or nothing closes squarely. And anything involving a gas range or the wiring behind an over-range microwave deserves a licensed trade, not a weekend. If you’re not sure whether your job is the 10-minute kind, call us and we’ll tell you straight.
Call (844) 797-6157 for a free estimate. We answer live, any hour, any day.
FAQs

A well-made cabinet box should hold up 20 to 30 years; the parts inside it wear faster. Glides and hinges typically need replacing every 8 to 12 years in a busy kitchen, and door finishes in a hot, dry climate like Enterprise can dull or separate sooner than in milder regions. Call (844) 797-6157 for an exact quote on replacing yours, free.
Sometimes, yes. A pulled hinge hole can be filled and re-drilled; a single cracked drawer box can be rebuilt rather than replaced. A delaminated door face or a badly warped door is generally a replacement, because the repair won’t hold. We’ll tell you which case you’re in before you spend anything.
Replacing doors and drawer fronts on a standard kitchen typically takes one day; a single door or drawer is a same-visit job. Full cabinet installation runs several days depending on the size of the run and whether countertops are involved, since the counter has to be templated and installed after the boxes are set.
We order through professional cabinetry channels using the collection name and finish code off your cabinet’s spec sheet, so the part matches what you have. If the collection has been discontinued, we’ll tell you and walk through the closest current match before you commit. Call (844) 797-6157 to schedule a free estimate and we’ll identify your cabinet line on the visit.
Mason Remodeling Enterprise works on Wellborn cabinetry across the valley, and we’re happy to look at a single failing door or a whole kitchen. Every technician arrives in a marked uniform with a photo ID badge, and you’ll get their name and photo before the visit, so you know exactly who’s coming to your door. Call (844) 797-6157 to schedule your free estimate.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












