







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Bathroom Remodeling: The Enterprise Owner’s Guide
We install Wellborn-compatible bathroom remodeling built around your existing cabinet layout, and a full bathroom remodel in Enterprise typically runs $9,000 – $28,000 installed, with smaller baths landing in the $5,000 – $12,000 range. If a cabinet door is sagging, a drawer box is grinding, or a finish is blistering near the shower, we can match the replacement part to your Wellborn series and give you a written price before anything is ordered. Most Enterprise owners discover the problem the same way: a soft-close hinge stops cushioning, the door drifts open on its own, and within a few weeks the reveal line at the cabinet face is visibly crooked.

Which Wellborn Models This Applies To

Wellborn Cabinet builds across several lines, and the part that fits a maple shaker door from one series won’t necessarily fit another. The most common families we see in Enterprise bathrooms are the all-plywood cabinet and vanity lines, where the box construction is different from the entry-level particleboard boxes sold at big-box stores. That difference matters at replacement time: hinge cup bore patterns, shelf-pin spacing at 32mm, and drawer glide mounting positions are specific to the box, not the door style.
To identify what you have, open a door and look for the manufacturer label stapled inside the cabinet or printed on the back panel. Failing that, measure the hinge cup bore (most are 35mm), the door overlay, and the drawer box width and depth to the nearest millimeter. Write those numbers down before you call anyone.
For Wellborn specifically, the OEM-versus-aftermarket call usually comes down to finish match. Wellborn’s factory finishes are catalyzed and sprayed in a controlled environment, and an aftermarket door in the same named color will read slightly different under Enterprise’s hard desert daylight. Where a part is structural (glides, hinges, shelf supports), a quality aftermarket equivalent performs fine. Where it’s a visible face, we lean OEM. We’re an independent service provider and not affiliated with Wellborn; we match parts to your cabinet, we don’t speak for the manufacturer.
The same matching logic applies to the other cabinetry brands we work with, including KraftMaid, and to the surfaces that sit on top of them – Cambria and Silestone among them.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Bathroom Remodeling Is Failing
Bathroom cabinetry in Enterprise lives a harder life than kitchen cabinetry, and the symptoms show up in a predictable order.
- Soft-close hinge no longer cushions. The damper cylinder inside the hinge has worn or the fluid has dried out. Common after years of daily use, and worse in bathrooms where humidity swings are constant.
- Door drifts open or hangs crooked. The hinge plate screws have pulled or the cup has cracked the door material around the bore. Once that bore cracks, adjusting the hinge won’t fix it – the door needs replacing.
- Drawer glides grind or the box racks side to side. The glide race has worn flat or a mounting screw has stripped out of the box side. In Enterprise, the dry air plus seasonal monsoon humidity loosens cabinet joints faster than homeowners expect.
- Finish blistering, peeling, or chalky near the shower. Water vapor and cleaning products have gotten past the topcoat. Once the finish lifts at an edge, it keeps traveling.
- Shelf sags or the pin punches through. The shelf pin hole has wallowed out, usually from overloaded linen storage. Oversized shelves make this worse because the load sits farther from the pin.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work actually costs in Enterprise, installed, parts and labor together:
- Full bathroom remodel with new Wellborn cabinetry: $9,000 – $28,000
- Small bathroom remodel: $5,000 – $12,000
- Vanity installation (cabinet, top set, plumbed): $800 – $3,000
- Cabinet installation, bath run: $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
What drives the range: door style and finish (a painted shaker costs less than a glazed or stained raised panel), box construction, whether the vanity has to be re-plumbed, and whether the tile or flooring under the old cabinet has to be patched. We give you a written price before any work starts, itemized so you can see the part cost separate from labor. Every project carries our 365-Day Done Right Promise: if the work isn’t right within 365 days of the completion date, we come back and make it right at no cost to you.
DIY or Call Us?
You can safely handle the diagnosis yourself. Open the door, check the hinge cup for cracks, tighten the visible screws, measure the bore and overlay, and photograph the label inside the cabinet. That’s information we need anyway, and it saves a trip.
Where DIY goes wrong: replacing a door or drawer front on a Wellborn box means matching the bore pattern exactly, and a mis-drilled hinge cup ruins the door. If you’re considering anything involving the vanity’s plumbing or the electrical outlet behind it, stop – those are permit-and-licensed-trade work in Enterprise, and a bathroom is a wet location where a bad connection is a real hazard. Our technicians have up to 22 years of experience and we verify every one of them by name and photo before they reach your door.
Call (844) 797-6157 and we’ll give you a written price on the replacement before we order a single part.
FAQs

Expect 15 to 25 years from the cabinet box itself, and 8 to 12 years from soft-close hinges and drawer glides under daily bathroom use. Enterprise’s dry air and monsoon-season humidity swings shorten hinge and glide life more than the wood itself. Call (844) 797-6157 for an exact quote on replacement – estimates are free.
Sometimes. A hinge that’s merely out of adjustment can be re-set, and a stripped glide screw can often be repaired with a larger anchor. A cracked hinge cup bore, a delaminated door face, or a finish that’s already lifting cannot be repaired economically. We’ll tell you which one you’re looking at before you spend anything.
A single door, drawer front, or hinge set is usually a same-visit job of under an hour once the part is in hand. A full vanity or cabinet run replacement is a scheduled project, typically one to three days depending on plumbing and countertop work. We don’t promise same-day on planned remodeling – that’s not how a real install works.
We identify your Wellborn series from the label and measurements, then source through our specification-grade cabinetry partnerships. We don’t claim to carry parts on a truck or stock them locally – parts are ordered to your specific cabinet, which is why we get the measurements right first.
Call (844) 797-6157 for a free estimate. A live person answers every call.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












