







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Driveway & Pavers: The Enterprise Owner’s Guide
If you have a Moen fixture or outdoor element tied into your driveway and paver work, we install and service Moen-compatible components across Enterprise, with paver driveway installation typically running $7,000 – $18,000 installed and coordinating the swap or repair on a scheduled visit. Moen is a plumbing and fixtures brand, so this page covers where Moen products meet hardscape and drainage: hose bibs, sillcocks, frost-free spigots, and the paver aprons around them, plus the driveways and paver surfaces those fixtures sit in. Most Enterprise owners discover a problem the same way: a wet band of pavers near the house that won’t dry, a hose bib that drips after the handle is off, or a settled edge where the driveway meets the garage slab.

Key Takeaways
- Moen makes the fixtures and valves; we handle the paver, drainage, and grading work around them.
- Paver driveway installation in Enterprise: $7,000 – $18,000. Sealing: $250 – $700.
- A written price before any work starts, and a 365-Day Done Right Promise on the finished job.
Which Moen Models This Applies To

Moen’s outdoor line is where the overlap with driveways and pavers gets real. The most common pieces we see in Enterprise are frost-free sillcocks (models like the 4-inch and 6-inch anti-siphon versions), quarter-turn hose bibs, and the Moen outdoor and utility spigots that feed irrigation or a hose reel at the driveway edge. The trick is identifying the right part before you buy.
Here’s the compatibility gotcha most people miss: frost-free sillcocks are sized by the length of the shank that reaches into the wall, not the handle. A 4-inch unit on a 6-inch wall leaves the valve body too far out and stresses the joint where it meets the siding. Measure the wall thickness at the penetration, not the old valve’s outside length. The model number is usually stamped on the brass body, behind the handle, or on the flange plate.
On the OEM-versus-aftermarket question for Moen specifically: Moen’s own replacement cartridges and repair kits are worth the small premium because the internal cartridge geometry is proprietary. Generic cartridges often fit the threads but seat differently, which shows up as a drip that returns in a few months. For the paver and drainage side, we work with specification-grade hardscape lines like Belgard, Unilock, and Techo-Bloc. We’re an independent service provider and not affiliated with Moen, so we source the right part for your model rather than pushing a single line.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Moen Driveway & Pavers Is Failing
Five symptoms we see regularly on Enterprise properties, and what’s usually underneath each one:
- A wet or dark band of pavers against the house. Water is escaping a sillcock connection or a buried line and wicking through the bedding sand. Moen spigot drips at the wall penetration are a frequent cause.
- The hose bib drips after the handle is closed. A worn internal cartridge or seat, common as the rubber hardens. A fresh Moen cartridge usually resolves it.
- Pavers heaving or settling near the driveway apron. Poor drainage or a failed base layer, not the pavers themselves. In Enterprise, summer ground movement and monsoon runoff both accelerate this.
- Efflorescence (white chalky film) that keeps returning. Moisture trapped under the pavers is pushing salts to the surface. It points to a drainage problem rather than a cleaning problem.
- Pooling water on the drive after rain or irrigation. Grading that has drifted from the original slope, often combined with an outdoor fixture throwing water where it shouldn’t.
If two or more of those show up together, it’s usually one water source causing all of it, and the fix is cheaper than it looks once you stop the leak first.
Replacement Cost & What’s Included
Here’s how the numbers land for Enterprise homeowners. We give real ranges so you can self-qualify before you call.
| Work | Installed Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
The range on a paver driveway is driven by square footage, base depth, the paver line you choose, and how much grading or drainage correction the site needs. A Moen sillcock swap is a small line item on top, and we price it as parts plus labor with the part shown on the quote. Every project gets a written price before any work begins, and the finished work is covered by the 365-Day Done Right Promise. If a repair or installation fails within 365 days of completion, we come back at no charge.

See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some checks are safe and worth doing yourself. Turn the hose bib on and off and watch for a drip after the handle closes. Look for a water stain line on pavers near the house. Check whether water pools in one spot after rain. Those tell you what’s wrong without opening anything.
Where DIY goes wrong: replacing a frost-free sillcock means shutting off the supply, cutting back the penetration, and reseating the joint so it doesn’t leak inside the wall. Get it wrong and you’re looking at water in the wall cavity, not a wet paver. Paver base and grading failures can’t be fixed by adding sand; they need the base rebuilt, and that’s a machine-and-labor job. When in doubt, call us at (844) 797-6157 and we’ll tell you honestly whether it’s a small job or a bigger one.
FAQs

A Moen frost-free sillcock typically lasts 10 to 15 years before the cartridge or seat needs attention, and a properly installed paver driveway lasts 25 to 30 years with periodic sealing. Enterprise’s summer heat and monsoon runoff stress both, so sealing every few years extends the pavers. Call (844) 797-6157 for an assessment.
Often yes. A dripping Moen spigot is usually a cartridge swap, and localized paver settling can be lifted and re-bedded without replacing the whole drive. We’ll give you the repair option and the replacement option side by side. Estimates are free.
A Moen sillcock replacement is a short scheduled visit, while a paver driveway runs several days depending on square footage and base work. We’ll give you the timeline in writing on the quote. Call (844) 797-6157 to schedule.
We match your model number to the correct Moen replacement part and source it before the visit, then bring the right piece for your wall thickness and fixture. We don’t carry parts on a truck; we confirm the part first. Call (844) 797-6157 to get started.
We also service KraftMaid, Cambria, and Silestone products for Enterprise homeowners.
Ready to Get a Written Price?
Whether it’s a dripping Moen spigot at the driveway edge or a paver surface that needs rebuilding, we’ll tell you what’s wrong and put the price in writing before a single tool comes out. A live person answers every call, around the clock. Call (844) 797-6157 for a free estimate in Enterprise, and we’ll schedule your visit.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












