







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
American Standard Kitchen Remodeling: The Enterprise Owner’s Guide
Kitchen remodeling built around American Standard fixtures and fittings in Enterprise typically runs $14,000 to $45,000 installed, with small kitchens landing at $9,000 to $20,000. We’re an independent service provider, not affiliated with American Standard, and we install American Standard-compatible kitchen components plus KraftMaid cabinetry and Cambria or Silestone surfaces. Scheduling is planned work, not same-day: you get a written price before any tools come out, then a crew date. Most Enterprise owners arrive here after a specific failure: a faucet that drips from the base, a drain assembly that won’t seal, a supply line weeping under the cabinet, or a fixture that no longer matches the sink cutout after a countertop change. That’s usually the moment a small repair turns into a kitchen decision.

Which American Standard Models This Applies To

American Standard kitchen products split into a few families Enterprise homeowners run into most: the Colony and Reliant faucet lines, the Pekoe and Fairbury sink series, and the parts ecosystem that follows them – cartridges, aerators, spray heads, drain assemblies, and supply lines. The compatibility gotcha is the cartridge. American Standard has used several cartridge generations across faucet lines, and two faucets that look identical from the handle side can take different cartridges. Model numbers live on a label under the sink rim, on the faucet shank, or inside the cabinet door on the spec sheet the builder left behind. Photograph that label before you call anyone.
On sinks, the measurement that matters is the cutout, not the basin. An American Standard undermount sink swap needs the template dimensions and the cabinet’s interior width – a 33-inch sink in a 30-inch cabinet is a non-starter. OEM versus aftermarket is a real decision here: American Standard OEM cartridges fit first time and carry the manufacturer’s coverage, while quality aftermarket equivalents cost less and work fine when the part number matches exactly. We’ll tell you which one we’d put in our own home. We don’t stock parts and we don’t carry parts on a truck – the part is sourced to your model number before the visit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your American Standard Kitchen Remodeling Is Failing
- A drip from the faucet base, not the spout. That’s usually an O-ring or cartridge seal, not the aerator. Left alone, water tracks under the deck plate and into the cabinet.
- The handle feels loose or grinds when you turn it. A worn cartridge or a scored stem. Grinding is the sound of metal-on-metal, and it gets worse with every use.
- Weak or split spray from the pull-down head. Mineral buildup from Enterprise’s hard water, or a failing diverter. Soaking helps for a while; the diverter eventually sticks.
- Water pooling in the cabinet under the sink. A failing drain assembly or supply line connection. This one can quietly rot the cabinet floor before you notice.
- The sink rocks or the sealant line has gone dark. A failed undermount clip or degraded sealant. In this climate, sealant near a window-facing sink takes a beating from sun and dry air.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing in Enterprise, parts and labor together:
- Kitchen remodel, full scope: $14,000 – $45,000
- Small kitchen remodel: $9,000 – $20,000
- Cabinet installation: $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
What drives the range: cabinet box count and door style, whether the countertop is a standard Cambria or Silestone slab or a remnant, sink and faucet cutout changes, and whether electrical or plumbing lines have to move. Sourcing an American Standard part to a model number is included in the quote, not billed as a separate trip. Every project gets a written price before work starts – line items, not a verbal ballpark that grows later. Workmanship is covered by our 365-Day Done Right Promise: if something we installed isn’t right within a year of completion, we make it right at no cost.
DIY or Call Us?
You can safely do a few things: photograph the model label, measure the sink cutout, shut off the supply valves and check for weeping connections with a dry paper towel, and swap an aerator or a pull-down spray head that threads on by hand. Where it goes wrong is inside the wall or under the cabinet – a seized shutoff valve that snaps when you turn it, a cartridge that won’t budge and takes the valve body with it, a drain assembly that needs the old putty scraped and reseated. Those turn a $40 part into a cabinet floor and a drywall patch. If the valve doesn’t turn freely, stop and call. Reach us at (844) 797-6157 and we’ll talk through whether it’s a part swap or a bigger job before anyone comes out.
FAQs

Expect 10 to 15 years for a quality faucet body, with cartridges and aerators typically needing attention every 5 to 8 years. Enterprise’s hard water shortens cartridge life because mineral scale builds on the ceramic disc, and the dry desert air dries out rubber seals faster than in humid climates. A faucet that’s 12 years old and dripping usually needs a cartridge, not a new faucet. Call (844) 797-6157 for an exact quote – estimates are free.
Often yes. A cartridge, aerator, O-ring, spray head, or drain assembly is a repair, and the faucet body stays. Replacement makes sense when the valve body is cracked, the finish has failed, or the sink cutout no longer matches the fixture you want. We’ll tell you which one you’re looking at before quoting anything. Call (844) 797-6157 to schedule a free estimate.
A faucet or fixture swap is typically a single visit of one to three hours, and a sink replacement with cutout work runs most of a day. A full kitchen remodel is a multi-day, multi-week project scheduled around your kitchen being usable – we’ll give you the sequence in writing. Call (844) 797-6157 and we’ll scope it honestly.
We look up the part against your model number from the label under the sink or on the faucet shank, then source OEM or a quality aftermarket equivalent and tell you which is which and what each costs. We don’t stock parts and we don’t carry them on a truck, so the part arrives matched to your fixture rather than “close enough.” Call (844) 797-6157 for a free estimate.
If your American Standard fixture is the reason your Enterprise kitchen needs attention, or the kitchen is ready for a bigger change, call Mason Remodeling Enterprise at (844) 797-6157 for a free estimate. You’ll get a written price before any work starts, a crew member introduced by name and photo before the visit – that’s The Threshold Standard – and a live person on the phone around the clock. Our technicians have up to 22 years of experience, and every project is backed by our 365-Day Done Right Promise.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












