







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Bathroom Remodeling: The Enterprise Owner’s Guide
Schluter bathroom remodeling in Enterprise typically runs $9,000 – $28,000 installed, depending on shower size, tile selection, and whether we’re rebuilding a failed waterproofing system or starting fresh. Most Enterprise homeowners land in the $12,000 – $18,000 range for a full hall bath. We build every shower on a Schluter-certified waterproofing assembly, and unlike a general handyman, we understand the membrane, drain, and trim specs that make the warranty hold.

You usually find out something is wrong the same way everyone does. A grout line near the shower floor turns dark and stays dark. The tile at the curb sounds hollow when you tap it. Or you pull back a bath mat and see a soft, discolored patch on the subfloor that wasn’t there last year. In Enterprise’s dry desert climate, we see these failures more often from thermal movement and slab cracks than from humidity – the opposite of what most online guides assume.
Which Schluter Models This Applies To

Schluter isn’t one product – it’s a family of components, and each one has its own identification method. Here’s how to tell what you’re looking at:
- KERDI membrane: The orange fleece-backed sheet behind your shower tile. If you can see the printed grid and the word KERDI along an edge or in an unused corner, that’s the waterproofing. It doesn’t have a “model number” the way an appliance does, but the roll width (typically 3′ 3″ or 5′) and the fleece texture help confirm you’re looking at genuine KERDI and not a generic substitute.
- KERDI-DRAIN: The drain assembly. The flange shape and the bonding fleece collar are your identifiers. Older installs sometimes used a clamping-ring drain under the membrane instead, which is a different repair path entirely.
- SCHIENE, JOLLY, RONDEC: The metal edge trims. Measure the profile height (common sizes run 5/16″, 3/8″, 1/2″) and note whether it’s anodized aluminum, PVC, or stainless. The trim must match the tile thickness or the reveal looks wrong.
- DITRA: The uncoupling mat under floor tile. Small square grid pattern, typically orange. If your bathroom floor has cracked tile in a straight line, DITRA may be missing or improperly installed.
On OEM versus aftermarket: Schluter’s own components are the only ones that carry the system warranty, and mixing brands mid-assembly voids it. Generic uncoupling mats exist and cost less, but they don’t carry the same fleece bond or the same drain compatibility. We source genuine Schluter components for Enterprise projects and won’t substitute without telling you first. Mason Remodeling Enterprise is an independent service provider and is not affiliated with Schluter Systems.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Bathroom Remodeling Is Failing
- Dark or receded grout at the shower floor. Water is getting behind the tile and the grout is the first thing to show it. If the discoloration returns after cleaning, the moisture is coming from below, not from soap scum.
- Hollow tile at the curb or bench. A hollow sound means the thinset has debonded from the membrane or the substrate has shifted. In Enterprise, slab movement and the seasonal temperature swing from cool nights to 100°F afternoons accelerate this.
- Soft or stained subfloor near the toilet or shower threshold. This is a waterproofing breach, not a surface problem. The KERDI or the drain flange seal has failed and water has been migrating for months.
- Loose or lifting edge trim. SCHIENE or JOLLY that’s popping away from the wall means the bonding flange wasn’t embedded properly or the substrate has moved. It’s cosmetic until water finds the gap.
- Musty smell that returns after cleaning. That’s trapped moisture in the assembly. In a properly waterproofed shower, the cavity stays dry; if it smells, the system is compromised.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Full bathroom remodeling in Enterprise runs $9,000 – $28,000. Smaller baths come in at $5,000 – $12,000. A walk-in shower installation with Schluter waterproofing is $4,500 – $12,000, and a tub-to-shower conversion is $3,500 – $10,000. A vanity swap alone is $800 – $3,000.
What drives the range: shower size and configuration, whether we’re tearing out to the studs, tile selection, drain relocation, and whether the subfloor or framing needs repair once we open the wall.
Every project comes with a written price before any work starts – not a verbal estimate that grows on the final bill. The written price includes the Schluter components, labor, permit coordination, and cleanup. The 365-Day Done Right Promise covers the work for 365 days from completion. If something fails within that year, we come back and make it right at no cost to you.
DIY or Call Us?
Some things you can check yourself. You can tap tile for hollow spots, photograph stained grout, look for visible cracks, and pull up the product labels you can reach. Those observations are genuinely useful when you call.

What you shouldn’t do is try to patch the waterproofing yourself. A KERDI repair done without the proper bonding flange, without the right thinset, and without knowing what’s underneath will hide the problem for six months and then fail again – usually worse. Rebuilding a shower pan is not a weekend project, and getting it wrong means water in your walls and framing. We’ve pulled out plenty of DIY attempts in Enterprise where the fleece was glued instead of embedded, and the subfloor was already soft by the time we got there.
Call (844) 797-6157 and we’ll walk through what you’re seeing, then schedule a free estimate. You’ll know exactly who’s coming – name and photo before the visit, uniform and photo ID badge at the door, per The Threshold Standard.
FAQs

A properly installed Schluter system typically lasts 25 years or more, often the life of the tile. The failure point is almost never the membrane itself – it’s the installation (improper thinset, skipped seams, wrong drain flange) or damage from later work. Call (844) 797-6157 if yours is past 15 years and showing symptoms.
Sometimes, yes. A localized KERDI failure at a single corner or a loose edge trim can often be repaired. Once water has been migrating through the assembly for months, though, the repair scope grows fast. Expect a full shower rebuild in that case. We’ll tell you honestly which one you’re looking at during the free estimate.
A targeted repair takes 1 – 3 days. A full shower replacement with new Schluter waterproofing and tile runs 5 – 10 working days, plus cure time before use. A complete bathroom remodel typically takes 2 – 4 weeks depending on scope and material lead times. We give you a written schedule with the price.
We source genuine Schluter components through professional supply channels, matched to your specific drain, membrane, and trim specs. We tell you which part we’re using and why before we commit the price. If you have an existing assembly and want it matched rather than replaced, we can evaluate that during the estimate.
We also handle other bathroom and kitchen brand work in Enterprise – KraftMaid cabinetry, Cambria and Silestone surfaces – if your project widens during planning.
Call (844) 797-6157 for a free estimate. A live person answers around the clock, every day, including weekends. Our technicians have up to 22 years of experience on projects like yours.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












