







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Kitchen Remodeling: The Enterprise Owner’s Guide
We install Schluter-compatible kitchen remodeling in Enterprise, with full kitchen projects typically running $14,000 – $45,000 and isolated tile or trim repairs starting near $800. Most Enterprise owners discover the problem the same way: a hairline crack appears along the caulk line where the backsplash meets the counter, grout starts crumbling behind the range, or a loose metal edge strip catches a dish towel. By the time the tile sounds hollow under a knuckle, water has usually been working behind it for months. Since 2004 we’ve handled that progression on jobs across the valley, and the fix almost always comes down to which Schluter system was specified and whether it was installed to spec. We’re an independent service provider, not affiliated with Schluter.

Key Takeaways
- Schluter failures in Enterprise kitchens usually trace to movement, moisture, or a trim piece installed over the wrong substrate, not to the product itself.
- Full kitchen work runs $14,000 – $45,000; tile, trim, and membrane repairs cost far less and are quoted in writing before we touch anything.
- Our technicians have up to 22 years of experience identifying which Schluter series is on your wall and matching the replacement correctly.
Which Schluter Models This Applies To

Schluter systems show up in kitchens in three main places, and each has its own compatibility rules. Under tile floors and backsplashes you’ll find an uncoupling or waterproofing membrane (DITRA and KERDI being the most common). Along counters, islands, and the top of a backsplash you’ll find edge profiles: SCHIENE for a straight edge where tile meets drywall, JOLLY for a rounded cap, and RONDEC where the profile wraps a corner. Where the backsplash meets the counter, a movement joint of KERDI-FLEX or a matching sealant does the work that rigid grout can’t.
Identifying what you have: pull the manufacturer print off any leftover box, check the backer on an unused membrane scrap, and measure the finished edge thickness of the profile with a caliper. Schluter edge profiles are sized to a specific tile thickness (common kitchen sizes run roughly 5/16 to 1/2 inch), so a profile made for 3/8-inch tile won’t seat cleanly over 1/2-inch stone. That mismatch is the number-one gotcha we find in Enterprise kitchens.
On the OEM-versus-aftermarket decision: for membranes, stay with the genuine Schluter system. The waterproofing assembly is tested as a complete unit, and a generic mat bonded with the wrong thin-set voids that. For edge profiles, a quality metal equivalent in the correct thickness is a reasonable choice where budget is tight, but confirm the alloy and the sizing before you buy. Our partners on the finish side include KraftMaid, Cambria, and Silestone, and we specify the trim to match whichever surface you choose.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Kitchen Remodeling Is Failing
- Grout cracking in a straight line along the backsplash base. That line is a movement joint that was grouted solid instead of left flexible, and thermal swing between the counter and the wall forces it open.
- Hollow sound when you tap tile near an edge profile. Air has gotten under the membrane or the thin-set coverage was thin at the perimeter, which is where Schluter systems need the most support.
- Water staining or soft drywall below the backsplash. A punctured or lapped-wrong KERDI layer is letting moisture past the waterproofing and into the wall cavity.
- Loose, lifting, or catching edge trim. The profile was set with too little thin-set behind the anchoring leg, so it rocks free as the tile around it moves.
- Mildew in the caulk line that keeps returning after cleaning. Moisture is trapped behind the surface, which points to a membrane or drainage detail that needs opening up, not just re-caulking.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for the Enterprise market, quoted in writing before any tool comes out:
| Scope | Installed range |
|---|---|
| Full kitchen remodel (including Schluter tile work) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Backsplash installation | $800 – $2,500 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: square footage, whether existing tile and membrane have to come out, the profile and surface you choose, and whether the substrate needs repair before new membrane goes down. Our price is itemized – you’ll see parts and labor separately, so there are no surprise line items. Every completed project carries a written guarantee, and if a repair or installation fails within a year we make it right at no cost to you.
DIY or Call Us?
You can safely check a few things yourself: press along the caulk line for soft spots, tap tile with a plastic handle to listen for hollow areas, and photograph the labels on any leftover Schluter packaging. What you shouldn’t do yourself is pull up membrane or reset an edge profile. Removing a bonded uncoupling membrane means cutting through thin-set and often the substrate, and a re-set done over hidden moisture traps the problem instead of solving it. That’s how a $300 trim fix becomes a $2,500 wall rebuild. If the damage has reached drywall, framing, or electrical in the backsplash zone, stop and call us – those are not homeowner jobs.
Give us a call at (844) 797-6157 and we’ll schedule a free estimate. A live person answers around the clock, and before we come out you’ll get the technician’s name and photo, plus a photo ID badge at the door.
FAQs

Installed to spec over a sound substrate, a Schluter waterproofing and tile assembly in an Enterprise kitchen typically lasts 15 to 25 years before the surface needs redoing, and the edge profiles often outlast the tile. Desert heat and dry indoor air cause more movement than people expect, so the flexible movement joints matter. If yours is failing well before that window, the cause is almost always installation, and we can tell you which in one visit. Call (844) 797-6157 for a free estimate.
Often yes. A cracked caulk line, a single loose edge profile, or a small area of hollow tile can usually be repaired without tearing out the whole run, which keeps the cost near the low end of our ranges. What can’t be spot-fixed is a failed membrane behind the wall, because water has already spread beyond what you can see. We’ll tell you honestly which one you’re dealing with. Call (844) 797-6157 to schedule your estimate.
A trim or caulk-line repair is typically a single visit, a backsplash runs a few days, and a full kitchen remodel takes weeks depending on scope. We give you the timeline in the written quote, not a verbal guess. Call (844) 797-6157 for an exact schedule and price.
We match the part to your tile thickness and existing series, measured on site, then source the correct component through professional supply channels – we don’t keep parts on a truck, so the right piece is ordered to your spec. That matters most with profiles, where a wrong-thickness part won’t seat at all. Call (844) 797-6157 and we’ll price the exact replacement for your kitchen.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












