A Mason company - serving Enterprise, NV
A remodeled primary bathroom with a soaking tub and a walk-in shower
Schluter · Enterprise

Schluter Driveway & Pavers in Enterprise, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Enterprise
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A remodeled family room with new windows and a window seat
A wide opening with a new beam where the kitchen wall was removed
A stone counter, tile backsplash and open shelf after a kitchen remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Driveway & Pavers: The Enterprise Owner’s Guide

Schluter profiles and edge trims for driveways and pavers are a specialty finish detail, not a structural part. The installed detail work typically runs $150 to $500 per linear foot when it is tied to a paver or concrete driveway project, and full paver driveway installations in Enterprise run $7,000 to $18,000. We schedule free estimates on your timeline rather than a same-day dispatch rush, because a driveway edge detail is planned work attached to a larger paving job.

professional general contractor service in Enterprise, NV

Call (844) 797-6157

Most owners in Enterprise first notice a failure at the edge. The Schluter strip that was supposed to lock the paver border and seal the transition to concrete, turf or a garage apron has started to lift, powder, or separate. That first loose or chipped corner is your signal. Once the trim is compromised, the pavers beside it start working loose in enterprise summer heat, and the whole border needs attention before it migrates inward.

Key Takeaways

  • Schluter driveway and paver details are finish trims tied to a paving project, priced within a $7,000 to $18,000 paver driveway range.
  • Borders and trim edges are the first place Enterprise owners see failure, and NV sun accelerates it.
  • We are an independent service provider. We are not affiliated with Schluter, and we install trim and paver systems from brands including Belgard, Unilock, and Techo-Bloc.
  • You get a written price before any work begins, backed by our 365-Day Done Right Promise.
  • Our technicians have up to 22 years of experience and are verified by name and photo before arrival.

Which Schluter Models This Applies To

A tile setter installing wall tile in a shower

Schluter makes a lot of edge and transition profiles, and they are not interchangeable between a paver driveway edge and a shower floor. The ones that matter for a driveway and paver job are the heavy-duty trim profiles designed to cap a paver border or bridge the transition between paving and a hard surface. To identify the right one, look at the profile’s dimensions, the height of the paving material it sits against, and whether it is a straight edge or a transition piece.

Measure the thickness of your pavers and the height step to the adjoining surface before you call. Those two numbers narrow the correct profile instantly. The label on the old piece, if it is still readable, usually tells you the series. If it is gone, the measurement does the same job.

On OEM versus aftermarket: for a Schluter trim, matching the exact profile matters more than brand loyalty. A quality aftermarket trim in the correct dimensions can perform fine, but the fit has to be right or the border will lift again. We source professional-grade hardscape materials from Belgard, Unilock, and Techo-Bloc, and we can match a Schluter-compatible trim to your existing paving. We do not stock parts or carry them on a truck. Everything is ordered to your measurement.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Driveway & Pavers Is Failing

  • The trim edge has lifted or separated. The strip no longer caps the paver cleanly, and a gap lets water under the border. In Enterprise, that water freezes and thaws through winter nights, which widens the gap fast.
  • Chipping or powdering at the corner. The finish is breaking down, usually where the trim meets concrete or the garage apron. Chipping means the profile is no longer protecting the paver edge beneath it.
  • Pavers beside the trim are rocking. A loose trim lets the border pavers shift and settle. Once one paver tips, the joint opens and the edge detail stops doing its job.
  • Water pooling or running under the edge. The seal the trim provided is gone. In this climate, moved water carries sediment and undermines the base under the border.
  • Visible rust or discoloration on a metal trim. Metal trim that is showing corrosion is nearing the end of its working life. It is ready to be replaced before the surrounding paving pays the price.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

An open kitchen and dining area after a remodel

The cost to replace a Schluter paver trim and reset the border depends on how much paving has to come up around it.

  • Trim and border reset on an existing driveway: priced within a $7,000 to $18,000 paver driveway range when it is part of a larger project, or quoted as a spot repair when it stands alone.
  • Full paver driveway installation in Enterprise: $7,000 to $18,000.
  • Paver patio installation: $3,500 to $11,000.
  • Driveway sealing: $250 to $700, which we recommend once the border is sound.

What drives the range is how many paver courses have to be lifted, whether the base under the border is still solid, and whether you need the trim reset alone or the whole border rebuilt. You get a written price before any work begins, not a verbal estimate that grows. The work is covered by our 365-Day Done Right Promise for 365 days from the completion date, with the terms stated in writing.

DIY or Call Us?

You can safely check a few things on your own. Look at the trim edge for lifting, chipping, or rust. Measure the paver thickness. Feel whether the border pavers rock. Note where water sits. Those checks are harmless and tell us a lot.

Where DIY goes wrong is the removal and reset. Lifting pavers without disturbing the adjoining paving, resetting the base under a border, and getting a trim seated so it stays put through an Enterprise freeze is finicky work. A poorly seated trim will lift again within one season, and you will have paid twice. Call Mason Remodeling Enterprise at (844) 797-6157. A live person answers every call, and you will know the technician’s name and photo before the visit.

FAQs

A whole-home remodel with the living, dining and kitchen areas opened up

How long does a Schluter paver trim detail last? A correctly installed trim and border can hold for many years. In the Enterprise climate, sun exposure and winter freeze-thaw are the main things that shorten its working life, so proper seating matters more here than in milder regions.

Can it be repaired instead of replaced? Sometimes yes. If the trim is intact and only a few pavers have shifted, resetting the border and reseating the trim may be enough. If the profile is chipped, rusted, or separating along its length, replacement is the honest answer. Call (844) 797-6157 for an exact quote, and estimates are free.

How long does the swap take? A border reset on an existing driveway is a focused job, often finished in a day or two once the materials are on site. If the work ties into a larger paver driveway, it runs with that project schedule. We give you the timeline in writing before we start.

How do you source the part? We measure your paving and order the correct trim and hardscape materials to match, from professional-grade brands like Belgard, Unilock, and Techo-Bloc. We do not keep parts in stock. Every piece is ordered to your project, which is why the measurement step is not optional.

If your Schluter paver trim or driveway edge is failing, or you are planning a paver driveway in Enterprise, the fastest way to get a real number is a call. Mason Remodeling Enterprise installs driveway, paver, and hardscape details across Enterprise and nearby areas. We work with premium surfaces from Cambria, Silestone, and cabinetry from KraftMaid alongside our hardscape projects. Call (844) 797-6157 to schedule your free estimate. You will get a written price before any work begins, a verified technician with a name and photo before arrival, and the 365-Day Done Right Promise standing behind the job.

Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A single-story rear room addition with tall windows and a new patioA second-story addition that matches the existing rooflineA small remodeled galley kitchen with cabinets to the ceilingA finished basement family room with a media wall and wet barA walk-in pantry with wood shelvingA remodeled laundry and mudroom with a bench, cubbies and painted cabinets

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Enterprise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Enterprise team

A local vetted partner works across Enterprise and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-6157
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Mason Remodeling Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch