







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Home Additions & ADU: The Enterprise Owner’s Guide
We build and finish Sterling-compatible home additions and ADUs in Enterprise, and the installed cost runs $45,000 to $130,000 for a home addition and $90,000 to $220,000 for a full ADU, depending on square footage, foundation type, and how much of the existing home gets tied in. Those are real Enterprise numbers, not national averages – Clark County permitting, Nevada energy code, and the soil conditions in this part of the valley all move the figure. If you’re reading this because an addition is half-built, out of square, or a Sterling panel or component has failed on an existing structure, that’s the more common reason owners land here. We also finish and repair work that stalled partway through.

Key Takeaways
- A finished home addition in Enterprise runs $45,000 to $130,000; a detached or attached ADU runs $90,000 to $220,000.
- Mason Remodeling Enterprise is an independent service provider – we are not affiliated with Sterling, and we source Sterling-compatible components and materials where the spec calls for them.
- Clark County permits and inspections are part of every structural project we quote, listed as a line item.
- A written price arrives before any work starts, and a 365-Day Done Right Promise covers the finished job for a full year from completion.
Which Sterling Models This Applies To

Sterling’s residential construction line shows up in Enterprise on panelized additions, modular ADU shells, and sunroom-to-living-space conversions, and the component that fails most often depends on which series you own. Panelized wall and roof systems typically carry a data plate on the interior face of the first panel or inside the electrical chase, stamped with the model and series code. That plate is what a supplier needs – a photo of it saves a week of guesswork, because Sterling changed panel dimensions and fastener spacing between production runs, and a panel from the wrong run won’t line up with the spline grooves on yours.
Where a component is discontinued, the honest answer is that a true OEM match may not exist and a quality aftermarket equivalent is the right call – matching the load rating and the panel profile rather than the label. Older shells commonly used a thicker closed-cell foam core than current stock, so we measure core thickness and panel skin gauge with a caliper before ordering. KraftMaid, Cambria, and Silestone come into play on the interior finish side when an addition ties into existing cabinetry or countertops. Measure twice here: in Enterprise, ADU exterior walls on many Sterling systems are built to a nominal 6-inch depth, and a 4-inch panel won’t close the gap.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Home Additions & ADU Is Failing
- Hairline cracks running along panel seams. That’s usually differential movement between the panel and the framing, often from a footing that shifted during a wet season. Cosmetic until it isn’t – once the crack opens past a credit card’s thickness, water gets in.
- Water staining at the ceiling panel joints. Nevada monsoon rain drives sideways into roof panel splines that were flashed loosely at install. A stain on the interior panel face means the flashing has already failed.
- A soft or springy floor near the addition threshold. This points to subfloor moisture or a compromised joist hanger at the tie-in point. Enterprise soil settles unevenly, and the joint where new meets old takes the stress first.
- Doors and windows that stick seasonally. Panel systems flex with temperature swings; if the frames bind only in summer, the shell is moving more than it should. That’s a structural sign, not a hardware one.
- Visible gaps or daylight at the exterior panel edge. This is a failed seal, and it lets in both water and the desert heat that drives your cooling bill up. Left alone, the foam core absorbs moisture and loses R-value.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Enterprise, real installed ranges are $45,000 to $130,000 for a home addition and $90,000 to $220,000 for an ADU build. What drives the range: square footage, whether the foundation is slab or stem wall, how much existing wall gets opened up, and whether you need a full mechanical upgrade to meet current Nevada code. Permit fees and Clark County inspection costs appear as line items, never buried.
Parts plus labor stay transparent. If we’re replacing a failed panel or repairing a stalled addition rather than building from scratch, that’s quoted separately with the part cost and the labor cost shown side by side. Every finished project carries a written guarantee with its coverage terms stated plainly and runs 365 days from the completion date, and if a repair or installation fails, we make a free return visit at no charge.
| Project | Installed Range (Enterprise) |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
DIY or Call Us?
Here’s the honest split. You can safely photograph the data plate, measure panel thickness, check for daylight at seams, and note where cracks open – that’s information we need and it costs you nothing. What we’d steer you away from is opening a wall to inspect framing or trying to re-flash a roof panel joint yourself. Structural work on an addition is not a weekend project, and a bad repair on a load-bearing panel can compromise the whole shell. One honest note on safety: if you see sagging or a crack widening quickly, keep people out of that space and call a professional.
The 365-Day Done Right Promise means if our repair fails within a year, we return free. Give us a call at (844) 797-6157 and we’ll get a written price to you before any work starts. We answer live, around the clock.
FAQs

A properly built panel addition in this climate should hold 40-plus years before structural attention is needed, though exterior seals and flashings typically need service every 8 to 12 years because of the desert sun and monsoon season. Enterprise’s dry heat and sudden storms wear sealants faster than most of the country. Call (844) 797-6157 for a free assessment of yours.
Often yes – a seam crack, a seal, or a flashed joint can be repaired rather than rebuilt, which usually costs far less than a full replacement. Structural panel failure is the case where replacement wins. We’ll tell you which side of that line you’re on after looking. Call (844) 797-6157 to schedule the look.
Most targeted repairs finish in one to three days, while a full addition or ADU build runs weeks to months depending on permits and scope. Clark County review and inspections add time, and we build that into the schedule upfront. Call (844) 797-6157 for a written timeline and price.
We identify the model from your data plate, then source from Sterling’s current catalog or a load-rated aftermarket equivalent where the OEM part is discontinued, with compatibility confirmed before ordering. You’ll see the sourcing decision in the written quote. For a free estimate in Enterprise, (844) 797-6157.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












