A Mason company - serving Enterprise, NV
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Grohe · Enterprise

Grohe Kitchen Remodeling in Enterprise, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Enterprise
A walk-in pantry with wood shelving
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
A garage converted into a guest room and home office
A remodeled hall bathroom with patterned floor tile and painted walls
A remodeled staircase with wood treads and a slim metal railing
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Grohe Kitchen Remodeling: The Enterprise Owner’s Guide

If you live in Enterprise and you’re planning a kitchen remodel around Grohe fixtures, the all-in kitchen remodel typically runs $14,000 – $45,000, and a fixture-focused refresh (faucet, sink, filtration, and the parts that keep them working) lands well below that. We’re an independent service provider, not affiliated with Grohe, and we source the correct OEM or quality aftermarket part to match your exact model before any work begins. Every project gets a written price before a tool comes out of the case.

Contractor using a level to install a door frame during remodeling in Enterprise, NV

Call (844) 797-6157

Most Enterprise homeowners don’t find this part on purpose. They find it after a Grohe kitchen faucet starts dripping at the base, the pull-down sprayer loses pressure, or the cartridge behind the handle gets stiff and stops returning. In Summerlin and the southwest valley, hard water leaves mineral scale inside cartridges faster than the part was designed for, so what reads as “the faucet is dying” is often one worn component. The trick is identifying which Grohe series you actually have before you buy anything.

Which Grohe Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Grohe kitchen fixtures fall into a handful of families, and the part you need depends entirely on which one you own. The most common in Enterprise homes are the Eurosmart and Concetto single-lever faucets, the Essence line, and the pull-down K7 and Minta models. Each uses a different cartridge body, so a Eurosmart ceramic cartridge will not seat in a Concetto handle. That mismatch is the single most common ordering mistake we correct.

To identify your model, look on the base ring, the underside of the faucet body, or inside the cabinet where the supply lines connect. Grohe stamps a model number there, usually a six-digit code starting with 3, plus a series name. If the stamp has worn off, a photo of the whole faucet and one of the handle assembly usually lets us match it. Measure the cartridge diameter too: Grohe’s kitchen cartridges run in distinct body sizes, and a caliper reading settles it faster than guessing from a product photo.

On the OEM-versus-aftermarket decision, Grohe factory parts are the safe default because the tolerances are exact and the ceramic discs are rated for the full service life. Quality aftermarket equivalents exist for common cartridges and sprayer heads, and they can save real money, but the cheap knockoffs sold online often use softer ceramic that scales up in Nevada water within a year or two. We tell Enterprise owners plainly which parts we’d go OEM on and which aftermarket version we trust.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Grohe Kitchen Remodeling Is Failing

Here’s what a failing Grohe kitchen component actually looks like, and what’s behind each symptom:

  • A steady drip from the spout when the handle is off. The ceramic cartridge discs have worn or mineral-fouled and no longer seal flat. In Enterprise’s hard water, this is the first thing to go.
  • The handle feels stiff or won’t spring back to center. Scale has built up inside the cartridge body, or the cartridge’s internal lubricant has dried out. Stiffness usually precedes the drip by a few months.
  • The pull-down sprayer dribbles or loses pressure. The spray head’s internal check valve or the diverter has failed, so water splits between spout and sprayer instead of switching cleanly. A clogged aerator screen causes a similar symptom and is worth ruling out first.
  • Water seeps from under the faucet base onto the counter. The base O-ring or the mounting gasket has aged and hardened. Left alone, this one reaches the cabinet floor and can soften the deck.
  • The supply connection weeps at the shutoff valve. The integrated supply hose or its fitting has cracked or the washer has flattened. This is the symptom most likely to cause hidden water damage inside the cabinet.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Replacing a Grohe kitchen faucet, cartridge, or sprayer assembly as part of a kitchen project here runs inside our standard kitchen remodel range of $14,000 – $45,000 for a full remodel, or as a focused fixture and parts job well below that. A small kitchen remodel that bundles fixture replacement lands in the $9,000 – $20,000 band. Countertop and cabinet work, if you’re updating around the fixture, follows our counters at $2,000 – $6,500 and cabinet installation at $4,000 – $13,000.

Contractor using a level to install a door frame during remodeling in Enterprise, NV

What drives the number is the part itself (OEM versus aftermarket), whether the deck or counter needs any repair from a leak, and whether the job is a straight swap or part of a larger remodel. We put the part cost and the labor as separate line items on the written price, so you see exactly what the Grohe component costs and what we charge to install it. Every install is covered by our 365-Day Done Right Promise: if the work isn’t right within 365 days of completion, we make it right at no cost to you.

DIY or Call Us?

You can safely do a few things yourself: shut off the supply valves under the sink, remove and clean the aerator screen, and photograph the model stamp so you order the right part. Those steps cost nothing and often solve a pressure complaint outright.

Where DIY goes wrong on a Grohe cartridge is the extraction. The retaining nut sits deep, the cartridge can be seized by scale, and prying at it the wrong way cracks the faucet body or gouges the valve seat, turning a $30 part into a full faucet replacement. Supply-line fittings are also easy to cross-thread, and a slow leak you can’t see is the one that ruins a cabinet floor. If the handle won’t come free or the base is weeping, that’s the point to stop. Call (844) 797-6157 for a free estimate and we’ll identify the part and quote the install in writing.

FAQs

A whole-home remodel with the living, dining and kitchen areas opened up

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled primary bathroom with a soaking tub and walk-in showerA remodeled living room with built-in shelves around the fireplaceA single-story rear room addition with tall windows and a new patioA freestanding soaking tub in a remodeled primary bathroomA walk-in shower with large-format tile and a built-in nicheA remodeled family room with new windows and a window seat

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Enterprise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Enterprise team

A local vetted partner works across Enterprise and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-6157
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Mason Remodeling Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch