A Mason company - serving Enterprise, NV
A new rear addition with a vaulted beamed ceiling and tall windows
GAF · Enterprise

GAF Home Additions & ADU in Enterprise, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Enterprise
A wide opening with a new beam where the kitchen wall was removed
A garage converted into a guest room and home office
A low-threshold walk-in shower with a bench and grab bar
A finished basement family room with a media wall and wet bar
A walk-in pantry with wood shelving
A powder room with botanical wallpaper and a stone sink
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

GAF Home Additions & ADU: The Enterprise Owner’s Guide

We build GAF-spec additions and ADUs in Enterprise, and installed pricing runs $45,000 – $130,000 for additions and $90,000 – $220,000 for a full ADU. If your GAF product (roofing, decking, or below-grade waterproofing) has failed at the roof-to-wall junction where an addition ties in, or you’re planning a new tie-in and need the right GAF flashing kit matched to your existing assembly, we can identify the correct part, a written price, and a schedule that respects the inspection calendar. That’s the scope this page covers: failed GAF tie-in parts on Enterprise additions and ADUs, how to match the right replacement, and what it costs.

professional general contractor service in Enterprise, NV

Call (844) 797-6157

Which GAF Models This Applies To

A finished backyard cottage with a small covered porch

GAF doesn’t make “addition parts” as a single catalog line. The GAF components that matter on an Enterprise addition are the roofing and waterproofing materials where the new structure meets the existing roof: GAF’s WeatherWatch and StormGuard underlayments, Pro-Start and Seal-A-Ridge accessories, VentSure ridge and intake ventilation, and the Master Flow line for attic venting. For flat or low-slope ADU roofs, the Liberty and Ruberoid low-slope systems are what we’d typical-spec.

The compatibility gotcha most Enterprise homeowners hit: GAF’s shingle warranties and ventilation specs are tied to a complete system, so a correct-spec Timberline shingle paired with the wrong underlayment or an undersized ridge vent can void the manufacturer’s warranty on the whole slope, even though the shingle itself is fine. Identify your existing parts by the wrapper label (GAF part number, lot code), the shingle profile if visible (Timberline HDZ, UHDZ, AS, CS), and the measured exposure (usually 5 ⅝ inches for Timberline, 8 inches for GAF’s designer lines).

OEM vs. aftermarket: for GAF-branded accessories (ridge vents, starter strips, drip edge with GAF’s specified profiles), we recommend OEM because the warranty documentation requires it. For generic flashing and fasteners, a quality aftermarket equivalent from a licensed supplier is often indistinguishable on performance and saves 15 – 25%. We tell you which is which in the quote.

One note: Mason Remodeling Enterprise is an independent service provider and is not affiliated with GAF. We specify and install GAF-compatible materials; we don’t sell parts or carry inventory.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your GAF Home Additions & ADU Is Failing

  • Staining on the ceiling inside the addition. Water is tracking past the step flashing or the GAF underlayment splice at the roof-to-wall joint. In Enterprise, the failure usually appears after the second or third thermal cycle from our 40-to-100°F swing, not on the first rain.
  • Curling or lifting shingles along the tie-in line. The step flashing was nailed through (a common shortcut) rather than woven, or the shingle course was cut too tight against the wall with no expansion gap.
  • Moss or dark streaks concentrated on the addition slope. GAF’s StainGuard protection is on Timberline HDZ and UHDZ, but not on every line. If your slope is streaking, the installed product may not have carried algae resistance.
  • Attic condensation or a hot second-story room in summer. The GAF VentSure intake or ridge vent on the addition is undersized for the new square footage. An addition adds roof area; if ventilation wasn’t recalculated, the assembly runs hot and wet.
  • Granule loss on the new slope faster than on the old roof. Mis-matched shingle grades between the original roof and the addition. GAF’s entry line and its designer line differ in warranted granule life, and Enterprise’s summer UV accelerates the gap.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A room opened to the studs with new wiring and plumbing

For a failed GAF tie-in on an existing Enterprise addition, expect $1,800 – $6,500 to remove and reinstall the affected slope plus step flashing and underlayment; a full GAF-spec roof replacement on the addition runs $8,000 – $20,000. A new GAF-spec addition is $45,000 – $130,000, and an ADU is $90,000 – $220,000. What drives the range: square footage, roof pitch and slope access, whether HOA or city of Enterprise design review is in play, and whether the existing GAF system can be matched or must be replaced wholesale.

Every quote is a written price before any work starts, itemized by part and labor. GAF materials are specified by part number, not “or equivalent.” The work is covered by our 365-Day Done Right Promise, and if a repair or installation fails we come back at no charge.

DIY or Call Us?

You can safely check a few things: photograph the ceiling stain and note how it grows after rain; read the wrapper labels on your existing GAF underlayment or accessory stock if the original install left any; and measure the addition’s roof area so you can size the ventilation yourself. You can also verify your existing GAF warranty status through GAF’s own homeowner portal.

Where DIY goes wrong: peeling back shingles to inspect the tie-in, removing step flashing to re-seal, and anything on the roof slope. On a two-story addition, that’s fall territory, and on a low-slope ADU with a GAF Liberty or Ruberoid membrane, a botched lap won’t show up for months and then it’s a whole-slope replacement. We handle roof-level work with trained crews; we don’t hand it to homeowners.

Call (844) 797-6157 and we’ll schedule a free estimate. Every crew member who comes to your door is identity-verified, background-checked, and introduced to you by name and photo before the visit, and shows a photo ID badge on arrival. The Threshold Standard, not a generic policy.

FAQs

A framer checking new wall framing on a home addition

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled hall bathroom with patterned floor tile and painted wallsAn open living space after a whole-home remodelA remodeled primary bathroom with a soaking tub and walk-in showerA remodeled living room with built-in shelves around the fireplaceAn open kitchen and dining area after a remodelA freestanding soaking tub in a remodeled primary bathroom

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Enterprise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Enterprise team

A local vetted partner works across Enterprise and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-6157
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Mason Remodeling Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch