







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Windows & Doors: The Enterprise Owner’s Guide
We install IKO-compatible windows and doors across Enterprise, and typical installed pricing runs $4,500 – $15,000 for standard window replacement and $8,000 – $25,000 for impact-rated windows, with most single-unit swaps scheduled within a few business days of your estimate. This page is for Enterprise owners whose IKO window or door has already failed – fogged glass, a sash that won’t seal, a door that drags or leaks. Most people discover the problem the same way: a draft they feel before they see it, condensation trapped between panes, or water staining the drywall under a corner during a monsoon storm. Once you notice it, the part rarely improves on its own.

We’re an independent service provider. Mason Remodeling Enterprise is not affiliated with IKO, and we say that plainly so you know exactly who you’re calling.
Which IKO Models This Applies To

IKO builds windows and patio doors in vinyl and aluminum lines, and the part that matters most is the one printed on the glass spacer or etched into the corner of the sash. Before anything else, find that label. It usually gives a series code, a manufacturing date, and a unit size in inches – something like “35 1/2 x 59 1/2” on a double-hung. Those four numbers decide compatibility, not the brand name alone. IKO has revised frame extrusions and balance hardware across production runs, and a replacement sash sized for a 2012 series often won’t seat cleanly into a 2018 frame of the same nominal width.
For Enterprise owners, the OEM-versus-aftermarket decision comes down to two questions. If the unit is under the manufacturer’s limited warranty, an OEM sash or glazing pack keeps that coverage intact – aftermarket parts can void it. If the window is older and out of warranty, a quality aftermarket sash or glass pack from a local fabricator usually costs 20 to 30 percent less and performs the same, provided the measurements and glazing spec match. We measure, verify the series code, and tell you which route makes sense before you spend anything. Call (844) 797-6157 to schedule a free measurement and estimate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Windows & Doors Is Failing
In Enterprise, the desert climate stresses windows and doors in ways coastal product literature doesn’t anticipate. Here’s what we see, and what’s usually behind it:
- Fog or condensation between the panes. That’s a failed seal in the insulated glass unit, not a cleaning problem. Once moisture is trapped inside, the desiccant has given out and the glass pack needs replacement – the frame itself is often fine.
- Drafts or whistling along the edges. Worn weatherstripping or a shrunken gasket. In Enterprise, summer heat and dry air bake seals until they crack and pull away, and the gap shows up as a draft long before you see daylight through it.
- A sash that won’t stay up, or drags when you open it. Failed balance springs on a double-hung, or a warped sash on a slider. This is the most common hardware failure we replace, and it usually means the balance assembly, not the whole window.
- A door that sticks, scrapes, or won’t latch. A hinge that’s pulled loose from the jamb, a swelling slab, or a threshold that’s shifted. Left alone, the misalignment forces the weather seal open and lets dust and heat in.
- Water stains or soft drywall under a corner. A failed perimeter seal or a leaking sill pan. This one gets worse quietly and can rot the framing behind the wall, so it’s worth a look even if the window still opens and closes fine.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing in Enterprise depends on unit type, size, and whether you’re replacing the glass pack, the sash, or the whole unit. Here’s what Enterprise owners typically see:
| Scope | Typical Installed Range in Enterprise |
|---|---|
| Standard window replacement (per unit) | $4,500 – $15,000 |
| Impact-rated window installation (per unit) | $8,000 – $25,000 |
| Glass pack or sash swap (single unit) | Quoted at measurement; runs lower than a full replacement |
Every quote is a written line-item price delivered before any work starts – parts, labor, disposal, and any needed framing or seal repair shown separately, so nothing grows on the final bill. The work carries the 365-Day Done Right Promise: if it fails within a year of completion, we return and make it right at no cost to you.
DIY or Call Us?
There’s a safe line here, and we’d rather you know where it sits. You can safely clean the tracks, check the label for your series code, note where a draft or stain appears, and tighten a loose hinge screw that hasn’t pulled out of the wood. That’s it.
What goes wrong with DIY: replacing a sealed glass pack or a balance assembly requires the sash off the frame, correct measurements to the half-inch, and the right glazing spec for our sun load – get it wrong and you’ve paid twice. Worse, windows on upper floors put you on a ladder working with heavy glass, and that’s genuinely dangerous. On a door, resealing a leaking sill pan means pulling the unit and addressing the framing, which is a real repair, not a caulk job. For anything beyond tightening a screw, call us at (844) 797-6157. We’ll tell you honestly whether it’s a part swap or a full replacement.
FAQs

How long do IKO windows and doors last in Enterprise? Expect 20 to 25 years for the frame and glass pack in most homes, though our summer heat and UV exposure can shorten that – balance hardware and weather seals often need attention at the 10 to 15 year mark. Call (844) 797-6157 for a free assessment of your specific units.
Can a failing IKO window be repaired instead of replaced? Usually yes. A fogged window is almost always a failed glass pack or seal, not a failed frame, and that can be swapped without pulling the whole unit. Call (844) 797-6157 – we’ll tell you honestly which repair fits your window.
How long does a swap take? A single glass pack or sash replacement is typically a few hours. A full window replacement is generally a day per unit, and a multi-window job is scheduled over several days so your home stays livable throughout. Estimates are free.
How do you source the IKO part? We verify your series code and measurements, then source the correct OEM glass pack or sash, or a matched aftermarket equivalent, from a fabricator whose glazing spec meets local sun-load needs. You’ll see the part and its cost in writing before we order.
We also work with KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler, Moen, Toto, and Grohe fixtures for homeowners planning a wider project.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












