







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Roofing: The Enterprise Owner’s Guide
Tamko roofing shingles can be repaired or replaced on a failing section for roughly $400 – $1,800 in Enterprise, and a full Tamko-compatible roof replacement runs $8,000 – $20,000 depending on pitch, square footage, and whether the old layers come off. We install and repair Tamko roofing products throughout Enterprise, and we start every job with a written price before any work begins. Owners usually find the problem the same way: a stain spreading across a ceiling after a wind event, grit collecting in the gutter downspouts, or a shingle lifted at a valley after a summer monsoon.

What you’re looking at is not a mystery. A Tamko roof in Enterprise takes a specific beating, and the failure tells you where the water is getting in.
Key Takeaways
- Tamko repair in Enterprise: $400 – $1,800. Full Tamko-compatible replacement: $8,000 – $20,000.
- Matching the shingle line matters more than matching the color. Different Tamko lines have different profiles and exposure heights.
- Desert heat and monsoon wind drive most failures here, not age alone.
- We are an independent installer, not affiliated with Tamko.
Which Tamko Models This Applies To

Tamko makes several lines you’ll run into on Enterprise homes. Heritage is the one most owners have, a laminated architectural shingle in a 30-year and 50-year version; Heritage Premium and Heritage Vintage are heavier, with deeper shadow lines. Titan XT is the impact-rated line, and it’s the one to know about in a hail-prone corner of Clark County. MetalWorks is Tamko’s stamped steel and aluminum shingle, and it’s a different animal from asphalt entirely: it’s reused by removal and re-laying panels rather than patched like a shingle. Lamarite is the composite slate and shake product, and it costs considerably more to repair because the pieces interlock differently.
To identify what’s on your roof, look at the wrapper in the attic (builders often leave it) or read the exposure height on an intact shingle at the ridge. Measure from the bottom edge to the next shingle’s top edge; architectural Tamko shingles are typically right around 5-5/8 inches of exposure. A shingle that’s roughly 12 inches wide and 36 inches long across the field is almost certainly Heritage-family. If the surface has a rough, granular texture and a staggered look, that’s the standard architectural profile. If it’s a smooth metal panel with a stamped wood-grain pattern, step back and confirm it’s MetalWorks before ordering anything.
The OEM-versus-aftermarket call is real. Tamko’s own replacement shingles are the safest match for color and profile, especially if you’re patching a single slope. But aftermarket equivalents from other manufacturers can work fine on a repair, provided the exposure height and thickness are close. Where it goes wrong is on a 15-year-old Heritage roof: a new shingle of the same nominal color won’t match the sun-faded original. On a repair, we try to pull matching shingles from a slope that’s less visible, or accept a slight fade difference and be honest with you about it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Roofing Is Failing
Each of these symptoms points to a specific cause, and knowing the cause changes the price of the fix.
- Granules in the gutter and downspout. The protective mineral surface is eroding. Once a shingle has lost its granules, the asphalt underneath dries and cracks much faster in the Nevada sun.
- Curled or lifted shingle edges. Usually heat and thermal cycling, or a nailed-through shingle that’s worked loose. In Enterprise, a lifted edge after a monsoon gust is one of the most common calls we take.
- Dark or rust-colored ceiling stains. Water is reaching the deck or attic. The stain is a symptom; the failure is wherever the water got through.
- Missing or displaced shingles after a wind event. Wind damage is often localized to one slope or one valley, and repair is usually far cheaper than you’d fear if the deck is intact.
- Cracked or brittle shingles that snap when lifted. The asphalt has lost its flexibility. On a 20-year Tamko roof in Enterprise, this usually means repair becomes a stopgap rather than a fix.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Enterprise, here’s how it breaks down before we touch the roof.
- Tamko repair (patch or localized replacement): $400 – $1,800
- Full Tamko-compatible roof replacement: $8,000 – $20,000
- Tile roof repair (if the home has a tile field alongside): $600 – $2,500
- Metal roof installation (MetalWorks replacement): $15,000 – $40,000
The range is driven by square footage, roof pitch, number of valleys and penetrations, and whether the existing layers have to come off. A single-story ranch in Enterprise with a simple gable is at the low end; a two-story with dormers and a complex valley is at the high end. That written price covers the material, the tear-off, the underlayment, and the labor, itemized line by line, and there are no change orders unless you add scope. We provide it before we start, not after.
DIY or Call Us?
What you can do safely: inspect from the ground with binoculars, look for lifted shingles and missing pieces, and check the attic for dark decking or daylight. Turn off the main and don’t climb if the roof is wet.
What goes wrong is the climb and the roof pitch. This is genuinely dangerous work; a fall from a single-story roof in Enterprise can be a serious injury, and stepping onto a steep or old roof with brittle Tamko shingles can turn a $600 repair into a $6,000 one when the shingle breaks underfoot. We don’t think this is a job for a homeowner on a ladder. Call us and we’ll inspect it safely. Every crew member who comes to the door is background-checked, and you’ll know the technician’s name and photo before the visit. Call (844) 797-6157 for a free estimate.
FAQs

How long does Tamko roofing last in Enterprise? A Tamko architectural shingle typically lasts 15 – 25 years in the Nevada climate, shorter on a south-facing slope where UV exposure is highest. Repairs can extend that window, but a roof with widespread granule loss is on borrowed time.
Can it be repaired instead of replaced? Yes, if the damage is localized and the decking is sound. A $400 – $1,800 repair often makes sense for one slope or a wind-lifted section. If more than about a third of the roof is compromised, replacement is usually the better value, and we’ll show you why in writing. Call (844) 797-6157 to schedule a free estimate.
How long does the swap take? A repair is typically done in a few hours. A full Tamko-compatible replacement on a typical Enterprise home usually takes one to three days depending on size and weather. We’ll give you the schedule in the written price before the first day.
How do you source the part? We source Tamko-compatible shingles through our professional material partnerships, including GAF, CertainTeed, and Owens Corning lines, so the repair matches your roof profile and color as closely as possible. We don’t keep shingles on a truck; the material is ordered for your job and delivered. Call (844) 797-6157 for a free estimate, and we’ll help you match what’s actually on the roof.
We also handle selections from KraftMaid, Cambria, and Silestone for interior projects if you’re planning a kitchen or bath alongside the roof work.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












