







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Windows & Doors: The Enterprise Owner’s Guide
We install Tamko-compatible windows and doors throughout Enterprise, and a full replacement typically runs $4,500 – $15,000, with impact-rated installation running $8,000 – $25,000. Most Enterprise homeowners discover a failure the same way: a window that won’t latch in July, fog between the panes they can’t wipe away, or a door that drags on the sill after a windy spring. Those are the three most common starting points, and each points to a different part.

This guide is written for the owner who already knows something is wrong and wants to know which component failed, whether it can be repaired, and what a fair installed price looks like before anyone shows up at the door.
Which Tamko Models This Applies To

Tamko’s window and door lines sold into Southern Nevada run across several series, and the parts are not interchangeable between them. Before we quote anything, we identify the exact product line from the manufacturer’s label, which is usually affixed to the top or side of the window frame behind the interior trim, or on the door slab edge and the jamb. The label carries the series designation and the unit dimensions. When the label is gone, we measure the rough opening and the visible glass area and match those numbers against the series spec rather than guessing from the appearance of the unit.
The OEM-versus-aftermarket decision matters more here than with many brands. Tamko’s original hardware, weatherstrip profiles, and glazing components are matched to specific frame extrusions, so an aftermarket balance or sill piece that fits a competitor’s unit may seat loosely in a Tamko frame and leak air within a season. For visible parts like handles, hinges, and sill plates, a quality aftermarket equivalent is often a sound choice. For anything that carries the seal, we lean OEM. Enterprise sits in a high-wind, low-humidity climate, and those two conditions punish any gap in the envelope.
We also service KraftMaid, Cambria, and Silestone products for homeowners working through a larger remodel, though the window and door work on this page is Tamko-specific.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Windows & Doors Is Failing
Windows and doors fail slowly, and the early signals are easy to write off. Here are the five we see most often in Enterprise.
- Fog or condensation between the panes. The insulated glass seal has failed and moisture has entered the air space. Once that happens the glass unit is done; no cleaning will fix it, and the fix is a replacement glazing unit or sash.
- A window that won’t latch or stay closed. Usually a worn or broken balance, or a frame that has shifted as the house settled. A balance replacement is straightforward; a shifted frame needs the opening checked before new hardware goes in.
- Daylight or drafts around the door perimeter. The weatherstrip has compressed or the sill has degraded. In Enterprise this shows up fast because wind pushes desert dust through any gap, and you’ll see a silt line along the threshold.
- The door drags or rubs the frame. Often a sagging hinge or a sill that has absorbed moisture and swelled. Left alone, a dragging door grinds the finish off the slab edge and can crack the frame.
- Water staining on interior trim or drywall near a window. This usually means the exterior sealant and flashing at the frame have given out. It’s the most serious of the five because the damage behind the wall is always worse than what you can see.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed window replacement in Enterprise runs $4,500 – $15,000 for a typical whole-home or multi-window scope, and impact-rated window installation runs $8,000 – $25,000. A single glazing unit or sash swap sits at the low end; full-frame replacement across several openings sits at the high end.
What drives the range: the number of openings, whether we’re replacing the glass unit and sash into an existing frame or pulling the whole frame, the series and finish you choose, and whether the opening needs any repair to the rough framing. The price we give you is written before any work starts, itemized by opening, and it does not move once work begins. Every installation is covered by a written guarantee for 365 days from the completion date, and if anything we installed fails in that window, we come back at no charge.

DIY or Call Us?
There’s a real split here, and it’s worth being honest about which side you’re on. You can safely check a few things yourself: run your hand around the frame on a windy day to feel for drafts, look for a silt line along the door threshold, check that the manufacturer’s label is legible, and clean and re-seat a loose handle or tighten a hinge screw. Photograph the label and the failed area; those two photos let us identify the part before we arrive.
Where DIY goes wrong: replacing a glazing unit requires the correct seal and setting blocks, and a glass unit that’s installed slightly off will fog again within a season. Replacing a door sill or adjusting a frame that’s shifted means working with a heavy, spring-loaded assembly, and an improperly seated unit can fall. And if you see water staining inside the wall, stop; the fix is behind the drywall and isn’t a weekend job.
Mason Remodeling Enterprise is an independent service provider and is not affiliated with Tamko. Call (844) 797-6157 to schedule a free estimate. Our technicians have up to 22 years of experience.
FAQs

Most Tamko windows last 20 to 25 years, and doors typically last 15 to 20, but Enterprise’s combination of intense UV and blowing dust shortens the life of seals and weatherstrip well before the frame itself fails. The glass seal and the perimeter weatherstrip are usually the first to go, often in year 10 to 15. Call (844) 797-6157 for a free assessment of where yours stand.
Often yes. A fogged glazing unit, a broken balance, or worn weatherstrip can usually be repaired without replacing the whole window, and a dragging door is often fixed with hinge and sill work. Full-frame replacement is the answer when the frame itself is damaged or the wall around it has taken on water. We’ll tell you which one you’re looking at before you spend anything; call (844) 797-6157 for a free estimate.
A single glazing unit or balance replacement is typically a short visit, while a full window or door replacement takes longer per opening and a multi-window scope can run a full day or more. We confirm the time window when we book, give you the technician’s name and photo before the visit, and the technician shows a photo ID badge at the door. Call (844) 797-6157 to get on the schedule.
We match the part to your unit’s series and dimensions, which we confirm from the manufacturer’s label or from measuring the rough opening and visible glass area when the label is missing. We use OEM parts for anything that carries the seal and a quality aftermarket equivalent only where the fit is proven. Call (844) 797-6157 for a free estimate.
When you’re ready to stop guessing which part failed, call Mason Remodeling Enterprise at (844) 797-6157 to schedule your free estimate. You’ll get a written, itemized price before any work starts, a technician introduced to you by name and photo before the visit, and a 365-Day Done Right Promise on the work. A live person answers every call, and we’re here every day of the year.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












