







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Driveway & Pavers: The Enterprise Owner’s Guide
Tamko-compatible paver driveways in Enterprise typically run $7,000 – $18,000 installed, and repairs to individual pavers or the base beneath them start far lower. We install and rebuild throughout the area, and we can usually get an estimator to your driveway within a few days of your call. Most Enterprise owners don’t discover a problem all at once. It starts with a paver that rocks when they walk on it, then a hairline crack that spiders out, then a section of the drive that sags toward the garage after summer heat and monsoon runoff do their work on a base that was never built for this soil.

Which Tamko Models This Applies To
Tamko’s paver and hardscape lines turn up in Enterprise on driveways and front walks installed by builders during the 2000s and 2010s, and they’re usually identifiable by the paver’s profile: standard 60mm or 80mm interlocking units, often in a running-bond or herringbone pattern with a chamfered edge. To match a replacement paver, measure the length, width, and thickness in millimeters, note the color name from a spare left in the garage or a scrap under the porch, and check the underside of a lifted unit for a stamp or dye lot. Dye lots shift year to year, so a paver pulled from a new batch can read as a shade lighter against a sun-faded drive. On the OEM versus aftermarket question, a comparable 60mm or 80mm interlocking pavers from a professional-grade hardscape line is often the smarter call in Enterprise, because they meet the same load spec and cost less per square foot than tracking down a discontinued Tamko color. We are an independent service provider and are not affiliated with Tamko; we match what’s on your drive to what’s available.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Driveway & Pavers Is Failing
Pavers rarely fail in the middle of the unit. They fail at the base and the joints, which is why the symptom you see is usually downstream of the real problem.
- Rutting or dips under the wheels. The compacted aggregate base has settled or wasn’t deep enough for our caliche-heavy soil, and a wheel path sinks where the subgrade gives way.
- Pavers rocking or lifting. The bedding sand has washed out or shifted, so individual units lose support and move underfoot.
- Cracks radiating from a corner or joint. Often a unit was installed too tight against the edge restraint, or a heavy vehicle drove over it before the base was fully settled.
- Joint sand washing out after rain. Enterprise monsoon bursts strip polymeric or plain joint sand faster than in a desert town without seasonal runoff, leaving gaps for weeds and water.
- Efflorescence or a chalky white haze. Mineral salts migrating to the surface, common in our hard water, and often a sign that water is pushing through the pavers rather than draining off them.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what homeowners in Enterprise are actually paying for paver work, installed, with labor and materials in one figure.
- Paver driveway installation (full): $7,000 – $18,000
- Driveway replacement: $5,000 – $14,000
- Concrete driveway installation (if you’re switching): $4,500 – $12,000
- Asphalt driveway paving (alternative): $3,500 – $9,000
- Driveway sealing: $250 – $700
- Paver patio installation (if the failing section runs to your patio): $3,500 – $11,000
The range is driven by square footage, whether the base needs full excavation or just the top layer rebuilt, the paver thickness (60mm for foot traffic, 80mm or more for vehicle loads), and whether edge restraints need replacing. You get a written price before any work starts, so the number on the estimate is the number on the invoice. Every install and rebuild carries our 365-Day Done Right Promise: if something we installed fails within 365 days of the completion date, we come back and make it right at no cost to you.
DIY or Call Us?
There’s honest DIY territory here. You can pressure-wash to see the real color, sweep a handful of joint sand into low spots, re-seat a single loose paver on fresh bedding sand, and reseal a small section on your own. What goes wrong is the base. Pulling pavers and re-laying them without addressing why the ground beneath settled just pushes the same failure down the road, and running a rented plate compactor over a base that isn’t deep enough won’t fix a rut. If you’re seeing dips wider than a few feet, movement along a whole section, or cracks that return after a repair, that’s base work and it needs a trained crew with the right compaction and drainage. Call us at (844) 797-6157 and we’ll walk the drive with you and give you a straight answer, including when a repair beats a full rebuild. The Threshold Standard also means the tech’s name and photo come to you before the visit, so you know who’s at your door.
FAQs

How long do Tamko pavers last in Enterprise? A properly installed 80mm paver drive lasts 25 to 50 years, but in our climate the base and joint sand determine the real lifespan: UV exposure fades color over time, and monsoon runoff erodes joints faster than in drier areas. Maintaining the joints is what keeps the pavers themselves intact.
Can my driveway be repaired instead of replaced? Yes, often. Lifting and re-seating a section on a corrected base, replacing broken units, and re-sanding joints can run a fraction of a full install. Call (844) 797-6157 for a free look, because the honest answer depends on whether the failure is surface or base.
How long does the work take? Small repairs are a day. A full paver driveway install or rebuild in Enterprise usually runs three to seven days, depending on square footage, base depth, and weather. You get a written timeline with your written price before work starts.
How do you source the part? We measure and match your existing paver’s profile, thickness, and color to professional-grade hardscape lines such as Belgard, Unilock, and Techo-Bloc, and we tell you upfront if a discontinued color means a close match rather than an exact one. Call (844) 797-6157 for a free estimate and a straight answer on sourcing.
We also handle matching work in other finishes, including KraftMaid cabinetry and Cambria and Silestone surfaces, when a driveway project turns into a larger remodel.
Ready to stop guessing whether that driveway needs a patch or a rebuild? Call Mason Remodeling Enterprise at (844) 797-6157 for a free estimate. A live person answers every call, around the clock, and you’ll get a written price before any work begins. Our technicians have up to 22 years of experience, and we’ll tell you honestly what the pavers need.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












