







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Driveway & Pavers: The Enterprise Owner’s Guide
We install and repair Boral-compatible driveway pavers and hardscape systems in Enterprise, and a full paver driveway typically runs $7,000 to $18,000 installed, with repairs and localized resets priced far lower. Boral’s concrete paver lines are made to a tighter dimensional tolerance than commodity pavers, so matching a replacement course means knowing your series before you order anything. Most Enterprise owners discover the problem the same way: a settled or heaved strip near the garage apron after a monsoon season, a paver that rocks underfoot, or sand washing out of the joints every time the irrigation runs.

Key Takeaways
- Installed paver driveway pricing in Enterprise: $7,000 – $18,000, depending on square footage, base depth, and pattern.
- Boral pavers are dimensionally matched per series. A paver from the wrong series will not sit flush, even if it looks identical.
- Our technicians have up to 22 years of experience with hardscape systems and the desert conditions that stress them.
- We’re an independent service provider and not affiliated with Boral. We source Boral-compatible product to match your existing field.
Which Boral Models This Applies To

Boral’s paver catalog splits into a few families that behave differently underfoot and in the carton. The old-style tumbled and cobble-look lines carry a wider face bevel and a rougher surface. The cleaner contemporary lines run tighter tolerances and thinner nominal joints. That difference is the compatibility gotcha most homeowners miss: two pavers can share the same face dimensions but have different thickness or chamfer, and mixing them in one field shows up as a visible lip within a season.
To identify what you have, pull one paver from an inconspicuous spot – the edge along the garage apron is usually easiest – and measure it in three places: face length, face width, and thickness. Write the numbers down before you call anyone. Thickness is the spec that matters most for base compatibility. Then look for a stamp or ink mark on the side or underside; Boral marks many of its lines, and a photo of that mark plus your three measurements gets you a correct match instead of a guess.
On the OEM-versus-aftermarket question, the honest answer is that a genuine Boral paver from the same series is the cleanest match when you can get it, and a quality aftermarket paver milled to the same thickness is a reasonable substitute for small repair areas where the color can be blended. For a full driveway in Enterprise, we typically recommend staying within one manufacturer’s series so the color and texture stay uniform across the field. Where Boral product is discontinued or on long lead, we’ll tell you plainly and lay out the closest match before you commit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Driveway & Pavers Is Failing
Enterprise sits in a climate that punishes hardscape in specific, predictable ways: intense summer heat, infrequent but violent monsoon rain, and soil that shifts when it dries. Here’s what failure looks like, and what’s actually causing it.
- Pavers rocking or flexing underfoot. The bedding sand has migrated or the base compacted unevenly. Rocking is the earliest signal, and left alone it grinds the paver edges until the corners chip.
- Sand washing out of the joints after storms. Joint sand is the layer that locks the field together. When it erodes, water gets under the pavers, and in Enterprise the monsoon season can strip a joint line in a single afternoon.
- Heaving or a raised hump in the field. Usually water trapped under the base or a root pushing up from below. A localized hump is a repair; a field-wide one points to a drainage problem that a new top course won’t fix.
- Efflorescence – the white chalky haze. Mineral salts rising to the surface. It’s cosmetic, but repeated blooms mean moisture is moving through the pavers, and that’s worth diagnosing.
- Cracked or chipped paver edges. Often from vehicle loads on an under-built base, or from a paver that was already compromised by rocking. Edge chipping at the driveway apron is the most common call we get in Enterprise.
One reality specific to this valley: a paver installed over a shallow base can look perfect for two or three summers and then fail quickly once the base gives. If your driveway is more than a few years old and rocking has started in more than one spot, the base is usually the story, not the paver.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what pavers and paver work run in Enterprise. These are installed ranges, parts and labor together, so you can self-qualify before you call.

| Work | Installed Range in Enterprise |
|---|---|
| Paver driveway installation (full) | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
What drives the range: total square footage, base depth and whether the old base has to come out, pattern complexity (a running bond lays faster than a herringbone), and how much cutting happens at the edges and around the apron. Parts-plus-labor transparency is standard for us – you get a written price before any work starts, with the paver line, base material, and labor broken out, so you can see exactly where the money goes. The work is covered by our 365-Day Done Right Promise, which means if something we installed fails within 365 days of the completion date, we make it right at no cost to you.
DIY or Call Us?
There’s a real split here, and it’s worth being honest about it. What you can safely do yourself: measure and identify your paver series, photograph the failed area, sweep joint sand back in after a storm, and clear debris from the drainage path. Those are all low-risk and genuinely useful. What goes wrong DIY is almost always the base. Re-lifting pavers to fix a settled spot means re-compacting the base and re-setting the bedding layer to the right depth – get that wrong and the same spot fails again within a season, usually worse. Cutting pavers for edge work needs a proper wet saw and dust control. And if a paver has heaved because water is pooling under the driveway, replacing the paver without fixing the drainage just moves the problem.
We’d rather you call and get a written price than spend a weekend on a repair that comes back. Call (844) 797-6157 for a free estimate – estimates are free, and a live person answers every call, day or night.
FAQs

A properly installed paver driveway in Enterprise should hold 25 to 30 years or more, but the paver isn’t the weak link – the base is. In this climate, a well-built base with correct drainage outlasts the pavers themselves. If the base was under-built, expect visible failure within 3 to 7 summers. Call (844) 797-6157 for an exact quote on a repair or replacement – estimates are free.
Often yes. Localized rocking, a few chipped edge pavers, or a single settled area can usually be lifted, re-based, and reset without touching the rest of the driveway, and that costs a fraction of a full install. Field-wide heaving or widespread joint loss usually points to a base or drainage failure that a spot repair won’t solve. Call (844) 797-6157 for a free estimate and we’ll tell you honestly which one you’re looking at.
A small reset of a few pavers is often a single-day job; a full driveway replacement in Enterprise typically runs several days to about a week depending on square footage, base work, and weather. We give you the schedule in writing before we start. Call (844) 797-6157 for a free estimate.
We match on three measurements – face length, face width, and thickness – plus the stamped series mark, because thickness is what keeps the new paver flush with your existing field. Where the exact Boral series is discontinued, we’ll show you the closest compatible match and explain the color and texture trade-off before you decide. We’re an independent service provider and not affiliated with Boral; we source Boral-compatible product for the job. Call (844) 797-6157 for a free estimate.
We also work with KraftMaid, Cambria, and Silestone on the interior side, and hardscape partners including Belgard, Unilock, and Techo-Bloc when Boral isn’t the right match for your project. Every job comes with a written price before work starts and a written guarantee with terms spelled out plainly – our technicians have up to 22 years of experience, and every crew member is background-checked and identity-verified per The Threshold Standard, with their name and photo sent to you before the visit. Call (844) 797-6157 for a free estimate on your Enterprise driveway and pavers.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












