







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Kitchen Remodeling: The Enterprise Owner’s Guide
PGT-compatible kitchen remodeling for an Enterprise home typically runs $14,000 to $45,000 installed, with smaller projects landing between $9,000 and $20,000. We don’t promise same-day work on a remodel – kitchens take time to do right – and every project starts with a written price before a single tool is unpacked. Homeowners in Enterprise usually reach out when the original builder-grade kitchen in their PGT-built home has hit its limit: cabinets that don’t close flush, laminate surfaces worn through, a layout that fights the way the family actually cooks. Because PGT homes in this region share door, drawer, and cabinet-box standards, replacement parts and new cabinetry can be matched to the existing footprint instead of forcing a full tear-out.

Key Takeaways
- Installed kitchen remodeling in Enterprise: $14,000 – $45,000; small kitchen remodel: $9,000 – $20,000.
- PGT is a window and door manufacturer – we install PGT-compatible cabinetry and surfaces matched to your home’s openings and standards, not PGT-branded parts.
- We’re an independent service provider, not affiliated with PGT.
- Written price before work starts, 365-Day Done Right Promise, background-checked technicians introduced by name and photo.
Which PGT Models This Applies To

First, the honest part: PGT manufactures windows and doors under the WinGuard, Architectural, and EnergyVue lines, so when an Enterprise homeowner searches for “PGT kitchen remodeling,” what they usually have is a PGT-built or PGT-window home with original cabinetry and surfaces due for replacement. The cabinet boxes, drawer slides, and door fronts in those homes follow standard North American sizing – 12, 15, 18, 21, 24, 27, 30, and 36-inch base widths, with wall cabinets at 12, 15, 18, and 24 inches deep – so matching a replacement is a measuring job, not a guess.
To identify what you need, pull one drawer and look for a manufacturer sticker on the inside of the cabinet box or the back of the door. If there’s no sticker, we measure the opening, the reveal (the gap between door and frame), and the hinge bore. Most hinges in these homes fall into a 35mm cup bore with either a 45mm or 52mm screw pattern, which tells us which replacement hinge family will line up without re-drilling.
On the OEM-versus-aftermarket question: PGT doesn’t sell cabinet parts, so what you’re really choosing is whether to match the original cabinetry line or swap to a spec-grade line like KraftMaid or Wellborn. Original matching is fine when only one or two doors are damaged, but once you’re replacing six or more, a new line usually costs less and performs better.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Kitchen Remodeling Is Failing
These are the symptoms Enterprise homeowners describe most often, and what’s actually happening underneath.
- Doors that won’t stay closed or sag at the hinge. The hinge cup has loosened in the particleboard or the spring has fatigued. In Southern Nevada’s dry indoor air, particleboard cabinets lose moisture and the screw holes wallow out faster than in humid climates.
- Laminate lifting or bubbling at the seams. Heat and low humidity in an Enterprise kitchen pull at the adhesive bond along the laminate seam. Once moisture gets under a lifted edge, the substrate swells and the surface can’t be glued back flat.
- Drawer slides that grind or stick halfway. The nylon rollers inside a builder-grade undermount slide wear flat after years of use. Grinding is the sound of metal running on metal.
- Countertop seams that have opened or caulking that’s pulling away. A seam gap wider than about 1/16 inch lets water into the substrate below, and that’s when countertop replacement moves from cosmetic to structural.
- Backsplash tile cracking or grout falling out in lines. Linear cracking usually means the cabinet boxes have shifted or the wall behind the tile flexed. Re-grouting over a moving substrate just delays the next crack.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what a kitchen remodel or targeted replacement runs in Enterprise, installed, with a written line-item price before work begins:
| Project | Installed Range |
|---|---|
| Full Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the range: cabinet line and door style, whether the layout stays put or moves plumbing, countertop material (Cambria, Silestone, and Caesarstone sit at different price points), and how much demo and wall repair the existing kitchen needs. Parts and labor are quoted separately so you can see the material cost against the install cost. Every job carries the 365-Day Done Right Promise – if the work isn’t right within a year of completion, we make it right at no cost.
DIY or Call Us?
You can safely check a few things yourself: pull a drawer to look for the cabinet sticker, measure the opening and hinge bore, and note whether doors sag left or right. Where DIY goes wrong is in countertop removal (undermount sinks and live plumbing lines), electrical work if the remodel touches outlets or under-cabinet lighting, and any cabinet run where the countertop is a solid surface going back on. Those jobs need a licensed pro, and we won’t walk you through wiring or cutting into a live wall over the phone. Our technicians have up to 22 years of experience and carry a photo ID badge, and you’ll get their name and photo before the visit. Call (844) 797-6157 to schedule a free estimate.
FAQs

Builder-grade cabinets in an Enterprise home typically hold up 15 to 20 years before hinges, slides, and laminate surfaces hit the end of their life. The dry climate helps wood avoid rot but speeds up laminate lifting and hinge-cup loosening, so expect hardware wear before structural failure.
Yes, if the failure is limited to hardware. Replacing hinges, drawer slides, and a few door fronts costs far less than refacing or a new kitchen and solves the sag-and-stick problem for years. Once the laminate is bubbled or the seam has opened, repair stops making sense and replacement is the cheaper path.
A targeted cabinet and countertop swap in an Enterprise home usually runs one to three weeks; a full kitchen remodel runs four to eight weeks depending on the scope. The written price and timeline are set before work starts, so there are no verbal estimates that grow on the final bill.
We source through specification-grade manufacturer partnerships – KraftMaid and Wellborn for cabinetry, Cambria, Silestone, and Caesarstone for surfaces, Kohler, Moen, Toto, and Grohe for fixtures – and match your existing opening by measurement when you want to keep the original footprint. We don’t stock parts locally or carry them on a truck, so timelines reflect manufacturer lead times, which we quote up front.
Call (844) 797-6157 for a free estimate on your Enterprise kitchen project. A live person answers every call, every day. Mason Remodeling Enterprise is an independent service provider and is not affiliated with PGT. Written price before any work starts. 365-Day Done Right Promise on every job.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












