







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Roofing: The Enterprise Owner’s Guide
Roofing work around PGT window and door assemblies in Enterprise typically runs $400 to $1,800 for a targeted repair and $8,000 to $20,000 for a full roof replacement, depending on the system and how much of the envelope is affected. Most Enterprise owners discover the problem the same way: a stain spreading on a ceiling, water tracking along a window head after a monsoon, or a flash of daylight where the PGT frame meets the sheathing. We evaluate the assembly, match the right parts, and put the price in writing before any work starts. Our technicians have up to 22 years of experience with this kind of interface detailing.

Which PGT Models This Applies To
PGT makes windows and doors, not roofing shingles, so “PGT roofing” on an Enterprise home almost always means the roofing interface around a PGT window, door, or patio slider: the head flashing, the sill pan, the jamb sealant joint, and the drip cap above the opening. Those parts are matched to the rough opening and to the wall assembly, not to a single PGT series. The compatibility gotcha is here: a PGT slider with a deep frame pocket needs a head flashing sized to that pocket, and a standard 2-inch drip cap won’t seat correctly. Before we quote anything, we pull the label from the glass corner or the jamb sticker, measure the rough opening, and photograph the existing flashing profile. On OEM versus aftermarket, PGT-specific trim and flashing kits exist, but for most Enterprise installations a specification-grade equivalent from a roofing manufacturer meets or exceeds the original when it’s matched to the actual opening.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Roofing Is Failing
Roofing at a window or door head fails in a predictable order. These are the signals we see most in Enterprise.
- Water staining on the ceiling near an opening. The head flashing is likely under-lapped or the sealant has cracked, letting water run behind the frame instead of over it.
- Daylight or a draft at the frame edge. The jamb sealant joint has separated, which lets both air and water in. That’s a sealant and flashing problem, not a window problem.
- Peeling paint or soft sheathing above a PGT door. Water has been wicking into the wall for a while. By the time paint lifts, the sheathing is often already compromised.
- Rusted fasteners or corroded flashing. Common after several seasons of desert heat and monsoon moisture. Corroded metal stops shedding water.
- Granule loss and curling shingles along the opening. The roof surface itself is aging out at the highest-stress point, where wind and water concentrate around the frame.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Enterprise, targeted roofing repair around a PGT opening runs $400 to $1,800. A full roof replacement runs $8,000 to $20,000, and a metal roof installation runs $15,000 to $40,000. Tile roof repair runs $600 to $2,500. What drives the range is how much of the envelope is involved, the pitch and access, whether sheathing needs replacement, and whether the flashing detail requires custom fabrication. We itemize parts and labor on the written quote, so you can see the flashing, sealant, and fasteners as separate lines from the labor. Every project carries a written guarantee with stated terms, including the 365-Day Done Right Promise: if the work isn’t right within 365 days of completion, we make it right at no cost to you.
DIY or Call Us?
You can safely check a few things yourself: look for ceiling stains after a storm, feel for drafts at the frame edge, and photograph any cracked sealant from the ground with a zoom lens. What you shouldn’t do is climb onto the roof to pry up flashing or re-seal a head detail. Roof work at height is the leading cause of serious injury for homeowners, and an incorrectly re-installed flashing pan will trap water and cause more damage than the original leak. Sealant applied over a wet substrate fails within a season in Enterprise heat. Call us at (844) 797-6157 and we’ll assess it safely and give you a written price.
FAQs

The roofing and flashing around a PGT opening typically lasts 10 to 20 years in Enterprise, shorter than the window itself because sealant and flashing take the full brunt of sun and monsoon. UV exposure here degrades standard sealants faster than in cooler climates, so we use UV-rated products and recommend an inspection after the first monsoon season.
Often yes. A single failed flashing detail or a cracked sealant joint is a $400 to $1,800 repair, not a full replacement. We only recommend replacement when the sheathing is compromised or the roof surface around the opening has reached the end of its life.
A targeted repair around one or two PGT openings is usually a half-day to a full day. A full roof replacement is typically two to four days depending on square footage, pitch, and weather. We give you the schedule in writing with the price.
We match the flashing and trim to your measured rough opening and the PGT model identified from the label, then source specification-grade components from established roofing manufacturers. For trim that must match the PGT frame profile, we order the correct profile rather than forcing a universal part to fit.
If your PGT opening is leaking or you’ve spotted a failing detail, call Mason Remodeling Enterprise at (844) 797-6157 for a free estimate. We’re an independent service provider, not affiliated with PGT, and we also service KraftMaid, Cambria, and Silestone products. A live person answers every call, and you’ll get a written price before any work begins.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












