







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Driveway & Pavers: The Enterprise Owner’s Guide
We supply and install PGT-compatible driveway and paver components across Enterprise, and a full paver driveway installation here runs $7,000 – $18,000 depending on square footage, base depth, and paver line. This is planned work, not emergency work, so we schedule it properly and put the price in writing before anything is torn out. Homeowners usually discover the problem the same way: a paver lifts after a monsoon season, sand joints wash out along the driveway apron, or a section of pavers settles and holds standing water that wasn’t there before.

What sets this apart from a generic paver page: PGT-branded systems use specific edge restraint profiles and joint-sand specifications that most subs swap for whatever is on the shelf, and in Enterprise that shortcut fails faster than anywhere. We match the actual profile, not a close-enough substitute.
Which PGT Models This Applies To

PGT paver systems show up in Enterprise on driveways, patios, and apron transitions, and the compatibility question is almost never the paver face itself – it’s the edge restraint, the joint sand, and the base aggregate. Older installations often used a poly-sand joint that was standard for the era but breaks down quickly in our heat-and-flash-flood cycles. If your driveway was installed before roughly 2015, the joint material almost certainly needs replacing before the pavers themselves do.
To identify what you have, check three things: the edge course for a stamped manufacturer mark on the restraint channel, the joint width (typically 2 – 4mm on most PGT systems), and a photo of the base layer if any course is pulled up. That last one matters most – Enterprise yards sit on caliche and decomposed granite in places, and base prep differences mean a paver that looks identical can behave completely differently under load.
The OEM-vs-aftermarket call is honest here: PGT-branded edge restraint and joint sand are worth matching exactly because the profile tolerances matter, but the paver face itself can often be matched from a compatible production line when the OEM colorway is discontinued. We source accordingly. Mason Remodeling Enterprise is an independent service provider and is not affiliated with PGT.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Driveway & Pavers Is Failing
These are the symptoms Enterprise homeowners call us about most, and each points to a different underlying cause:
- Paver edges lifting and rocking. The edge restraint has failed or was never anchored deep enough for our soil. Once one course lifts, water gets under the field and the whole apron starts moving within a season or two.
- Joint sand washing out after storms. Poly-sand that wasn’t installed to spec – or was installed during a cold snap rather than a dry 90°F stretch – never fully cures, and the first real rain event takes it out. Standard kiln-dried sand with a stabilizer holds better in our climate than a lot of retrofit poly products.
- Standing water on the driveway after rain. Either the base wasn’t compacted to spec or the slope is off by less than an inch across the run. In Enterprise, where a summer monsoon can drop an inch in twenty minutes, even a small low spot becomes a visible puddle that undermines the base over time.
- Visible gaps or cracks between pavers. Usually the base layer has shifted from root intrusion or insufficient aggregate depth. A patch job over a moving base looks fine for a month and then fails the same way.
- Weeds pushing up through joints. The joint sand layer is too shallow or the wrong product. This is the cheapest fix on the list if it’s caught before the base is compromised.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Paver driveway installation in Enterprise runs $7,000 – $18,000 for a full replacement. A targeted repair of one failing section typically falls well under that, and we quote it separately so you can decide. Driveway sealing, which extends the life of a sound installation, runs $250 – $700. Concrete driveway replacement, if you’re weighing a material switch, runs $4,500 – $12,000.
What moves the number: total square footage, whether the existing base can be saved or has to be excavated and re-compacted, how deep the edge restraint anchoring needs to go on your soil, and whether the paver line you want is a premium finish or a standard. Every quote is line-item and written before work starts. We don’t hand out verbal estimates that drift.
The installation warranty covers workmanship for a full 365 days from the completion date. If a paver lifts or a joint fails within that window through no fault of the homeowner, we come back and fix it at no cost.
DIY or Call Us?
An owner can safely handle a few things here. Raking back joint sand and re-filling a shallow joint with the correct stabilized sand is a weekend job with no real risk. Taking photos of a lifted section, checking slope with a level, and confirming whether water is pooling are all fine to do yourself and genuinely helpful before you call.
Where DIY goes wrong: re-setting a lifted paver without addressing the base underneath. It feels like the obvious fix, but if the base has shifted, the paver lifts again after the first storm – and now you’ve paid for the paver twice. Excavating and re-compacting a base to spec is not a homeowner job, and getting the edge restraint anchor depth wrong in Enterprise’s soil is where most DIY attempts fail.
Call Mason Remodeling Enterprise at (844) 797-6157 to schedule a free estimate. We’ll tell you honestly whether a repair or a replacement makes sense.
FAQs

Ten to twenty years depending on base prep and joint maintenance. In our heat, the pavers themselves hold up well; the joint sand and edge restraint are what fail first, usually within the first five to seven years if not maintained. Ask for the base to be compacted to spec and the edge anchored deep, and the pavers will outlast both.
Often yes. A single lifted section or a failing edge course can be reset and re-anchored without touching the rest of the driveway, as long as the base underneath is still sound. Call (844) 797-6157 and we’ll look at it before recommending replacement.
A targeted repair is usually a one-day job. A full driveway replacement typically takes three to five working days, including base excavation and compaction, depending on square footage. We don’t rush the base work, because that’s what determines whether the driveway lasts.
We match the specific PGT edge restraint and joint sand profiles your installation was built with, and source through material partnerships including Belgard, Unilock, and Techo-Bloc for the paver face where the OEM colorway is no longer available. We don’t claim to stock parts – every part is sourced to your specific driveway.
Call (844) 797-6157 to get your part matched and your free estimate scheduled.
We also install KraftMaid, Cambria, and Silestone products for homeowners who are doing a broader project alongside the driveway.
Every Mason Remodeling Enterprise crew member is background-checked and identity-verified under The Threshold Standard, and you’ll receive their name and photo before the visit, plus a photo ID badge at the door.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












