







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Kitchen Remodeling: The Enterprise Owner’s Guide
CGI-compatible kitchen remodeling in Enterprise runs $14,000 – $45,000 installed for a full kitchen, with cabinet installation alone at $4,000 – $13,000 and countertop work at $2,000 – $6,500. We verify the CGI specification on your existing cabinets and surfaces before quoting, so the replacement parts are matched to your model, not to whatever is closest on a shelf. Mason Remodeling Enterprise is an independent service provider and is not affiliated with CGI.

Most owners here discover a CGI failure the slow way. A cabinet door in a newer Enterprise build starts dragging within a year, or a laminate edge lifts near the sink because the humidity off the Spring Mountains swings hard between seasons. The drawer that used to glide now sticks halfway. You check the box label under the counter only after something has already gone wrong, which is why we start every kitchen project by photographing the labels, hardware stamps and door profile so the match is confirmed in writing before any part is ordered.
Which CGI Models This Applies To

CGI kitchen products span a wide range, from stock cabinet lines sold through big-box channels to semi-custom door-and-drawer programs with proprietary hinge and glide patterns. The part you need depends on which generation you have. A common compatibility gotcha: CGI cabinet boxes made for one hardware series often accept only that series’ hinge cup bore and screw pattern, so a “standard” replacement hinge from a hardware store can fit the door but never sit flush in the cup. Measure the bore diameter and screw spacing before you buy anything, or you’ll end up returning it twice.
To identify your model, look for the label inside the cabinet door or on the back panel of a base cabinet, and photograph the hardware stamps on hinges, drawer glides and shelf pins. That photo set is what we work from. On the OEM-versus-aftermarket question: genuine CGI replacement parts guarantee the original fit and finish, while quality aftermarket equivalents can save real money on hidden hardware like glides and shelf supports where finish doesn’t show. For visible surfaces, doors, drawer fronts, edge banding, we lean toward the OEM match so the kitchen stays consistent. Mason Remodeling Enterprise matches the specification first and lets the budget follow from that.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Kitchen Remodeling Is Failing
- Doors that drag or rub the frame. Usually a failed or worn hinge, or a box that has shifted as the cabinet settled. In Enterprise’s dry heat, wood and composite boxes expand and contract enough over a season to make a hinge that was fine in spring bind by summer.
- Drawers that stick or jump the track. A worn glide, a bent track, or debris packed into the runner. CGI full-extension glides are replaceable, but the mounting pattern has to match or the new glide won’t seat.
- Lifting or peeling edge banding. Heat and moisture near the sink and range break down the adhesive bond. This is cosmetic until moisture gets under the laminate and swells the substrate, then it’s a door or panel replacement.
- Swollen or soft cabinet substrate. Water intrusion around the sink base or dishwasher. Once the particleboard core swells it won’t return to shape, and the fix is a new panel or box, not a patch.
- Cracked or separated countertop seams and backsplash joints. Movement in the cabinet run telegraphs up into the surface. Caught early it’s a re-seal; ignored, it’s a countertop section.
Replacement Cost & What’s Included
Installed ranges for Enterprise, with parts and labor in one written price before any work starts:
- Full kitchen remodel (CGI-compatible): $14,000 – $45,000
- Small kitchen remodel: $9,000 – $20,000
- Cabinet installation: $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
What drives the range: cabinet count and door style, whether the boxes are stock or semi-custom, the surface material you choose, and how much of the existing run can be reused. We put the number in writing first, and every project carries our written guarantee with terms stated plainly, including what’s covered and for how long. We also work with KraftMaid, Cambria and Silestone where a homeowner wants to match or upgrade around the CGI pieces.

See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this is genuinely owner-safe. You can photograph labels, measure hinge bore and screw spacing, check drawer glides for debris, tighten a loose hinge screw, and re-caulk a separating backsplash joint. That’s the honest line. Where DIY goes wrong: cabinet and door replacement means leveling a run, matching the hinge series to the bore, and getting the reveal even across five doors. A single mismatched glide or over-tightened screw strips the particleboard and you’re replacing a box instead of a hinge. Countertop removal carries real injury risk from weight and sharp edges, and any work near wiring for a dishwasher or disposal should go to a trained professional. If you’re unsure, call (844) 797-6157 and we’ll tell you plainly whether it’s a five-minute fix or a real job.
FAQs

How long should CGI kitchen cabinets and surfaces last in Enterprise? Most CGI cabinet hardware and glides hold 10 to 15 years in normal use, and doors and boxes often go longer if the substrate stays dry. Enterprise’s dry heat and big seasonal swings wear hardware and adhesive bonds faster than a coastal climate, so expect glides and edge banding to be the first things to need attention.
Can it be repaired instead of replaced? Often yes. A worn glide, a loose hinge, a re-sealable countertop seam, or a re-glued edge band are repair jobs, not replacement jobs. Swollen substrate or a cracked door face usually isn’t, because the material won’t return to shape. Call (844) 797-6157 for a free estimate and we’ll tell you which one you’re looking at.
How long does the swap take? A single hinge or glide set is a short visit, an hour or two. A cabinet run or countertop section is typically a full day or more depending on scope. We give you the timeline with the written price, before work starts, so you can plan around it.
How do you source the CGI part? We identify your model from the label and hardware photo set, confirm the specification, then source the OEM part or a quality aftermarket equivalent where finish doesn’t show. We don’t claim to stock parts or carry them on a truck; we order what your model needs and schedule the install around the delivery.
Get a Written Price on Your CGI Kitchen Project
Mason Remodeling Enterprise puts the price in writing before any work begins, verifies every technician through The Threshold Standard with their name and photo sent before the visit and a photo ID badge at the door, and backs every project with our 365-Day Done Right Promise. Call (844) 797-6157 for a free estimate on your Enterprise kitchen.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












