A Mason company - serving Enterprise, NV
A new rear addition with a vaulted beamed ceiling and tall windows
CGI · Enterprise

CGI Home Additions & ADU in Enterprise, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Enterprise
A single-story rear room addition with tall windows and a new patio
A second-story addition that matches the existing roofline
A remodeled living room with built-in shelves around the fireplace
An open kitchen and dining area after a remodel
A freestanding soaking tub in a remodeled primary bathroom
A whole-home remodel with the living, dining and kitchen areas opened up
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Home Additions & ADU: The Enterprise Owner’s Guide

We install CGI-compatible home additions and ADU packages in Enterprise, and the honest number for a finished, permitted addition here runs $45,000 – $130,000 depending on square footage, foundation and whether you’re touching plumbing. Equipment-specific parts, like a replacement window unit, panel, or door hardware on a CGI-structured build, are usually sourced and swapped within days, not weeks. Most Enterprise owners first notice trouble the same way: a room that never heats evenly, a soft spot near a slider, a hairline crack above a header, or a door that suddenly won’t latch in July.

Two construction workers carrying drywall panel in a residential home hallway in Enterprise, NV

Call (844) 797-6157

Those symptoms aren’t cosmetic. In a CGI-framed addition they almost always point to a failed component in the envelope or the structural tie-in, and the faster you match the right part to the right model, the less of the build you end up paying to redo.

Key Takeaways

  • A finished addition in Enterprise: $45,000 – $130,000. An ADU: $90,000 – $220,000. A garage conversion: $30,000 – $80,000.
  • Match parts to your CGI series by the data plate and stamped dimensions, not by eye.
  • Nevada’s 100°F-plus summers and monsoon wind load both stress envelope components harder than a coastal climate does.
  • Every job gets a written price before any work starts and a written guarantee covering 365 days from completion.

Which CGI Models This Applies To

A wide opening with a new beam where the kitchen wall was removed

CGI builds in Enterprise fall into a few families: single-story room additions, two-story and second-floor bump-outs tied into the existing roof line, and detached or attached ADU structures. Each family uses different tie-in hardware, header sizing and envelope details. The part you need is defined by your structural series and the load class stamped on the plans or the data plate, not by the year the build went up.

Here’s where owners get burned. Two CGI additions built the same year can carry different sill heights and different wind-load ratings, because Enterprise sits in a high-wind and high-heat zone and plans get amended on site. That’s the compatibility gotcha: the part that fits your neighbor’s CGI addition down the street often will not fit yours. Confirm the dimension and the load rating off the plate before you order anything.

The OEM versus aftermarket decision matters here too. CGI’s factory components give you an exact fit and a documented spec, which is what you want on load-bearing tie-ins or anything punched through the envelope. Quality aftermarket equivalents are fine for trim, hardware and non-structural parts, and they usually cost less. We source both.

Mason Remodeling Enterprise is an independent service provider and is not affiliated with CGI. We work with CGI-built homes, we don’t represent the manufacturer.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Home Additions & ADU Is Failing

Watch for these five, and note the cause under each. They tell you whether you’re facing a small part swap or something structural.

  • A door or slider that won’t latch in summer. Wood and composite framing swell as temperatures climb past 100°F in Enterprise, and a failing threshold or header tie lets the frame move. That’s a settling component, not a sticky door.
  • Hairline cracks radiating from a corner or above a header. The tie-in hardware is working loose from the existing structure. Small cracks near openings are usually a fixable part; cracks running across a whole wall mean the load path needs a look.
  • Soft spots or water staining near a wall-floor junction. Envelope or flashing failure. Once water gets behind the finish, the framing underneath starts to go, and you want to catch this fast in a rainy season.
  • A room that heats unevenly or a cold spot along one wall. An insulation or window unit has failed. You feel it before you see it, and it shows up on the power bill before either.
  • Sun-faded, chalky, or cracked sealant at exterior joints. UV in Enterprise eats cheap sealants in two or three years. It’s the cheapest thing to fix and the most expensive thing to ignore.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s where Enterprise owners usually need a real number before they decide anything:

  • Kitchen remodels inside an addition: $14,000 – $45,000
  • Bathroom remodels inside an addition: $9,000 – $28,000
  • Full home addition: $45,000 – $130,000
  • ADU construction: $90,000 – $220,000
  • Garage conversion: $30,000 – $80,000

What pushes you toward the top of a range: foundation work, plumbing or electrical relocation, roof tie-in complexity, and whether the part is structural or cosmetic. A load-bearing tie-in part costs more than trim hardware, full stop.

Two construction workers carrying drywall panel in a residential home hallway in Enterprise, NV

Every Mason Remodeling Enterprise project comes as a written, line-item price before a single tool comes out of the box. No verbal estimate. No change-orders that appear on the final bill. The work is covered by a written guarantee for 365 days from the completion date, and if a repair or installation fails in that window, we return at no charge.

DIY or Call Us?

You can safely check a lot of this yourself. Look at the data plate for the series and load rating, measure the part’s mounting points, photograph the joint or the failure, and note whether the issue is cosmetic or structural. That information is genuinely useful to have in hand when you call.

Where DIY goes wrong: load-bearing tie-ins, envelope penetrations, window unit swaps above the first floor, and anything involving the addition’s electrical or plumbing. A structural tie-in that isn’t torqued or matched to the right load class is a serious safety issue, not a weekend project. Window and panel work up high is dangerous for the same reason.

The safest thing you can do is let a trained professional handle the parts that keep the structure sound. Our technicians have up to 22 years of experience with CGI and similar builds, and they’ll bring the right part and the right torque the first time. Call (844) 797-6157 and we’ll set up a free estimate.

FAQs

Footing forms with tied rebar for a home addition

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A small remodeled galley kitchen with cabinets to the ceilingA low-threshold walk-in shower with a bench and grab barA finished basement family room with a media wall and wet barA walk-in pantry with wood shelvingA powder room with botanical wallpaper and a stone sinkAn open living space after a whole-home remodel

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Enterprise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Enterprise team

A local vetted partner works across Enterprise and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-6157
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Mason Remodeling Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch