







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Driveway & Pavers: The Enterprise Owner’s Guide
We install and repair CWS driveway and paver systems throughout Enterprise, and a full paver driveway replacement typically runs $7,000 to $18,000 installed, while targeted repair of a failed section or base often lands between $700 and $3,200 depending on square footage. We can usually get a written, itemized quote to you within a day of your call. Enterprise owners most often discover a problem the same way: a low spot that holds water after a summer storm, pavers that rock underfoot when they walk to the mailbox, or a hairline gap along the driveway edge that keeps widening through monsoon season. By the time the weeds push through the joints, the base has usually been moving for a while.

Which CWS Models This Applies To

CWS hardscape systems show up in Enterprise in a few recurring configurations, and identifying yours correctly is the whole game. The easiest place to start is the delivery paperwork or the stamp on the paver edge if it is still legible; failing that, measure a single unit’s length, width, and thickness to the nearest millimeter, because CWS runs both a standard and a thinner profile that look identical from above but behave differently under a vehicle load. The thickness difference is the compatibility gotcha most homeowners miss: a replacement course of the thinner profile laid against the heavier one will telegraph a lip within a season of desert heat cycling.
On the OEM-versus-aftermarket question, we’re straight with you. For color-matched CWS units, genuine product is worth the wait when you’re spot-repairing a visible area, since an off-brand paver that’s close in color won’t match once the Nevada sun has faded the originals. For base aggregate, bedding sand, edge restraint, and polymeric joint sand, specification-grade equivalents from manufacturers like Belgard, Unilock, and Techo-Bloc perform as well or better, and we’ll tell you which is which on the quote. We’re an independent service provider and not affiliated with CWS, so our recommendation is based on what your Enterprise driveway actually needs, not on a brand quota. If you also have KraftMaid, Cambria, or Silestone surfaces indoors that need attention, we handle those too, but this page stays on the driveway.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Driveway & Pavers Is Failing
These are the five symptoms we see most in Enterprise, and what each one is usually telling you:
- Ponding water after rain. A paver field that holds water has a settled base or a blocked subgrade drain; the surface is a symptom, not the cause, and re-leveling without fixing the base just resets the clock.
- Pavers that rock or sound hollow. Loss of bedding sand or a compromised aggregate base underneath; in our caliche-heavy soil, a shallow base is the usual culprit.
- Widening joints and migrating sand. Polymeric joint sand that’s washed out or was never properly activated, which lets units shift and invites weeds into the gaps.
- Edge restraint pulling away. The perimeter restraint has loosened from the base, and without it the whole field creeps outward under summer heat expansion.
- Spalling, chips, or color loss. Normal UV and thermal wear on the paver face; desert temperature swings of 40 degrees between day and night accelerate it, and a sealer schedule is what slows it down.
If you’re seeing two or more of these, the repair is worth doing before monsoon season, not after.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s how the numbers break down for Enterprise, with parts and labor shown honestly rather than buried in a lump sum:
| Scope | Typical Installed Range |
|---|---|
| Full paver driveway installation | $7,000 – $18,000 |
| Paver driveway replacement (tear-out and reinstall) | $5,000 – $14,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
What moves you within those ranges: square footage, base depth required by your soil, whether edge restraint and drainage need rebuilding, and whether the color match calls for genuine CWS units or an approved equivalent. Every project gets a written, itemized price before any work starts, and the workmanship carries our 365-Day Done Right Promise, which means if something isn’t right within a year of completion, we make it right at no cost to you.

DIY or Call Us?
Some of this is genuinely safe to check yourself. Walk the field and note which units rock, look for low spots after a hose test, sweep a joint to see how much sand has washed out, and confirm the edge restraint is still tight against the border. That inspection tells you a lot, and we’re happy to talk through what you find.
What we’d steer you away from is lifting and resetting a course over a base you haven’t diagnosed, or compacting new units without the right plate and bedding depth. On a driveway, a base that’s an inch shallow will fail under a vehicle no matter how carefully the top goes back down, and you’ll be redoing it in a season. That’s the point where a professional assessment saves money. Call (844) 797-6157 and we’ll give you a free, written estimate so you know exactly what you’re dealing with before you spend anything.
FAQs

A properly installed paver driveway typically lasts 25 to 30 years in Enterprise’s climate, and the base matters more than the pavers. Our desert heat cycling and monsoon runoff are hard on a shallow base, so resealing every two to three years and fixing edge restraint early is what gets you to the top of that range. Call (844) 797-6157 for a free assessment of yours.
Yes, often it can. If the failure is localized, we can lift the affected units, rebuild the base beneath them, and relay the same pavers with fresh bedding and joint sand, which usually costs a fraction of a full replacement. The determining factor is whether the base failure is isolated or spread across the field; our technician will tell you straight which one it is. Call (844) 797-6157 for an exact quote, and the estimate is free.
A spot repair is usually a one-day job, while a full driveway replacement typically takes three to five days including base work and curing. Weather and square footage drive the timeline, and we’ll put the schedule in writing before we start so there are no surprises. Call (844) 797-6157 to get your free estimate and a projected timeframe.
We match your unit by measuring thickness, dimensions, and color against CWS specifications, then source genuine product for visible color-matched areas and specification-grade equivalents for base and joint materials where they perform equally well. We don’t claim to stock parts or carry them on a truck, so we’ll confirm lead times for your specific profile before you commit. Our technicians bring up to 22 years of experience to the match. Call (844) 797-6157 to schedule your free estimate.
When you’re ready to know exactly what your Enterprise driveway needs, call Mason Remodeling Enterprise at (844) 797-6157 for a free estimate. You’ll get a written price before any work begins, a crew member introduced to you by name and photo before they arrive, and a live person on the line whenever you call. We hold every job to The Threshold Standard, and our work is backed by the 365-Day Done Right Promise.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












