







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Driveway & Pavers: The Enterprise Owner’s Guide
We install and replace ES Windows-compatible driveway and paver assemblies in Enterprise. Expect $7,000 – $18,000 for a full paver driveway, $4,500 – $12,000 for concrete, $3,500 – $9,000 for asphalt, $3,500 – $11,000 for a paver patio, and $250 – $700 for sealing, all quoted in writing before any work starts. Most Enterprise owners find out the assembly has failed the same way: a sunken corner near the garage apron, a paver that rocks underfoot when the summer ground shifts, or water pooling against the slab after a monsoon downpour instead of draining away.

Which ES Windows Models This Applies To

ES Windows manufactures window and door systems, and their driveway and paver work sits under hardscaping specs rather than a single part number. The “ES Windows” line on an Enterprise contractor’s quote usually means the finished assembly is being matched to the manufacturer’s product specification for the exterior opening it ties into: sill height, threshold clearance, and drainage away from the foundation. You identify the correct spec by locating the window label inside the frame’s upper corner and noting the series, dimensions, and glass code.
When we price your Enterprise driveway and pavers, we compare OEM-spec base and joint materials against quality aftermarket equivalents (Belgard, Unilock and Techo-Bloc all supply professional-grade pavers that meet the same load and drainage requirements). OEM parts match the original window profile exactly; aftermarket equivalents often cost 15 – 30% less and carry the same warranty coverage on our work. We’ll tell you which one your opening actually needs.
Matching the Right Spec to Your Opening
- Series and dimensions: note the exact window label and the rough opening size – a half-inch of mismatch causes drainage failures along the sill.
- Threshold clearance: the paver or concrete edge must sit below the sill by the spec’d height so monsoon rain sheds outward.
- Drainage route: we map where the Enterprise ground slopes – 2% minimum away from the house is standard.
- Coefficient of expansion: Nevada’s 100°F-plus summers move concrete and pavers more than coastal specs allow for; the base and joint material has to account for it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Driveway & Pavers Is Failing
These are the failure patterns we see on Enterprise properties again and again. The cause matters more than the symptom, so read each one before you call.
- Sunken or heaved pavers near the garage or window wall: base compaction has failed and soil moisture is shifting underneath. Left alone, the whole field settles unevenly.
- Water pooling against the foundation after summer storms: drainage slope has reversed or a sand joint has washed out. This is the failure that pulls moisture against the window sill.
- Rocking or loose pavers: joint sand has eroded and the bedding layer is no longer supporting the unit. It feels minor but usually means underlayment is gone.
- Hairline cracks spreading across concrete or asphalt: thermal cycling in Nevada’s day-to-night temperature swing cracks a slab that wasn’t properly jointed or sealed.
- Faded, chipped, or algae-stained paver faces: surface wear from UV and the alkaline soil, often reversible with cleaning and re-sealing if caught early.
Replacement Cost & What’s Included

We give Enterprise homeowners installed price ranges up front so you can self-qualify. A full paver driveway installation runs $7,000 – $18,000; concrete installation $4,500 – $12,000; asphalt paving $3,500 – $9,000; driveway replacement $5,000 – $14,000; paver patio installation $3,500 – $11,000; and sealing $250 – $700. What drives the range: square footage, base prep depth, whether existing material needs demolition and haul-away, and the paver or concrete spec you choose. Every quote is a written line-item breakdown – material, labor, base prep, and disposal, all stated plainly before a single shovel hits ground.
Every driveway and paver project we complete is backed by the 365-Day Done Right Promise: if the work isn’t right within 365 days of completion, we fix it at no cost. The written guarantee names exactly what’s covered and what isn’t.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There’s a safe split here. You can safely check drainage by watching where water flows during the next rain, photograph the paver pattern, confirm the window label info, and note where pavers rock. What we don’t recommend: pulling up a patio or driveway field yourself to inspect the base. Once pavers come off the bedding layer, you’re disturbing compacted base and potentially the window-wall waterproofing, and a 200-square-foot field that took a crew half a day to set doesn’t go back the same way by hand.
If your concrete slab has cracked through, DIY patching hides the problem for a season and lets the crack walk underneath. Call (844) 797-6157 for a free estimate. A live person answers any hour, any day – including weekends and holidays – and you’ll get the technician’s name and photo before we ever show up.
FAQs

A properly installed paver driveway lasts 25 – 50 years in our climate, concrete typically 20 – 30 years, and asphalt 15 – 20 years before resurfacing. The Nevada sun and freeze-thaw nights at elevation shorten the lower end of each range unless the material is sealed every 3 – 5 years. Call (844) 797-6157 for a free assessment of what your assembly actually needs.
Sometimes yes. Isolated sunken pavers, washed-out joint sand, and minor surface cracks are often repairable for a fraction of replacement cost. A driveway with multiple failed zones or reversed drainage usually needs full replacement. We tell you honestly which situation yours is during the free estimate.
A paver driveway typically takes 2 – 4 days from demolition through final compaction and joint sand; concrete needs another 5 – 7 days of cure time before you drive on it. We schedule around your calendar and give you the timeline in writing with the quote.
We source materials from professional-grade suppliers – Belgard, Unilock and Techo-Bloc for pavers, with OEM-spec options available when a specific window profile requires exact compatibility. If the original spec is discontinued, we identify an equivalent that meets the same load and drainage requirements. Every material sourced is specified in your written quote. We’re an independent provider, not affiliated with ES Windows. Call (844) 797-6157 to talk through what your opening needs.
Why Enterprise Homeowners Call Mason Remodeling
Mason Remodeling has worked in general contracting, bathroom remodeling, and whole-home remodeling since 2004, part of the Threshold Group family of home-service companies. We also service KraftMaid cabinetry, Cambria and Silestone surfaces when your project touches those rooms. Every crew member is background-checked, identity-verified, uniformed, and introduced to you by name and photo through The Threshold Standard before they arrive, with a photo ID badge at the door. Our technicians have up to 22 years of experience on exterior and hardscape work. The price you receive in writing before work starts is the price on your final invoice, and a live person is on the phone any hour, any day. When a job needs more than the paver field – a roof repair, a window replacement, a full driveway rebuild – we quote it alongside the hardscape so you’re not chasing two contractors.
Call (844) 797-6157 for a free estimate on your ES Windows driveway and paver project in Enterprise. You’ll get a written price, a verified crew, and the 365-Day Done Right Promise behind the work.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












