







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Home Additions & ADU: The Enterprise Owner’s Guide
We install ES Windows-compatible home additions and ADU packages in Enterprise, with typical installed projects running $45,000 – $130,000 for a home addition and $90,000 – $220,000 for a detached or attached ADU. Every project starts with a written price before any work begins. Mason Remodeling Enterprise is an independent service provider and is not affiliated with ES Windows.

Enterprise homeowners usually come to us after a different discovery: a framed addition where the ES Windows units were ordered in the wrong series, or a permitted ADU plan where the window schedule no longer matches what ES Windows still manufactures. Sometimes the failure is a rough opening that was framed too shallow for the window’s required depth, and the frame has begun to bow. Other times a builder swapped to a cheaper glazing package in the middle of a job, and the homeowner only finds out when the summer heat hits. The pattern is always the same: the window package and the build plan stopped agreeing with each other, and someone needs to sort out the compatibility before the drywall goes up.
Which ES Windows Models This Applies To

ES Windows builds primarily for the Nevada and Florida markets, and its product lines split into impact-rated and non-impact-rated series. In Enterprise, nearly every addition or ADU will need impact-rated units to satisfy local wind requirements, which means the series matters before the first window is ordered. The most common compatibility mix-ups we see involve the aluminum single-hung and slider series, where the frame profile of the impact-rated version is deeper than the non-rated version, and an addition framed to the wrong depth won’t accept the right window.
To identify what you’re working with, look for the ES Windows label inside the head jamb of each unit, usually a silver foil sticker with the series name, size code, and glass designation. If the sticker is gone, measure the rough opening (the framed hole, not the window itself), then measure the visible glass and frame face. Those three numbers will usually let us identify the series. The OEM-versus-aftermarket call is different on an ES Windows project than on a generic replacement: ES Windows OEM units are still available for most series, but the lead time and the required matching of impact ratings make the decision practical rather than just budgetary. We treat this as a compatibility question first, price second.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Home Additions & ADU Is Failing
On an addition or ADU, “the part” isn’t one component. It’s the whole window package plus the structural opening prepared for it. These are the five failures we see most in Enterprise:
- Water intrusion at the sill after a monsoon. Desert rain arrives hard and fast, and a sill pan that was installed without proper slope, or a window set into a rough opening that was never flashed at the head, will let water behind the stucco. You’ll see it as a stain on the interior drywall, not at the window itself.
- Draft at the frame even when the sash is latched. In an ES Windows unit that’s been in for a decade or more, this is usually a worn weatherstripping gasket shrinking in the dry heat. In a newer addition, it’s more often a window installed out of square, leaving a gap that no gasket will close.
- Fogging between the panes. Seal failure in the insulated glass unit. ES Windows impact glass is a sealed assembly, and Enterprise’s extreme temperature swing (over 100°F in summer, freezing nights in winter) is hard on the perimeter seal. Once the seal breaks, the glass has to be replaced, not repaired.
- Sticking or hard-to-operate sashes. The frame has absorbed moisture or the addition settled slightly, and the window is now binding. In a permitted ADU this is worth investigating because it can point to a foundation or framing issue, not just a window issue.
- Cracks or separation at the window-to-wall joint. Stucco or siding has pulled away from the frame. In Enterprise this is often the first visible sign that the rough opening was framed too tight, leaving no room for the window to expand and contract.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed ES Windows-compatible replacement and addition pricing in Enterprise runs as follows:
- Home Addition (with ES Windows package): $45,000 – $130,000
- ADU Construction (attached or detached): $90,000 – $220,000
- Garage Conversion to ADU: $30,000 – $80,000
- Impact Window Installation (replacement units only): $8,000 – $25,000
- Window Replacement (non-impact): $4,500 – $15,000
The range on an addition is driven mostly by square footage, whether the foundation is slab or stem wall, the ES Windows series you need, and whether the ADU requires a separate utility trench. Every project gets a written, line-item price before any work begins. The workmanship is covered by a written guarantee for 365 days from the completion date, and if a repair or installation fails in that window, we come back free of charge.
DIY or Call Us?
You can safely do several things yourself before calling. Find the ES Windows label in the head jamb and photograph it. Measure the rough opening and the visible glass. Note whether the unit is impact-rated. Check for water staining on interior drywall near the window. Those are checks, not repairs.
Where DIY goes wrong on this part: setting a window into an addition or ADU opening is structural work. It involves flashing, sill pan integration, and matching the rough opening to the specific ES Windows frame depth. An incorrectly flashed window won’t show its failure for a year or two, and by then the stucco and framing behind it are wet. We don’t recommend homeowners attempt the installation. For an honest read on whether your existing ES Windows package can be worked into a new addition, call (844) 797-6157. Estimates are free and a live person answers every call, day or night.
FAQs

Expect 20 to 30 years for the window frame and sash, and 10 to 15 years for the insulated glass seal in Enterprise’s climate. The dry heat and the wide daily temperature swing are harder on the glass seal than on the frame. When the seal fails, the unit will fog between the panes and needs replacing. Call (844) 797-6157 for an exact quote on replacement.
Sometimes. Weatherstripping, gaskets, and hardware can be replaced. Fogged insulated glass can be swapped by a glazier. What can’t be repaired is a frame that’s out of square or a sill pan that was flashed wrong, and in an addition or ADU that’s usually the real problem. Call (844) 797-6157 and we’ll tell you honestly which you’re facing.
A single-unit replacement is typically a half-day to a day. A full window package for a new addition or ADU depends on the size of the project and the ES Windows lead time, which we confirm before scheduling. Call (844) 797-6157 to talk through your project timeline.
We source OEM ES Windows units and components through authorized distribution channels, and we match the series, size, and impact rating to your specific build before ordering. We don’t stock parts and we don’t carry parts on a truck. Every part is ordered to your project. Call (844) 797-6157 to start a compatibility check.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












