







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Bathroom Remodeling: The Enterprise Owner’s Guide
We install Barrette-compatible bathroom remodeling in Enterprise, and a full bathroom runs $9,000 – $28,000 installed; a small bathroom lands between $5,000 and $12,000. If you’re here because a shower door track has jumped its rail, a vanity drawer front has swelled and split, or a Barrette shower cartridge has stopped holding temperature, you’re in the right place. In our experience, owners in Enterprise usually discover the failure the same way: water pooling where the door seal used to sit, a drawer that no longer closes flush, or a tub diverter that sends water up the wall. All three point to a component that’s done its job.

Which Barrette Models This Applies To

Barrette built bathroom products across several lines, and the part you need depends on which line is in your bathroom. The model tag is usually on the inside of the vanity door, on the back of the shower surround panel near the valve, or on a sticker behind the toilet. Read it before you order anything; two Barrette shower surrounds that look identical can use different cartridge bodies.
The other identification job is measurement. Barrette shower door track comes in standard widths, and a track that’s off by a quarter inch will leak no matter how carefully you seal it. Measure the opening at the top, middle and bottom; if those three numbers disagree, the wall is out of plumb and the replacement track won’t fix the leak on its own.
On the OEM-versus-aftermarket question: for shower cartridges and door rollers, a quality aftermarket equivalent from a fixture line we partner with (Moen, Kohler, Grohe, Toto) often outlasts the original at a lower price, and it’s what we install most often. For vanity cabinetry and drawer hardware, match the Barrette spec exactly – KraftMaid and Wellborn give us the closest professional-grade fit. We don’t stock Barrette parts and nothing rides on a truck, so we source per project after we’ve confirmed the model. Mason Remodeling Enterprise is an independent service provider and is not affiliated with Barrette.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Bathroom Remodeling Is Failing
- Water on the floor outside the shower. The door sweep or the track’s weep holes have clogged or hardened. In Enterprise’s hard water, mineral scale packs those channels faster than most owners expect.
- The shower door drifts or won’t stay shut. Rollers or the pivot hardware have worn flat. A door that swings on its own usually needs new rollers, not a new door.
- A vanity drawer front is cracked or swollen. Moisture has invaded the substrate at the edge. Once the core swells, it won’t flatten back, and no amount of clamping brings the joint closed again.
- The valve handle turns but the water temperature won’t hold. The cartridge’s internal seals are worn. This is the most common Barrette valve failure we see, and it’s also the one most likely to cause a slow leak behind the wall.
- Caulk lines keep reopening. Repeated failure at the same joint means the surface behind the caulk is moving or taking on water. New caulk over a wet substrate fails again within weeks.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work runs in Enterprise, with the exact ranges we quote:
| Scope | Installed price |
|---|---|
| Full bathroom remodel (Barrette-compatible fixtures and finishes) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Vanity installation | $800 – $3,000 |
What drives the range: whether the wall behind the surround is sound or has been taking water, whether tile work is involved, the fixture tier you choose, and how much the subfloor has to be corrected. Every project gets a written price before any work starts – not a verbal number that grows on the final bill. Each crew member is identity-verified under The Threshold Standard and you receive their name and photo before the visit, plus a photo ID badge at the door. Our technicians have up to 22 years of experience. Work is covered by a written guarantee with plainly stated terms, and if a repair or installation fails within 365 days of completion, we return at no charge under the 365-Day Done Right Promise.
DIY or Call Us?
Some checks are safe and worth doing yourself. Write down the model tag, photograph it, measure the shower opening in three places, and test the valve to see whether the failure is temperature or flow. That information shortens the job for whoever installs the replacement.
Some steps are not safe to handle alone. Anything involving the valve body behind the wall means shutting the water and opening a wall; if the shutoff is seized, you’re looking at water damage from a failed attempt, not a repair. A shower door with a cracked pivot or broken roller arm can drop, and that’s tempered glass moving under load. We suggest letting a trained professional handle the valve and door hardware; the wall comes open either way, and the difference is whether it goes back closed correctly. Live person answers our line every hour of every day.
Call (844) 797-6157 to schedule your free estimate in Enterprise – we’ll confirm your Barrette model, quote a written range, and tell you honestly whether a repair or a replacement makes more sense.
FAQs

Expect roughly 10 to 15 years from a shower cartridge or door roller set, and about 15 to 20 years from a vanity cabinet in good conditions. Enterprise’s hard water is the main accelerator – mineral buildup eats seals faster here, so cartridge swaps tend to arrive earlier than the manufacturer’s spec suggests. Our technicians have up to 22 years of experience with this pattern. Call (844) 797-6157 for an exact quote – estimates are free.
Sometimes, yes. A worn cartridge and a clogged door track are both straightforward repairs that restore full function for a fraction of a full remodel. Swollen cabinet substrate and a warped surround panel cannot be repaired; the material is already damaged through. We’ll tell you which one you’re facing before any work begins. Call (844) 797-6157 to schedule your free estimate.
A cartridge or roller swap is a short visit; a shower replacement runs one to three days; a full bathroom remodel typically takes two to four weeks depending on tile and fixture lead times. The written price states the expected timeline before we start, so you know what to plan around. Call (844) 797-6157 for an exact quote.
We pull the model tag from your bathroom first, then order the exact-spec replacement or the professional-grade equivalent we’ve found most durable – typically a Moen, Kohler, Toto or Grohe cartridge, and KraftMaid or Wellborn cabinetry for vanity work. We don’t promise stock; every part is sourced to your confirmed model. Cambria, Silestone and Caesarstone handle our surface work when a countertop is part of the project. Call (844) 797-6157 to schedule your free estimate in Enterprise.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












