







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Windows & Doors: The Enterprise Owner’s Guide
We install Barrette-compatible windows and doors throughout Enterprise, and a full window replacement typically runs $4,500 – $15,000 while impact-rated installation runs $8,000 – $25,000. Most owners don’t call us until something specific breaks: a sash that won’t stay up, a door that drags the threshold, or a hinge that has started to pull loose from the frame. By then the part has usually been failing quietly for months.

Barrette is one of the more common window and door fabricators in Southern Nevada, so we see their hardware on a lot of Enterprise homes. When a part goes, the fix is rarely the whole unit. It’s a hinge, a roller assembly, a sash balance, a weatherstrip seal, or a lock mechanism that a trained technician can replace and have operating like new again.
Key Takeaways
- Barrette-compatible parts are model-specific. The Series label on the frame is what identifies the right part.
- Most failures here trace to UV exposure and desert temperature swings, not defects.
- Replacing hardware on Barrette windows normally takes a half-day or less per unit.
- We pull written pricing before we start, so there are no surprise line items.
Which Barrette Models This Applies To

Barrette windows and doors span several product lines, and the part you need depends on which one you have. The most reliable identification is the manufacturer’s label on the window frame or door jamb, usually a small sticker in the sash channel or along the head of the frame. It tells you the series and often the manufacturing date, which matters because Barrette revised hinge and balance designs over the years and older assemblies don’t always match newer replacements.
If the label is gone or unreadable, we measure instead. Sash width, sash height, balance length, and the pivot shoe profile together identify the correct part in nearly every case. This is why we don’t sell parts over the phone by description alone.
On the OEM-versus-aftermarket question: for a Barrette unit, an exact OEM replacement is the clean fit when it’s available. When it isn’t, a quality aftermarket equivalent can work well, provided the balance rating, spring tension, and shoe profile all match the original. The wrong aftermarket part is where novice installations go wrong. We match the part to your unit, not the other way around. We also work with KraftMaid, Cambria, and Silestone on the kitchen and bath side, so if a window swap is part of a larger remodel, it’s handled under one written scope.
One thing worth saying plainly: Mason Remodeling Enterprise is an independent service provider. We’re not affiliated with Barrette, and the Barrette name is used here only to identify the products we service.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Windows & Doors Is Failing
Barrette hardware doesn’t usually fail all at once. It wears, and owners notice in stages.
- The sash won’t hold its position. A balance or spiral spring has lost tension, usually after years of heat cycling. Barrette double-hungs are the most common case we see.
- Water or air gets past the frame. The weatherstrip or sweep has compressed and hardened. In Enterprise, the dry air and summer sun break down foam and vinyl seals faster than in milder climates.
- The door drags or rubs the threshold. Hinges have worn or the door has shifted. Left alone, the dragging edge wears the finish down to bare material.
- The lock or latch won’t engage cleanly. A worn lock mechanism, misaligned strike plate, or a handle that turns without engaging. This is often the first thing owners want fixed because it affects security.
- Condensation between panes or a cloudy look. The insulated glass seal has failed and moisture has entered the gap. This one requires glass or sash replacement, not just hardware.
Older Barrette units in Enterprise frequently show the balance failure and the weatherstrip failure together. If you’re noticing both, it’s usually worth replacing both in one visit rather than calling us back twice.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for Barrette-compatible window and door work in Enterprise falls into consistent ranges depending on scope:
| Work | Typical Installed Price |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Hardware or balance replacement (per unit) | Quoted per job |
| Door hinge, sweep, or lock replacement | Quoted per job |
What drives the range: number of units, whether glass has to be replaced, and impact-rated versus standard. We give you the part cost and labor cost as separate line items so you can see exactly what you’re paying for. Every job comes with a written price before any work starts and the 365-Day Done Right Promise. If a repair or installation fails within that year, we return and make it right at no cost.
DIY or Call Us?
You can safely handle a few checks. Inspect your Barrette label and photograph it. Test each sash by moving it up and down and noting where it loses tension. Look at the weatherstrip for cracking and feel for daylight gaps around a closed door. Those observations help us quote faster.
Where DIY goes wrong: sash balances are tensioned springs under load, and replacing one without the right tool and the right technique can snap the assembly or damage the frame channel. Impact-rated glass and door hinges that carry the weight of a full slab are also unforgiving. We recommend a trained technician for balance and hinge replacement, and we handle it under a written quote. Call (844) 797-6157 for a free estimate.
FAQs

With proper seals and hardware, most Barrette window and door units hold up well for 15 to 20 years. In Enterprise’s heat and UV exposure, hardware and weatherstrip tend to wear faster than the frame and glass, so expect a hardware refresh somewhere in that range before the unit itself needs replacing.
In many cases, yes. A balance, hinge, lock, or sweep can often be replaced without removing the window or door. Glass seal failure and cracked sashes need replacement rather than repair, and we’ll tell you plainly which one you’re facing before any work begins.
A single window or door hardware replacement is usually a half-day or less. Multi-unit jobs run longer, and impact glass installs have their own timeline. We confirm the window of time with you before work starts, so you can plan around it.
We identify your exact model from the frame label or by measurement, then source an OEM replacement when available or a matched aftermarket equivalent when it isn’t. Your written quote itemizes the part separately from labor, so you see exactly what’s being installed and why it fits.
If you’ve found a failing part on a Barrette window or door in Enterprise, the fastest way to a straight answer is to call. Tell us the series if you can find the label, and we’ll give you a written price range for the fix. Call (844) 797-6157 to schedule your free estimate. Our technicians have up to 22 years of experience with windows, doors, and the hardware that keeps them working.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












