







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Driveway & Pavers: The Enterprise Owner’s Guide
If a Jerith paver or driveway component has failed on your property, we install Jerith-compatible replacement pavers and hardscape parts here in Enterprise, and a typical installed paver driveway project runs $7,000 – $18,000, with individual paver and border-piece replacements priced far lower as line items on a written quote. We’re an independent service provider, not affiliated with Jerith, but our technicians have up to 22 years of experience working with their products and know the lines well.

Most Enterprise owners find out something failed the same way: a paver lifts at the edge of the drive after a summer of 110-degree afternoons, a corner chips where the tire tracks cross it, or a border course settles and leaves a lip you catch with the mower. By the time you notice the wobble, the sand joint underneath has usually been washing out for a season or two.
Which Jerith Models This Applies To

Jerith makes its hardscape line in distinct profiles, and the part you need depends on which profile is already on your property. The common failure point is the border and accent piece, not the field paver, because the border takes the edge-load from vehicles turning into the drive. Before we quote anything, we identify what you actually have: the paver’s face profile, its nominal thickness, and the color family. That identification is what keeps a replacement from standing out as a mismatched patch.
Here’s the compatibility gotcha most owners miss. Jerith’s color and finish names have shifted across production runs, so a “Sandstone” paver from one run can sit next to a “Sandstone” from another and read slightly warmer or cooler in Enterprise’s hard afternoon sun. A part number alone won’t always tell you. We ask for a photo of the failed piece next to a coin or ruler for scale, plus a wider shot of the drive, and we compare the actual surface texture before ordering. If an exact match isn’t available, we’ll tell you plainly and show you the closest option.
On the OEM-versus-aftermarket question: an OEM Jerith piece is the safest match for color and dimension, but a quality aftermarket equivalent in the same thickness and profile is often a fine substitute for a field paver that isn’t on a visible edge. We quote both when it makes sense and explain the trade-off rather than pushing one. We don’t claim to stock Jerith parts or carry them on a truck; we source the right piece for your specific model and bring it to the job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Driveway & Pavers Is Failing
These are the symptoms we see most often on Enterprise driveways and walkways, and what’s usually going on underneath each one.
- A paver rocks or feels spongy underfoot. The bedding sand beneath it has shifted or washed out, often after monsoon runoff finds a low spot. Left alone, the rocking grinds the paver’s edges against its neighbors and spreads the failure.
- A border or edge course has settled below the field. Edge restraint has loosened, letting the border sink and the field pavers creep outward. This is the single most common Jerith hardscape failure we’re called out for.
- Chips or spalls on the corners where tires cross. Point-loading from turning vehicles, made worse by our freeze-free but sun-baked climate that ages the surface faster than in cooler regions. A chipped corner is cosmetic until water gets behind it, then it isn’t.
- Weeds pushing up through the joints. The polymeric sand has eroded, opening gaps that let seed in. Re-sanding is a real fix, but only after we confirm the base is still sound.
- Standing water or a persistent damp patch after rain. The base has lost its slope or compacted unevenly, so water pools instead of draining off. That’s a base problem, not a paver problem, and it needs to be addressed at the source.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
What you’ll pay depends on scope. A handful of individual paver replacements sits at the low end of a line-item quote, while a full Jerith paver driveway installation in Enterprise runs $7,000 – $18,000 depending on square footage, base prep, and pattern complexity. If the base needs rebuilding rather than spot repair, that’s the biggest single driver of the range.
Every quote we give is a written, line-item price delivered before any work starts, so you can see parts and labor split out rather than buried in one number:

- Replacement paver or border pieces (OEM or quality equivalent): priced per piece, shown as a line item.
- Base prep and re-compaction where the failure started underneath: the largest variable.
- Polymeric sand and joint finishing to seal the repair.
- Edge restraint repair or replacement where the border has moved.
The work carries our 365-Day Done Right Promise: if the installation isn’t right within 365 days of the completion date, we make it right at no cost to you. If a repair fails, we come back free, no dispute process required.
DIY or Call Us?
There’s a safe middle ground here. You can absolutely inspect your own driveway: walk the edges and press on any paver that rocks, check whether the border sits flush with the field, and note where water pools after a rain. Those observations help us quote accurately and they cost you nothing.
Where DIY goes wrong is the base. Lifting pavers, re-grading, and re-compacting by hand looks simple and rarely stays put, especially on an Enterprise drive that bakes in summer heat and takes monsoon runoff. A paver that’s reset without a properly compacted base will rock again within a season, and then you’ve paid twice. If the failure is a single loose field paver, it’s a judgment call; if the border has moved or water is pooling, that’s base work and it belongs with a trained crew. Call (844) 797-6157 and we’ll tell you honestly which category you’re in before anyone schedules a visit.
FAQs

How long do Jerith pavers last in Enterprise? A properly installed Jerith paver driveway can hold up for decades, but the paver isn’t usually what fails first in our climate. The base and the joint sand underneath do, because summer heat and monsoon runoff work on them year after year. Keeping joints filled and watching the edge restraint is what protects the lifespan.
Can it be repaired instead of replaced? Yes, often. A single rocking paver or a settled border course can frequently be reset and re-sanded rather than replaced, provided the base beneath it is still sound. We’ll tell you which is the honest answer after we see it. Call (844) 797-6157 for a free estimate and we’ll give you a written line-item quote either way.
How long does the swap take? Individual paver and border replacements are usually a short project, often completed in a single visit; a larger area or a base rebuild takes longer and we’ll give you a realistic timeline up front. What it won’t be is padded to sell you work you don’t need. Call (844) 797-6157 and we’ll scope it with you.
How do you source the Jerith part for my specific model? We identify your paver’s profile, thickness, and color family from photos and measurements, then source the closest OEM or quality-equivalent match and compare the surface texture before ordering. Because Jerith’s finish names have varied across production runs, we confirm the actual look rather than going by the name alone. Call (844) 797-6157 for a free estimate and estimates are free.
When you’re ready to price it, call (844) 797-6157 for a free estimate. You’ll get a written price before any work starts, a live person on the line any time of day or night, and a crew that’s background-checked, identity-verified, and introduced to you by name and photo before they reach your door under The Threshold Standard. We also service KraftMaid, Cambria, and Silestone products on other projects for Enterprise homeowners.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












