







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Home Additions & ADU: The Enterprise Owner’s Guide
We build and finish Jerith-compatible home additions and ADUs across Enterprise, with installed projects typically landing between $45,000 and $130,000 for an addition and $90,000 to $220,000 for a full ADU. That range covers design support, permits, framing, envelope, and finish work; the number that matters for your property depends on size, foundation, and how much of the existing structure we tie into. Enterprise homeowners usually come to this page mid-project, after a remodeler stalled out or a contractor walked the addition and never returned a written price. If that’s where you are, the guide below tells you what to expect, what drives the cost, and what a finished ADU or addition should include.

Key Takeaways
- Additions in Enterprise run $45,000 to $130,000 installed; full ADUs run $90,000 to $220,000.
- A written price is delivered before any work starts, on every project. It is standard, not an upgrade.
- Every crew member is background-checked, identity-verified, and introduced by name and photo before the visit under The Threshold Standard.
- The 365-Day Done Right Promise covers the work for 365 days from the completion date.
- A live person answers the phone around the clock. Call (844) 797-6157.
Which Jerith Models This Applies To

Jerith builds modular and panelized addition and ADU systems, and the part that matters most on a failing project is usually the connection between the module envelope and the site-built structure: the sill, the flashing set, the panel spline, or the trim clips. Identifying your model starts at the data plate. Jerith stamps a series and model code on the interior of each panel and on the documentation packet that ships with the unit. Take a photograph of that plate before you call anyone, including us.
The compatibility gotcha: Jerith changed profile dimensions between series over the years, so a panel spline or flashing set that fits one series will not seat on another. Measuring the panel width to the nearest 1/16 inch and the profile depth is the only reliable way to confirm. When we quote, we specify OEM-equivalent parts sourced to your model code, not a generic aftermarket substitute sold as “universal.” Aftermarket equivalents exist and can be a legitimate cost saver on trim and hardware, but the structural connection parts should match your series exactly.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Home Additions & ADU Is Failing
Jerith systems hold up well, but the desert works on them. Enterprise summers push 105°F and beyond, and the swing between a July afternoon and a January morning runs close to 50 degrees. That thermal cycling is what usually sets failure in motion. The symptoms to watch for:
- Daylight or a draft at the panel seam. The spline or gasket has compressed or cracked from heat cycling. If you can see light, the envelope is open.
- Water staining at the sill or header. Flashing has lifted or the sealant has aged out. In Enterprise, monsoon season finds these gaps fast.
- Rust streaks or white chalky residue on fasteners. The hardware has given up. Inland heat and dry air accelerate sealant and fastener degradation.
- Sticking doors or windows in the addition. The frame or panel has shifted, often because a corner connection loosened.
- Visible deflection or a soft floor near the connection to the main house. The sill or ledger has failed. This is the most serious symptom and should be looked at before it gets worse.
Each of these has a cause, and the cause decides the fix. A compressed gasket is a parts swap. A failing sill is structural work.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here is how the numbers break down for Enterprise projects:
| Project | Installed Range (Enterprise) |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What drives the range: square footage, foundation type, how much of the existing structure we tie into, electrical and plumbing runs, and finish level. A garage conversion sits at the lower end because the shell and foundation already exist.
Parts-plus-labor is quoted separately and transparently. The written price is delivered before any work starts, on every project, every time. There’s no verbal estimate that grows on the final bill. Every completed project is covered by a written guarantee with clear terms, and the 365-Day Done Right Promise covers the work for 365 days from the completion date. If a repair or installation fails inside that window, we come back at no charge. Call (844) 797-6157 for an exact quote on your addition or ADU.
DIY or Call Us?
Some things you can safely check yourself. Inspect seals and flashing for daylight or staining. Photograph the model data plate. Note where water or air is getting in. Measure panel widths. That information helps us quote accurately.
What you shouldn’t do yourself: resealing the envelope, replacing connection hardware, or attempting structural repairs on the sill, ledger, or panel spline. Structural connections carry the load of the addition. A repair done without proper fastening and flashing can let water into the framing, and by the time you see it, the repair is far bigger than the original part. That is a real risk in Enterprise’s heat and monsoon cycles. If the symptom is deflection, daylight at a seam, or water inside, call us. We’ll send a background-checked, identity-verified technician under The Threshold Standard; you’ll have their name and photo before they arrive and see their photo ID badge at the door. Call (844) 797-6157 to schedule a free estimate.
FAQs

A properly built Jerith addition should serve 30 to 50 years, but the sealant, flashing, and hardware need attention every 8 to 12 years in our climate. Enterprise’s intense summer heat and dry air age sealants faster than coastal climates. Re-inspecting the envelope every few years is what keeps the structure behind it healthy. Call (844) 797-6157 to schedule an assessment.
Often yes. Compressed gaskets, aging sealant, and worn hardware can be repaired or replaced without touching the structure. Structural failures at the sill or ledger need to be evaluated before we can say. We diagnose the cause first, then quote the honest fix. Estimates are free.
A gasket or hardware swap is usually a single visit. A flashing or spline replacement typically runs one to two days depending on access. Structural repairs get quoted on their own timeline after inspection. Call (844) 797-6157 for a schedule that fits your project.
We source to your model code, read off the data plate, not from a generic listing. That’s how we avoid the fitment problems that come from profile changes between series. When an OEM-equivalent isn’t available, we tell you what the aftermarket option is and what it doesn’t cover. We’re an independent service provider and not affiliated with Jerith, so we source parts on your behalf and quote what we find.
Mason Remodeling Enterprise also works with KraftMaid cabinetry, Cambria and Silestone surfaces on the interior finishes that complete an addition.
When you call (844) 797-6157, a live person answers, day or night, and you’ll get a written price before any work begins. Your addition or ADU in Enterprise deserves a finish that lasts. Let’s get it right.
Written by the team at Mason Remodeling Enterprise.












