







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Driveway & Pavers: The Enterprise Owner’s Guide
Tremron paver driveways here start around $7,000 for a single-car apron and run to $18,000 for a full two-car driveway with border courses and a bullnose edge. Most of that work completes in 2 to 4 days, weather permitting. We’re an independent installer, not affiliated with Tremron, and we work with the full line of Tremron pavers sold across the Las Vegas Valley.

Owners in Enterprise usually find us one of two ways. Either a paver has heaved at a corner and they’ve tripped on it walking to the mailbox, or the sand between pavers has washed out for the third summer running and the joints look like gravel instead of a finished surface. Both point to the same underlying question: is the base still good, or is the whole field coming up?
Key Takeaways
- Installed Tremron driveway pricing in Enterprise runs $7,000 to $18,000 depending on square footage, base depth, and border detail.
- Most failures we see in Enterprise trace back to base prep, not the pavers themselves.
- Polymeric sand joint loss and corner heave are the two things to check first.
- We quote the whole job in writing before any work starts, and the 365-Day Done Right Promise covers the install for a full year.
Which Tremron Models This Applies To

Tremron stamps its pavers with a mold mark on the bottom face. Flip a loose one over and you’ll usually see a raised letter code plus the mold cavity number. That code, not the color name, is what identifies the product line. Color names vary by region and by the year a dye lot was run, so a “Sierra” or “Oakwood” finish from a 2019 build may not match a current batch even though the name is the same.
The three families we install most around Enterprise are the standard 60mm interlocking profiles (Old Town, Plaza, and similar sets), the larger-format 60mm slabs used for modern driveways, and the 80mm heavy-duty profiles for driveways with regular truck traffic. Mixing a 60mm paver into a 80mm field creates a lip that will catch a shoe or a tire – this is the compatibility mistake we correct most often. If you’re patching a section, measure the thickness with a tape, not by eye.
On the OEM question: there is no “OEM replacement part” for a paver, so the decision is really about matching the manufacturer and mold, not brand loyalty. A matched Tremron paver in the same mold from a nearby lot is the cleanest fix. When the color has been discontinued, we blend a close competitor profile at the edge of the field where the eye reads it as intentional, or we re-lay a full course so the transition falls on a straight line.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Driveway & Pavers Is Failing
- Corners lifting ¼ inch or more. This is base erosion or a root pushing up from below. In Enterprise’s caliche-heavy soil, water pools at the base layer and lifts a paver after a hard monsoon rain.
- Joint sand washing out every summer. Standard sand rinses away; the fix is polymeric sand, which sets like grout. If yours is still plain sand, that’s the first upgrade we recommend.
- Rutting in the wheel paths. Two parallel depressions mean the compacted base wasn’t deep enough for the load. A driveway base in this climate needs 4 to 6 inches of compacted aggregate, not the 2 inches some budget installs leave.
- Pavers rocking when you step on them. A rocking paver has lost its bedding layer. Left alone, the joints around it widen and the sand drains into the void.
- Color fading or efflorescence bloom. The Las Vegas sun bleaches some pigment over 8 to 12 years, and hard water leaves white mineral haze. Efflorescence is cosmetic and cleans up; fading means a sealer or a new field.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s how the numbers land in Enterprise for a Tremron paver driveway, installed:
| Scope | Installed price |
|---|---|
| Full paver driveway install | $7,000 – $18,000 |
| Paver patio install | $3,500 – $11,000 |
| Driveway replacement (remove old, re-lay) | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
The range is driven by square footage, base excavation depth, whether curbs and edge restraints are needed, and trim detail like a soldier course or bullnose cap. Materials are broken out as a line item, and labor is broken out separately, so you can see what the pavers cost versus the prep. The written price we give you is the price on the final invoice. If we find unexpected caliche or a failed base layer once we open up the driveway, we stop and quote the change in writing before we proceed.
Work is covered by a written guarantee for 365 days from the completion date, with the coverage terms stated plainly on the contract.
DIY or Call Us?
You can safely lift a loose paver, measure its thickness, and check the base underneath. Sweeping polymeric sand into open joints is a reasonable weekend job for a small repair. What fails for most owners is compaction: a hand tamper will not get a base to the density it needs, and an under-compacted base is exactly why the paver heaved in the first place. You re-set the paver, it looks fine, and six months later it lifts again.
If more than a handful of pavers have moved, or the base has rutted, the fix is a re-lay with proper excavation and plate compaction, and that’s beyond what a homeowner should tackle on a driveway. Our technicians have up to 22 years of experience and every crew member is background-checked and identity-verified under The Threshold Standard. You’ll get their name and photo before the visit and a photo ID badge at the door. Call (844) 797-6157 for a free estimate.
FAQs

How long do Tremron pavers last in Enterprise? A properly installed Tremron driveway lasts 25 to 30 years or more in this climate. The pavers themselves hold up well to sun and heat; the base and joint sand are what decide the actual lifespan.
Can a failed section be repaired instead of replaced? Yes, if the base under the failed area is still intact. We lift the affected pavers, re-bed and re-compact the base, and relay the same field. If the base has failed, patching over it only buys time. Call (844) 797-6157 and we’ll tell you which one you’re looking at.
How long does a replacement take? A partial re-lay is typically a single day. A full driveway replacement runs 2 to 4 days, depending on square footage and whether old material needs hauling out. Estimates are free.
How do you source the matching Tremron paver? We order through Tremron’s regional distribution and match your mold code and current dye lot. When a color has been discontinued, we source a close profile or re-lay a full course so the transition is invisible. Call (844) 797-6157 for an exact quote on your driveway – estimates are free.
We also work with KraftMaid, Cambria, and Silestone on interior projects if you’re touching the house at the same time.
Call (844) 797-6157 to schedule your free estimate. A live person answers every call, around the clock, every day of the year. You’ll get a written price before any work starts, and a crew whose names and photos you see beforehand. No surprise invoices, no verbal estimates that grow on the final bill.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












