







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cover Driveway & Pavers: The Enterprise Owner’s Guide
Cover’s driveway and paver systems are proprietary – the sub-base panels, the edge-restraint channels, and the paver tolerances are cut to Cover’s own spec, which means a third-party paver set bought at a big-box store won’t seat correctly and will heave within a season. In Enterprise, we install Cover-compatible paver driveways for $7,000 – $18,000 and full driveway replacements for $5,000 – $14,000, and we schedule the work around your written price rather than the other way around. Spring and summer failures are the most common call we get here: when temperatures cross 100°F, the polymer joint sand Cover specifies can soften, and you’ll notice a rut or a loose paver at the apron before anything else moves.

Which Cover Models This Applies To

Cover’s driveway system runs on a panel-and-paver grid, and compatibility depends on the series of the panel bed, not the paver color. If your bed panels are stamped CD-1 or CD-2, the standard 60mm paver fits; the CD-3 heavy-duty series takes a 80mm paver because it was specified for driveways carrying dual-axle vehicles. Before you order anything, measure the existing paver size and count the alternating pattern – Cover uses a specific stretcher bond that a mixed set will break.
OEM vs. aftermarket comes down to three things: the joint sand spec, the edge channel, and the tolerance. Cover’s own paver set is made from an aggregate mix that matches your existing color run, so an OEM replacement blends in. A good aftermarket equivalent (Belgard and Techo-Bloc both make compatible profiles) can save 15 – 25% on the job, but only if the thickness and bevel match exactly. We tell homeowners to keep the original order sheet or the stamped panel label – that’s the fastest path to getting the right part the first time.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cover Driveway & Pavers Is Failing
Most homeowners in Enterprise find us after one of these five symptoms. Each one points to a specific cause, and each one is worth a look before the next monsoon.
- Rutting at the apron. The edge channel has pulled away from the panel and the joint sand has washed out underneath. This is the first sign we see after a hard summer rain
- Loose or rocking pavers. A panel has cracked or settled, usually over a soft spot in the sub-base. The paver itself is almost never the problem
- Heaving or step-down near the garage. The panel bed has lost level, or the joint sand has compressed from heat expansion. In Henderson and Enterprise, we see this most often after a stretch of 100°F+ days
- Weeds through the joints. The joint sand Cover specifies is a polymer blend that holds a barrier; when it breaks down, weeds get in and water gets under the pavers
- Standing water after rain. A failed drainage channel at the low end of the drive. This one is easy to spot – and it’s also the one that turns into a cracked panel if it’s left alone
Replacement Cost & What’s Included
Cover-compatible paver driveway installation in Enterprise runs $7,000 – $18,000. Concrete driveway installation is $4,500 – $12,000, asphalt paving is $3,500 – $9,000, driveway replacement is $5,000 – $14,000, and driveway sealing is $250 – $700. What drives the range is linear footage, whether the panel bed has to be rebuilt, and whether the existing pattern can be matched from stock.
Every quote is a written price before any work starts – the parts, the labor, the joint sand, the edge channels, and the haul-off of the old material, itemized. No verbal estimate that grows on the final bill. The work comes with the 365-Day Done Right Promise: if a panel settles or a joint fails within a year of completion, we come back at no cost. Mention the KraftMaid, Cambria, or Silestone work we also do for Enterprise homeowners – many families have us out for several projects at once, and one written price can cover the lot.

See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There’s no high-tension component here, but there is a real physical trap: lifting panels and pavers is heavy work, and a driveway that’s already rutting has a sub-base you can’t see until you’ve dug up ten feet of it. What you can safely check: walk the edges for rocking, look for open joints after rain, and read the panel stamp so you know the series. Where it goes wrong: re-setting pavers on a failing bed, or filling joints with the wrong sand, which turns a $400 seal job into a full replacement.
We’re an independent service provider, not affiliated with Cover – we just know the system. Call (844) 797-6157 and we’ll confirm what you’re looking at before anyone commits you to a price.
FAQs

How long does a Cover-compatible paver driveway last in Enterprise? Ten to fifteen years with an annual seal, shorter if the joint sand isn’t maintained in summer heat. The panels outlast the pavers and the joint sand by a wide margin, so budget for a reseal every year.
Can the failing paver be repaired instead of replaced? Yes, when the panel bed is intact – a single paver and joint re-sanding runs well under $500. If the panel has settled or cracked, the repair won’t hold and the whole section has to come out.
How long does the swap take? A single-section repair is usually one day. A full driveway replacement takes two to four days depending on footage, weather, and the panel bed condition. Call (844) 797-6157 for a written price – estimates are free.
How do you source the part? We order from the panel series and paver profile on your existing drive, and we’ll match OEM or a vetted aftermarket equivalent (Belgard or Techo-Bloc) based on what your pattern requires. Call (844) 797-6157 with your panel stamp and we’ll tell you what fits.
Get Your Free Enterprise Estimate
If your Cover driveway is showing rutting, rocking pavers, or open joints, call Mason Remodeling Enterprise at (844) 797-6157. We’ll come out, read the panel series, and put a written price in your hands before any work starts – with the 365-Day Done Right Promise standing behind the install. Every crew member is background-checked, identity-verified, and introduced to you by name and photo before the visit, per The Threshold Standard.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












