A Mason company - serving Enterprise, NV
A new rear addition with a vaulted beamed ceiling and tall windows
Dvele · Enterprise

Dvele Windows & Doors in Enterprise, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Enterprise
A garage converted into a guest room and home office
A finished backyard cottage with a small covered porch
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
An open living space after a whole-home remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A remodeled living room with built-in shelves around the fireplace
An open kitchen and dining area after a remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Dvele Windows & Doors: The Enterprise Owner’s Guide

We install Dvele-compatible windows and doors for Enterprise homeowners, with most full window replacements running $4,500 to $15,000 installed and impact-rated units at $8,000 to $25,000. A single failed sash, hinge, or seal repair is a smaller job, and we quote it in writing before we touch anything. Mason Remodeling Enterprise is an independent service provider and is not affiliated with Dvele.

Contractors performing professional bathroom vanity and mirror installation in Enterprise, NV

Call (844) 797-6157

Owners usually discover the failure in one of two ways. Either a door starts dragging on the threshold in July and won’t latch by August, or a window that sealed fine last winter now whistles during a dust storm and leaves a fine grit line on the sill. Enterprise sits in a high-desert climate with big day-night temperature swings and wind-driven dust, and Dvele’s tight-frame construction means a small seal or hardware failure shows up fast, because there’s no slack in the system to hide it.

Which Dvele Models This Applies To

A second-story addition that matches the existing roofline

Dvele builds modular homes across several plan lines, and the window and door package varies by model and by the year the module was built. The three things that decide whether a part fits are the frame series, the rough opening dimension, and the glazing package. A window that looks identical to yours can use a different sash profile if it came from a different production batch.

Start by finding the manufacturer label on the frame, usually on the jamb head or the sash edge. It lists the series and the size code. Then measure the actual rough opening in three places, top, middle, and bottom, because modular frames can be slightly out of square after transport and set. Write those numbers down; they’re the difference between a part that fits and a return.

On the OEM versus aftermarket question, Dvele-specific parts are the safe match for anything structural: sash assemblies, hinge sets, and the door threshold. For wear items like weatherstripping, rollers, and seals, a quality aftermarket equivalent is often better and cheaper, because the seal compounds sold for desert climates outperform a standard OEM strip. We’ll tell you which is which on your quote. We also service KraftMaid, Cambria, and Silestone products in Enterprise homes.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Dvele Windows & Doors Is Failing

  • Doors that stick or drag in summer. Thermal expansion pushes a slightly out-of-adjustment frame against the slab, so the door binds when it’s hot and swings free when it’s cool. The hinge set or the threshold is usually the culprit, not the door itself.
  • Draft or dust at the frame edges. A failed weather seal lets wind-driven dust through in Enterprise, and you’ll see a faint line of grit on the sill or floor. Once the seal compresses and stays compressed, it won’t recover.
  • Fogging between the panes. That’s a broken seal in the insulated glass unit, not condensation on the room side. The glazing has to be replaced as a unit; there’s no repair for a failed IG seal.
  • Hardware that won’t latch or lock. Rollers, strikes, and latch plates wear faster in dusty air. If the door or window won’t lock cleanly, the alignment is off and the hardware is worn.
  • Water staining or soft wood at the sill. This is the one to act on. A failed sill seal lets monsoon rain in, and in Enterprise the damage shows up as staining before it shows up as rot.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Footing forms with tied rebar for a home addition

For Enterprise, a standard window replacement runs $4,500 to $15,000 for a whole-home package, and impact-rated window installation runs $8,000 to $25,000. A single window or door part swap sits well inside those ranges, usually the low end, because labor is a few hours and the part is the main cost. What drives the number is the part itself, the series, the glazing package, and how much frame work the install needs.

Our quotes are line-item: part cost, labor, and any trim or sealant, with the price written before any work starts. Every job carries the 365-Day Done Right Promise, which means if the work isn’t right within 365 days of completion, Mason Remodeling makes it right at no cost. A live person answers every call, 24 hours a day, every day of the year, and you’ll get the technician’s name and photo before the visit, plus a photo ID badge at the door.

DIY or Call Us?

You can safely check a few things yourself: measure the rough opening, read the label for the series code, and clear dust from the tracks and weep holes with a vacuum and a soft brush. Tightening a loose hinge screw is fine. Adjusting a roller is fine if you go a quarter turn at a time.

What goes wrong is the part that needs the frame opened up. Replacing a sash, re-setting a threshold, or swapping a glazing unit requires the door or window to come off its track and be re-squared, and if the frame is carrying any load, working it wrong can crack the glass or leave the unit permanently out of alignment. This isn’t a job to improvise on a Dvele frame, where tolerances are tight. Call (844) 797-6157 and we’ll tell you honestly whether it’s a part swap or a repair.

FAQs

A room opened to the studs with new wiring and plumbing

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled primary suite with built-in wardrobes and a window seatNew painted shaker cabinets with an organized deep drawerA remodeled hall bathroom with patterned floor tile and painted wallsA remodeled staircase with wood treads and a slim metal railingA small remodeled galley kitchen with cabinets to the ceilingA low-threshold walk-in shower with a bench and grab bar

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Enterprise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Enterprise team

A local vetted partner works across Enterprise and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-6157
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Mason Remodeling Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch