







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Kitchen Remodeling: The Enterprise Owner’s Guide
A Mighty Buildings kitchen remodel in Enterprise typically runs $14,000 to $45,000 installed, and small-scope projects land between $9,000 and $20,000. We handle the full scope: cabinetry, counters, backsplash, island, and the plumbing and electrical tie-ins that a prefab panelized home requires. Estimates are free and we give you a written price before any work starts. Most Enterprise owners call us after a walkthrough turns up something the original install hid: a cabinet run that no longer sits square to the wall panel, a counter seam lifting near the sink, or a backsplash that cracked within a year of the build. In panelized construction those failures tend to show up all at once, and they point back to how the factory modules met the site-built kitchen.

Which Mighty Buildings Models This Applies To

Mighty Buildings built its name on 3D-printed and panelized units, and its single-family lines share a common trait that matters for a kitchen: the module walls and floor deck are set by the factory, not by a site framer. That means cabinet runs, appliance openings, and counter depths have to be measured against the actual panel face, not a stud wall. Before anyone orders a cabinet, measure the interior clear width at three points (top, middle, bottom of the run) and check the wall for the printed surface texture. A run that measures 1/4 inch out of plumb will not accept a standard box cabinet cleanly, and we correct for it with a scribe or filler rather than forcing the box.
Identifying your unit: look for the data plate inside the electrical panel door or on the module frame near the utility chase. It lists the model and module serial. Photograph it. That plate is how we confirm which interior finish package your kitchen shipped with, which decides whether the OEM replacement cabinet or a professional-grade equivalent like KraftMaid or Wellborn lines up with the existing reveal.
OEM versus aftermarket for Mighty Buildings: OEM boxes carry the exact factory footprint. Aftermarket equivalents from a professional cabinet line usually cost less and offer far more door style and finish choice, but they need the module wall measured and shimmed to match. We are an independent service provider, not affiliated with Mighty Buildings, so we make that call from your measurements, not a parts catalog.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mighty Buildings Kitchen Remodeling Is Failing
- Cabinet doors rubbing or sagging along one run. The module wall has settled a fraction and the hinge plates no longer align. This is the first thing Enterprise owners notice because it happens within the first two summers.
- Counter seam lifting or pulling away near the sink or cooktop. Heat and the desert temperature swing expand the substrate faster than the seam adhesive moves, and a seam that sat flush at build opens a hairline over time.
- Caulk lines at the panel-to-cabinet joint cracking. The printed wall surface and the wood cabinet expand at different rates. A flexible sealant fails where a rigid joint was used.
- Backsplash tile or slab cracking at the corner joints. Grout and thin-set bond rigidly; the module corner flexes just enough to crack a joint that was never given a movement gap.
- Island rocking or a floor squeak under the island. The floor deck at the island footprint was not re-leveled after the module was set, so the island floats on high spots.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for Enterprise, parts and labor together:
- Full kitchen remodel: $14,000 – $45,000
- Small kitchen remodel: $9,000 – $20,000
- Cabinet installation: $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
What drives the range: how far out of plumb the module wall measures, whether the electrical and plumbing chases need to be reworked behind the cabinets, and your surface choice. A quartz or natural stone top from Cambria, Silestone, or Caesarstone sits near the top of the counter range; laminate lands low. Every project gets a written, line-item price before we start, so parts and labor are separated and you can see exactly what each line costs. Our workmanship is covered for 365 days from the completion date, stated plainly in writing, with a free return visit if an installation fails.

DIY or Call Us?
You can safely check a few things yourself. Photograph the data plate. Measure the cabinet run width at three heights and write the numbers down. Note where the caulk is cracking. Pull one drawer and look at the hinge plate for a maker’s mark. That information shortens the estimate.
What you should not take on: reworking plumbing or electrical behind a cabinet run, moving a gas line for an island or cooktop, or forcing a cabinet box onto a wall that is out of plumb. Those carry real injury and code risk, and a mistake inside a panelized wall is expensive to open back up. Cabinet boxes, counters, and tile work we handle. Call (844) 797-6157 and we’ll walk the kitchen with you and give you a written price before anything is ordered.
FAQs

How long does a Mighty Buildings kitchen remodel last before it needs redoing? Expect 15 to 20 years from cabinets and counters if the module wall was properly shimmed at the first install; a forced or unshimmed install shortens that to 8 to 12. The seam and caulk failures above are the early warning. Call (844) 797-6157 for an exact quote on the repair scope; estimates are free.
Can the cabinet or counter be repaired instead of replaced? Often yes. Sagging doors usually need new hinges and a shim, not a new box. A lifting counter seam can sometimes be re-bonded if the substrate is sound. We look at the joint before recommending replacement. Call (844) 797-6157 and we’ll tell you honestly which way it goes.
How long does the swap take? A cabinet run replacement is typically a few days; a full kitchen with counters and backsplash runs one to two weeks depending on scope and material lead times. We schedule around your household, and the written timeline comes with the written price. Call for a free estimate.
How do you source the part for my Mighty Buildings unit? We start from the data plate and your measurements, then match either the OEM cabinet footprint or a professional-grade equivalent. We don’t claim to stock Mighty Buildings parts or carry them on a truck; we confirm fit against your specific module before ordering, and we put the sourcing line in writing. Call (844) 797-6157 to schedule your free estimate.
We also service KraftMaid, Cambria, and Silestone installations in Enterprise. Every crew member is background-checked and identity-verified under The Threshold Standard, and you receive the technician’s name and photo before the visit, plus a photo ID badge at the door. Every project comes with a written price before any work starts and a 365-Day Done Right Promise. Call (844) 797-6157 for a free estimate in Enterprise and nearby areas.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












