A Mason company - serving Enterprise, NV
A remodeled primary bathroom with a soaking tub and a walk-in shower
Mighty Buildings · Enterprise

Mighty Buildings Bathroom Remodeling in Enterprise, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Enterprise
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A remodeled living room with built-in shelves around the fireplace
A single-story rear room addition with tall windows and a new patio
An open kitchen and dining area after a remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mighty Buildings Bathroom Remodeling: The Enterprise Owner’s Guide

We install Mighty Buildings-compatible bathroom remodeling here in Enterprise, and a full bathroom remodel typically runs $9,000 – $28,000 installed, with small bathroom remodels at $5,000 – $12,000. A shower replacement alone lands at $3,000 – $8,500, and a tub-to-shower conversion runs $3,500 – $10,000. Because Mighty Buildings panels are factory-finished, most of the work is in the wet-wall connections, the shower valve, and the floor drain – not in framing.

Professional contractors installing new hardwood flooring in a home renovation project in Enterprise, NV

Call (844) 797-6157

Owners usually discover a problem the same way. A soft spot appears near the shower pan. Grout along the panel seam starts cracking. The caulk around the shower valve body pulls away and water tracks behind it. Or the vanity backsplash shows a faint discoloration that wasn’t there a year ago. In Enterprise, our dry climate hides small leaks until they’ve already damaged the substrate underneath.

Key Takeaways

  • Mighty Buildings bathrooms are factory-panel systems, so the parts you need are specific to the panel series – not the same as a stick-built bath.
  • Installed bathroom remodeling in Enterprise runs $9,000 – $28,000; small bathrooms $5,000 – $12,000.
  • Most failures we see in Enterprise are water intrusion at panel seams and shower valve penetrations, not structural.
  • We’re an independent service provider and are not affiliated with Mighty Buildings.
  • Written price before any work starts, on every project.

Which Mighty Buildings Models This Applies To

A tile setter installing wall tile in a shower

Mighty Buildings built its reputation on 3D-printed and panelized accessory units and homes, and the bathroom components inside those homes are factory-assembled wet-wall panels, not loose tile on backer board. That means the part you need must match the panel series your home was built with. Identifying it takes three things: the model plate (usually inside the utility closet or on the electrical panel door), the panel thickness at the shower surround (many Mighty Buildings wet walls are 4 to 6 inches thick, which changes how a replacement valve body seats), and the drain spacing from the wall (some series use a slightly offset rough-in that a standard shower pan won’t fit).

When you’re deciding OEM versus aftermarket for a Mighty Buildings bathroom, the honest answer is: match the panel system, then choose the fixtures freely. The panels themselves need Mighty Buildings-compatible components. The shower valve, the drain, the vanity, the toilet, and the tile or surface finish can be any professional-grade brand – Kohler, Moen, Toto, Grohe all fit standard rough-ins. Many Enterprise owners pair a Mighty Buildings shell with KraftMaid cabinetry and a Cambria or Silestone top, because those are upgrade parts that don’t fight the factory panel.

One compatibility gotcha we’ve run into: the fasteners. Mighty Buildings panel systems use specific screw types and embed depths in the printed substrate, and standard drywall screws will pull through the panel skin instead of biting. If you’re replacing a shower surround or vanity backsplash, use the specified fastener or the panel will fail at the seam within a season.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mighty Buildings Bathroom Remodeling Is Failing

Bathrooms fail slowly and then all at once. Here’s what we see when we get called to a Mighty Buildings bathroom in Enterprise:

  • Soft or spongy floor near the shower pan. Water has been tracking under the pan for weeks. The pan seal failed, or the drain gasket loosened, and the subfloor is absorbing it.
  • Grout or caulk cracking at panel seams. The panel has shifted slightly, usually from thermal movement or a fastener that backed out. That crack is now a water path.
  • Discoloration on the vanity backsplash or drywall below the shower valve. The valve body penetration wasn’t sealed correctly. Water is wicking behind the finish.
  • Shower valve hard to turn or dripping when off. The cartridge is worn. In Enterprise’s hard water, mineral scale accelerates cartridge wear, and we see failures sooner than in softer-water markets.
  • Loose tile, hollow-sounding floor tile, or a lifting threshold. The thinset has debonded, often from moisture under the tile or a deflection issue in the subfloor.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A finished basement family room with a media wall and wet bar

For a Mighty Buildings bathroom in Enterprise, here’s where the numbers land:

Scope Installed Price Range
Full bathroom remodel $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement $3,000 – $8,500
Bathroom vanity installation $800 – $3,000

What drives the range: how much of the Mighty Buildings panel gets replaced versus repaired, whether the drain has to be reset or relocated, the finish level you choose, and whether there’s water damage in the substrate. A vanity swap is a $800 – $3,000 job. A shower pan that failed and soaked the subfloor is closer to the top of the shower-replacement range, because we’re removing and rebuilding the base.

Every price is written, line-itemed, and delivered before a tool comes out of the case. No verbal estimates that grow. Our work carries the 365-Day Done Right Promise: if something we installed isn’t right within 365 days of completion, we come back and fix it at no cost. Parts are sourced specifically for your panel series; we don’t carry Mighty Buildings parts on a truck, so the lead time for a specific panel component is usually a few business days, and standard fixtures are off the shelf.

DIY or Call Us?

Here’s the honest split. What you can safely check yourself: look for soft spots in the floor near the shower with your hand, check the caulk line at the shower valve and panel seams, watch the water meter with all fixtures off to see if anything is running, and look at the model plate. What you should not do yourself: pull the shower valve cartridge out of a live water line, replace a shower pan, or reset a floor drain. A failed shower valve body can release scalding water under 60 psi, and a badly removed pan can dump water into the wall cavity in seconds. If you see water where water shouldn’t be, stop and call.

Give us a call at (844) 797-6157. We’ll ask you to read the model plate, we’ll tell you what’s likely failing, and we’ll give you a written price before anyone shows up. A live person answers, day or night.

FAQs

A walk-in pantry with wood shelving

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled primary suite with built-in wardrobes and a window seatA garage converted into a guest room and home officeNew painted shaker cabinets with an organized deep drawerA remodeled staircase with wood treads and a slim metal railingA small remodeled galley kitchen with cabinets to the ceiling

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Enterprise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Enterprise team

A local vetted partner works across Enterprise and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-6157
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Mason Remodeling Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch