A Mason company - serving Enterprise, NV
An open living room and dining area after a whole-home remodel
Ameristar · Enterprise

Ameristar Fence Installation in Enterprise, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Enterprise
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
An open living space after a whole-home remodel
A remodeled living room with built-in shelves around the fireplace
A wide opening with a new beam where the kitchen wall was removed
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled hall bathroom with subway tile and a floating vanity
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Ameristar Fence Installation: The Enterprise Owner’s Guide

Ameristar fence installation in Enterprise typically runs $3,500 – $9,000 for a standard residential run, and most projects are scheduled within a few days of the estimate. Ameristar makes welded steel and aluminum ornamental fencing – the kind you see around a lot of Enterprise HOA lots and pool enclosures – and the failure that brings most owners to this page is a leaning post, a rusted weld at a rail, or a gate that no longer latches because a hinge plate tore free. The fence usually looks fine at a glance. Then a wind gust in March bends a post cap back and the whole panel shifts.

Professional contractor installing a kitchen countertop during a home remodel in Enterprise, NV

Call (844) 797-6157

We install Ameristar-compatible fencing across Enterprise. We’re an independent contractor and not affiliated with Ameristar – we source the product and put it in the ground the way the manufacturer specifies for Southern Nevada soil.

Key takeaways

  • Standard Ameristar installation in Enterprise: $3,500 – $9,000.
  • Most failures trace back to post footings, not the panels themselves.
  • Powder coat and welds hold up in our heat; ground movement is what breaks fences here.
  • Every job gets a written price before work starts and a 365-Day Done Right Promise.

Which Ameristar Models This Applies To

A finished basement family room with a media wall and wet bar

Ameristar makes several ornamental fence lines – Concord, Montage, and the aluminum residential series most common on Enterprise properties. They use different rail profiles and post sizes, and the hardware is not interchangeable between them. A 2-inch post cap for a Montage post won’t seat on a Concord post, and gate hinges for one series often have a different bolt spacing than another.

The fastest way to identify what you have is to measure the post. Ameristar ornamental posts generally run 2 inches, 2.5 inches, or 3 inches square depending on the series and whether it’s a line post, corner post, or end post. Check the inside of a post cap or the underside of a rail for a stamped model code. If the cap is welded shut, measure post width and rail height with a tape and photograph both before you call.

On the OEM-versus-aftermarket decision: for structural parts – posts, rails, hinges – we use Ameristar-spec or a verified equivalent, because the gauge and coating have to match or the part fails early. For caps and finials, a quality aftermarket piece is often fine and costs less. We’ll tell you which camp a part falls into rather than pushing OEM across the board.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Ameristar Fence Installation Is Failing

Most Ameristar problems show up as symptoms in the posts and hardware long before a panel actually comes down. These are the ones we see most in Enterprise:

  • Posts leaning or tilting. Usually a footing that was set too shallow or in soil that wasn’t compacted. Enterprise’s caliche layer and the shrink-swell clay in older neighborhoods both push posts out of plumb over time.
  • Rust at the weld joints. The powder coat can chip at a weld from flexing, and once bare steel is exposed, our dry heat doesn’t stop the corrosion – it just slows it. A brown streak at a rail-to-post joint is the first sign.
  • Gate sagging or dragging. A hinge plate pulling loose from the post, or a post that’s tilted slightly out of plumb. Gates carry more load than panels and fail first.
  • Loose or missing fasteners. Self-tapping screws back out of aluminum over years of thermal expansion. You’ll find them on the ground near the fence line after a hot summer.
  • Panels racking out of square. When a post moves even an inch, the whole panel between it and the next post distorts. This is a footing problem, not a panel problem.

Replacement Cost & What’s Included

A walk-in pantry with wood shelving

Ameristar-compatible fence installation in Enterprise runs $3,500 – $9,000. The range is driven by linear footage, fence height, number of gates, and – the big one – how much old fence and old footing has to come out before new posts go in.

  • Removal and disposal of old fence: adds $400 – $900 depending on run length and whether old concrete footings need breaking out.
  • New post footings: concrete-set posts at code depth. This is the part that determines whether the fence stands straight in ten years.
  • Panels, rails, posts, and hardware: Ameristar-spec or verified equivalent material.
  • Gate installation and adjustment: hung, latched, and swing-tested before we leave.

Every project gets a written, line-item price before a single tool is unpacked – no verbal estimates, no surprise invoices. The work is covered by the 365-Day Done Right Promise: if something we installed isn’t right within 365 days of the completion date, we come back and make it right at no cost.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely check a lot of this yourself. Walk the fence line and look for lean with a level. Photograph the model code inside a post cap. Tighten a loose gate hinge with a screwdriver. Pull a fence panel back into place to see if the post is what’s actually moving. That tells you whether you have a hardware problem or a footing problem.

Where DIY goes wrong is the footing. Setting a post in Enterprise soil without proper depth, drainage, and compaction is the reason most fences fail here in the first place. Digging out a failed footing is also more work than most homeowners expect once you hit that caliche layer. And any work involving a heavy panel or a full-height gate on your own is a two-person job with a real risk of a panel coming down on someone.

If you’re not sure what you’re looking at, call (844) 797-6157 – a live person answers every time, day or night, and we’ll help you sort out whether it’s a part you can swap or a post that needs replacing.

FAQs

A powder room with botanical wallpaper and a stone sink

Get Your Ameristar Fence Priced in Enterprise

Whether you’re resetting a dozen posts or replacing the whole run, the next step is the same: a free estimate with a written price before any work starts. Every crew member is background-checked and identity-verified under The Threshold Standard, and you’ll get the technician’s name and photo before the visit plus a photo ID badge at the door. Call (844) 797-6157 to schedule your free estimate – a live person answers 24 hours a day, every day.

Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A galley kitchen opened up to the dining room with a new peninsulaA walk-in shower with large-format tile and a built-in nicheA small remodeled galley kitchen with cabinets to the ceilingA low-threshold walk-in shower with a bench and grab barA remodeled kitchen with a waterfall island and wood cabinetsA wood double vanity with two mirrors after a bathroom remodel

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Enterprise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Enterprise team

A local vetted partner works across Enterprise and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-6157
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Mason Remodeling Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch