







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Kitchen Remodeling: The Enterprise Owner’s Guide
If you own an Ameristar kitchen and a cabinet, countertop, or hardware component has failed, we install Ameristar-compatible replacement parts and full kitchen systems across Enterprise. Most partial kitchen replacements and component upgrades we handle run $14,000 – $45,000 for a full kitchen remodel, with individual part swaps priced much lower. We schedule site assessments quickly and give you a written price before work begins. Most Enterprise owners find us after a drawer slide snaps, a cabinet door hinge pulls loose from the frame, or a countertop seam lifts – small failures that hint at larger wear.

Which Ameristar Models This Applies To
Ameristar cabinetry and kitchen component lines show up in a lot of Enterprise homes built or updated in the 1990s through the 2010s. The label inside the cabinet door or on the back panel tells you the series and the box dimensions. Take a photo of that label before you call anyone – it saves a return trip and prevents ordering the wrong slide or hinge. Ameristar used several hinge bore patterns over the years, and a 35mm cup hinge from one production run will not seat in a 26mm bore from another. Measure the bore diameter and the door overlay before anything gets ordered. On the countertop side, Ameristar used both laminate and solid-surface tops across its lines; the substrate and edge profile differ, which matters if you’re replacing a section rather than the whole top. OEM parts are available for most Ameristar series, but quality aftermarket equivalents often match or exceed the original spec at a lower price. We also work with KraftMaid, Cambria, and Silestone when a homeowner wants to upgrade while replacing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Kitchen Remodeling Is Failing
- Drawer slides that stick or won’t close flush. The nylon rollers inside undermount slides wear flat after years of daily use – in Enterprise’s dry heat, the lubricant dries out faster than in humid climates, accelerating the wear. Once the roller is flat, no amount of adjustment fixes it; the slide needs replacing.
- Cabinet door hinges that sag or pull out of the frame. The screws holding the hinge plate strip out of the particleboard or MDF frame over time. If the hinge itself is bent, the door won’t hang square no matter how tight the screws are. A stripped screw hole is a sign the frame needs reinforcement, not just a longer screw.
- Countertop seams that lift or darken. Laminate seams and solid-surface joints can separate when the substrate swells from a slow leak or from years of heat cycling. A dark line along a seam usually means moisture has gotten under the edge. Left alone, the substrate softens and the top fails.
- Cabinet boxes that rack or separate at the corners. Particleboard boxes glued and stapled at the factory can pull apart when the floor shifts or when heavy items overload a shelf. You’ll see a gap at the corner joint or feel the box flex when you push on it.
- Backsplash tile that pops or grout that crumbles. Tile adhesive loses bond when the drywall behind it moves. In Enterprise, the swing between cool nights and 100-degree days stresses the wall assembly, and grout cracks follow. Loose tile means the substrate needs attention before new tile goes on.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here is what Enterprise homeowners typically pay for Ameristar-compatible kitchen work, parts and labor included:
- Full kitchen remodel: $14,000 – $45,000
- Small kitchen remodel: $9,000 – $20,000
- Cabinet installation: $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
The range depends on cabinet box condition, whether the layout changes, countertop material, and how much of the existing system can be reused. We give you a written price before any work starts – not a verbal estimate that grows on the final bill. Every completed project carries a written guarantee with clear terms, and if a repair or installation fails within 365 days of completion, we return at no charge.
DIY or Call Us?
Some things you can check safely yourself: open a drawer and look at the slide for flat spots or missing rollers; shine a flashlight into a stripped hinge hole to see how much material is gone; press on a cabinet corner to feel for flex. What goes wrong with DIY is replacing a hinge or slide without matching the bore and overlay, which leaves the door sitting crooked, or pulling a countertop section without shutting off the water line to the sink or dishwasher first. If a cabinet box is racked, forcing new hardware into it makes the damage worse. Call us at (844) 797-6157 and we’ll talk through what you’re seeing before you buy a part that won’t fit.

FAQs

Cabinet hardware like slides and hinges usually lasts 10 to 15 years under daily use; cabinet boxes and countertops can go 20 years or more if they stay dry. In Enterprise’s climate, the dry air and temperature swings shorten hardware life a bit, so expect the slides to be the first thing to go.
Sometimes. A stripped hinge screw hole can often be reinforced with a hardwood plug or a cabinet repair plate, and a single slide can be swapped without touching the rest. A cracked countertop seam or a racked cabinet box usually means replacement is the honest answer. We’ll tell you which one it is before you spend anything.
A single slide or hinge swap takes under an hour once the right part is in hand. Cabinet door replacements, countertop sections, or backsplash work typically take a day or more depending on scope. We give you a written timeline with the written price so you know what to expect.
We match the part to the series and bore measurements from your cabinet label, then order OEM where it’s available or a verified equivalent that meets the same spec. We don’t carry parts on a truck and we don’t guess at fit. If the part needs to be ordered, we tell you the lead time up front.
Call (844) 797-6157 for a free estimate on your Ameristar kitchen project in Enterprise. We’ll confirm what’s failing, quote a written price, and get the right part ordered.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












