A Mason company - serving Enterprise, NV
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Atlas · Enterprise

Atlas Kitchen Remodeling in Enterprise, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Enterprise
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A small remodeled galley kitchen with cabinets to the ceiling
A walk-in pantry with wood shelving
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A wide opening with a new beam where the kitchen wall was removed
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Atlas Kitchen Remodeling: The Enterprise Owner’s Guide

Replacing an Atlas cabinet, countertop edge, or island component in Enterprise typically runs $14,000 – $45,000 for a full kitchen remodel, $4,000 – $13,000 for cabinet installation alone, and $2,000 – $6,500 for countertops, with a written price before any work begins. Most Enterprise owners don’t discover a failing Atlas part until a drawer front stops latching, a cabinet box sags off the wall, or a countertop seam opens up and starts trapping water. By then, the small failure has usually spread – a soft hinge tears the door frame, a leaking seam stains the substrate, a warped shelf wears the finish on everything it touches.

Contractors performing professional bathroom vanity and mirror installation in Enterprise, NV

Call (844) 797-6157

Key Takeaways

  • We install Atlas-compatible kitchen cabinetry, surfaces, and islands in Enterprise and surrounding neighborhoods.
  • Installed kitchen remodels here run $14,000 – $45,000; single-component swaps are priced line by line.
  • Every project gets a written price upfront and a 365-Day Done Right Promise.
  • Our technicians have up to 22 years of experience with Atlas and competing cabinet systems.
  • Mason Remodeling Enterprise is an independent service provider, not affiliated with Atlas.

Which Atlas Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Atlas cabinets show up in Enterprise homes in three broad buckets: frameless (full-overlay) boxes, framed boxes with a face-frame lip, and pre-assembled semi-custom runs. The part you need depends entirely on which one you own, and the difference matters more than most homeowners expect. A frameless hinge will not fit a framed cabinet without an adapter plate, and a semi-custom island panel won’t line up on a stock run because the box depth is measured differently.

Find your model and series on the sticker inside the cabinet door, on the back of the drawer box, or on a spec sheet tucked into the toe kick. If those are gone, measure the box opening (interior width, height, and depth), the door overlay, and the hinge cup bore – usually a 35mm bore on Atlas frameless lines, though older runs vary. Match the series before you order.

The OEM-versus-aftermarket call is where Enterprise owners get squeezed. An OEM Atlas door or panel can take weeks to arrive and is priced as a single unit, not as part of a run. A quality aftermarket equivalent in the same overlay and finish can go in faster and often cost 20 – 35% less, but only if the bore and mounting align. We compare the two options side by side for every job and let you decide – no pressure to go one way.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Atlas Kitchen Remodeling Is Failing

Enterprise’s desert swing – dry winters, monsoon humidity in July and August – puts cabinetry and seams through a cycle that wears parts faster than in stable climates. Here’s what to watch for.

  • Drawers that stick or slide crooked. The slide rail has usually worn past tolerance or the box has twisted. In dry months, particle-board gussets shrink and the alignment drifts; it won’t fix itself.
  • Doors that sag or won’t latch. A tired hinge or a stripped screw hole in the frame. Enterprise owners often see this first on upper cabinets over the range, where heat cycles add stress.
  • Countertop seams that darken or lift. Water has worked under the seam and stained the substrate. On stone and quartz, this usually means a failed adhesive bond, not a cracked slab.
  • Cabinet boxes pulling away from the wall. Anchor screws have loosened, usually behind a wall where the stud layout was irregular. Soft wood or drywall behind the screw lets it walk out.
  • Bubbling or peeling finish on lower doors. Moisture from the sink or dishwasher has reached the finish edge. Once it lifts, it spreads.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A single-story rear room addition with tall windows and a new patio

Installed pricing in Enterprise, honest and line-itemed:

Project Installed Range
Full Kitchen Remodel $14,000 – $45,000
Cabinet Installation (Atlas or compatible) $4,000 – $13,000
Countertop Installation $2,000 – $6,500
Backsplash Installation $800 – $2,500
Kitchen Island Installation $3,000 – $10,000
Small Kitchen Remodel $9,000 – $20,000

What moves the number: cabinet line and finish grade, slab selection (Cambria, Silestone, and Caesarstone are our standard surfaces), whether plumbing or electrical needs to move, and access – a second-floor or tight-galley job takes more careful handling than an open-plan run.

Every Enterprise project includes a written price before any work begins, the part and labor broken out separately, and a 365-Day Done Right Promise. If the installation fails within a year of completion, we come back and make it right at no cost to you.

DIY or Call Us?

You can safely measure, photograph the model sticker, and check whether a hinge or slide is loose – that helps us quote accurately and saves time on the visit. Simple drawer-slide swaps and soft-close hinge replacements are within reach for many homeowners.

Where DIY goes wrong: cabinet boxes pulling off the wall are a load-bearing failure, not a cosmetic one. Re-anchoring into the wrong substrate or with undersized screws can drop the cabinet – and everything above it – onto the counter or floor. Countertop seam repairs need the right adhesive and clamping or they fail again within a season. And anything that involves shutting off a water line to the sink or dishwasher should be done by someone insured to touch it. Our technicians have up to 22 years of experience with Atlas systems, and they arrive identity-verified per The Threshold Standard – you’ll get their name and photo before the visit. Call (844) 797-6157 to schedule a free estimate.

FAQs

A freestanding soaking tub in a remodeled primary bathroom

How long do Atlas cabinets and parts last in an Enterprise kitchen? Most Atlas cabinetry holds up 15 – 25 years with normal use, but hinges, slides, and seams wear faster in our climate – often 7 – 10 years for the moving parts. The boxes usually outlast the hardware by a decade.

Can I repair a failing part instead of replacing the whole run? Often yes. A single hinge, slide, or door front can usually be swapped without touching the rest of the cabinet, and a countertop seam can sometimes be re-bonded if it hasn’t stained the substrate. We’ll tell you honestly which route makes sense for your Enterprise home. Call (844) 797-6157 for a free estimate.

How long does the swap take? A single drawer slide or hinge replacement is often 30 – 60 minutes. A run of cabinet fronts or an island panel typically takes half a day to a full day, and countertop seams need a clamp-and-cure window before the kitchen is usable again.

How do you source the Atlas-compatible part? We match your model and series first – frame vs frameless, bore size, overlay – then give you both the OEM option and a quality equivalent with pricing side by side. We don’t stock parts and we don’t carry them on a truck, so every part is ordered to your specific cabinet. Call (844) 797-6157 and we’ll start with a free estimate.

Whether you’re in a newer build off Horizon Ridge or an older home near the Enterprise core, Mason Remodeling Enterprise is here to give you a written price before any work starts, verify every crew member before they reach your door, and stand behind the installation with our 365-Day Done Right Promise. Kitchen work runs $14,000 – $45,000 depending on scope, and we also service KraftMaid, Cambria, and Silestone alongside Atlas-compatible products. Call (844) 797-6157 for a free estimate – a live person answers every call, 24 hours a day, 7 days a week.

Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA remodeled primary bathroom with a soaking tub and walk-in showerA remodeled living room with built-in shelves around the fireplaceA whole-home remodel with the living, dining and kitchen areas opened upA second-story addition that matches the existing rooflineA remodeled hall bathroom with subway tile and a floating vanity

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Enterprise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Enterprise team

A local vetted partner works across Enterprise and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-6157
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Mason Remodeling Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch