







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Driveway & Pavers: The Enterprise Owner’s Guide
We install and repair Barrette-compatible driveway and paver systems in Enterprise, and a typical paver driveway installation runs $7,000 to $18,000 depending on square footage, base prep, and border detail. Paver repairs and partial resets sit well below that. Most Enterprise owners find us after a heavy monsoon season pushes sand out of the joints, a paver heaves at a driveway apron, or a rut appears where the car parks every night. The failure is rarely the paver itself. It’s almost always the base, the edge restraint, or the joint sand that gave out first.

Which Barrette Models This Applies To

Barrette Outdoor Living paver and hardscape products don’t work like a garage door opener with a serial-matched part number. There’s no single “model” to match. What matters is the paver profile, the thickness, the joint width, and how the system is edged and bedded. Barrette’s paver lines are built around standard 60mm and 80mm profiles for driveway traffic and thinner units for walkways and patios. If your driveway carries vehicles, you want the 80mm range with a compacted aggregate base underneath.
To identify what you have, measure a single paver’s length, width, and thickness with a tape, and photograph the surface texture in daylight. Check the edge restraint along the street apron and the driveway sides – that metal or plastic lip is what keeps the field from spreading. If you have the original install paperwork, the product line name will be on it. If not, the measurements and photos tell us enough to source a match.
On the OEM-versus-aftermarket question: for pavers, a quality aftermarket equivalent in the same thickness and a close color match is usually the right call for repairs. Chasing an exact Barrette color from a discontinued run can take weeks when a current unit in the same family looks right after a season of weathering. We’re an independent service provider and not affiliated with Barrette, so we source what actually fits your existing field rather than pushing a specific label.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Driveway & Pavers Is Failing
- Joint sand washing out after storms. Monsoon rain in Enterprise pushes polymeric sand from the joints, and once the sand is gone the pavers start to shift against each other. Refilling joints without fixing the drainage just repeats the cycle next season.
- Pavers heaving at the apron or garage entry. A heave usually means water is trapped under the base and freezing, or the base wasn’t compacted in lifts. The paver looks fine – the problem is underneath it.
- Rutting where the car parks. Repeated load on a thin or poorly compacted base leaves a shallow depression. This is a base failure, not a paver failure, and patching the surface alone won’t hold.
- Edge spreading along the sides. If the edge restraint has pulled loose or was never set in concrete, the field spreads outward and gaps open through the middle. You’ll see a widening seam near the street.
- Loose or rocking units. A paver that rocks underfoot has lost its bedding. Left alone it chips at the corners and takes the neighbors with it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what driveway and paver work runs in Enterprise, installed:
| Scope | Installed Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
What moves the number: total square footage, how much base excavation is needed, whether the old surface has to come out, edge restraint, and border or accent bands. Our pricing is line-item and written before any work starts, so you see paver cost, base material, labor, and disposal as separate lines. Labor and material stay transparent instead of getting bundled into one lump. Every project carries our written guarantee with stated terms, and if an installation fails we come back at no charge.
DIY or Call Us?
Some of this you can safely check yourself. Walk the driveway after a rain and note where water pools. Press on a few pavers to see if any rock. Look along the edge for a loose restraint. Measure a paver and photograph the joints – that’s genuinely useful information for a quote.

Where DIY goes sideways is base work. Pulling pavers, re-excavating, and re-compacting a driveway base in lifts requires plate compactors and a feel for moisture content that most homeowners don’t have on hand. A quick sand refill on a driveway that’s actually rutting just hides the problem for one more season. And lifting a driveway field near a garage slab risks the slab edge. If you’re seeing heaves or spreading, that’s a base and edge job, not a weekend project. Call (844) 797-6157 and we’ll tell you honestly whether it’s a repair or a reset.
FAQs

A properly installed paver driveway lasts 25 to 30 years or more, but the joint sand and edge restraint need attention every few years in Enterprise’s heat and monsoon cycles. The pavers outlast the base maintenance. Call (844) 797-6157 for an inspection if yours is past the ten-year mark.
Yes, often. Isolated heaves, ruts, and spreading edges can usually be reset by lifting the affected field, fixing the base, and relaying the same units. A full replacement only makes sense when the base has failed across the whole driveway. Call (844) 797-6157 and we’ll give you a straight answer on which one you’re looking at.
Most partial resets finish in one to three days, depending on square footage and how much base needs reworking. Full driveway installations typically run three to seven days with cure and compaction time built in. Call (844) 797-6157 to schedule your free estimate and get a timeline in writing.
We measure your existing units, match thickness and profile, and source a current paver in the closest color family available. For repairs, a quality aftermarket equivalent in the same 60mm or 80mm profile is often the practical choice. We don’t claim to carry parts on a truck – the right unit gets sourced per job. Call (844) 797-6157 to start with a free estimate.
We also work with KraftMaid, Cambria, and Silestone on the interior side if your project grows. Our technicians have up to 22 years of experience, every crew member is background-checked and identity-verified through The Threshold Standard, and you’ll get their name and photo before they arrive. A written price comes before any work starts, backed by our 365-Day Done Right Promise.
Ready to get your driveway priced? Call Mason Remodeling Enterprise at (844) 797-6157 for a free estimate. A live person answers every call, any hour, any day.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












