







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Home Additions & ADU: The Enterprise Owner’s Guide
We build and install Barrette-compatible home additions and ADUs for homeowners in Enterprise, with projects typically running $45,000 – $130,000 depending on footprint and finish level. An ADU with its own kitchen, bath, and utilities lands in our $90,000 – $220,000 range. If what you actually have is a failing piece of a Barrette system, we can price a fix as a standalone repair job rather than a full project.

Owners in Enterprise usually find the problem the same way. A converted garage that passed inspection five summers ago now cracks along the slab edge or shows daylight at a frame joint. An addition door that used to close with one finger needs a shoulder. Or a Barrette window or panel assembly starts fogging, sticking, or deflecting. These are symptoms, not necessarily the end of the system. Here’s how to tell what failed, what it costs to fix, and where we’d recommend a trained installer.
Mason Remodeling Enterprise is an independent service provider. We are not affiliated with Barrette, and we don’t claim to be.
Which Barrette Models This Applies To

Barrette makes a wide catalog of exterior building products, and home addition and ADU assemblies sit at the intersection of several of them: windows, doors, siding, railing, and structural framing components. That makes part-matching less obvious than it is for, say, a single brand of hinge. The first step is always the label.
Look for the product label on the inside of the window or door frame, on the jamb, or on the panel edge for siding and trim. It carries the series line, the size callout, and often a date code. Sizes are nominal, not exact – a window labeled 32-by-60 will measure slightly under that once you account for the frame and rough opening tolerance. If you’re replacing a unit inside existing framing, the important number is the rough opening, not the glass size. Measure the opening at its narrowest point in both directions and write it down before you call anyone.
On the OEM-versus-aftermarket decision: for window and door units, the OEM assembly generally wins because the frame, weatherstripping, and hardware were engineered as one system, and mating an aftermarket sash to an existing Barrette frame is where leaks begin. For hardware, fasteners, trim, and trim-adjacent parts, quality aftermarket equivalents are often perfectly sound and cost considerably less. For anything structural in an addition or ADU – headers, connections, tie-downs – the part should match what the original plan specified, and in Enterprise that means matching local engineering requirements. We won’t suggest substituting a structural component just because it’s cheaper.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Home Additions & ADU Is Failing
- Daylight or a draught at a frame joint. Usually failed sealant or a loose anchor rather than a failed frame. Catch it early and it’s a reseal; wait through summer and it’s a re-set.
- A door or window that sticks or needs a shoulder to close. In Enterprise, this is often thermal movement across a slab or frame, not a broken unit. The fix depends on whether the frame has moved or simply expanded into its tolerance.
- Hairline cracks at the addition’s exterior wall corners or ceiling joint. Drywall and stucco cracks at the seam where new meets old are the most common aging symptom we see. Structural cracks are wider, run diagonally, and keep widening.
- Fogged or hazy glazing. That’s a failed sealed unit, not dirt. The desiccant is spent and the glass sandwich has lost its seal – it won’t clear, and it gets worse each summer.
- Warping, soft spots, or lifted edges on siding and trim. Moisture intrusion behind the cladding. In Clark County’s dry heat it can hide for months under the surface, which is why we probe and not just look.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Enterprise homeowners, our installed ranges for this work are:
- Home addition: $45,000 – $130,000
- ADU construction: $90,000 – $220,000
- Garage conversion: $30,000 – $80,000
- Standalone repair of a Barrette assembly (window, door, or seal): priced per job after inspection
What drives the range is footprint, roof structure, utility extensions, and finish level – not the brand label. A garage conversion with a finished bath and kitchenette sits near the top of its band. A same-footprint addition with modest finishes sits lower. You get a written line-item price before any work begins: materials, labor, permits, and inspection allowances, each on its own line. Our 365-Day Done Right Promise covers workmanship for 365 days from completion. If a repair or installation fails in that window, we come back at no charge.
If you’re weighing an ADU against a straight addition, come in with a budget range and we’ll tell you honestly which fits it. We also install KraftMaid cabinetry in ADU kitchens when the project calls for it.
DIY or Call Us?
Some checks are fair game. You can measure the rough opening, photograph the product label, look for daylight with the door closed, probe trim with a screwdriver, and note where cracks run. That information speeds up any quote.
Where DIY goes wrong on this work: anything structural. Cutting into a header, re-anchoring a frame to a slab, or opening a wall to chase moisture behind siding is how a $900 fix becomes a $12,000 repair. Load paths in an addition or ADU aren’t decorative – move the wrong piece and the wall above it starts to move. And anything that touches electrical, gas, or the building’s structural connection needs a licensed trade and a permit. Enterprise projects run through Clark County inspection on a schedule, and undocumented work found later is expensive to unwind.
If the work isn’t right after 365 days, we make it right at no cost. Call (844) 797-6157 to schedule a free estimate.
FAQs

With proper installation and maintenance, 20 to 30 years is realistic for the weathertight envelope of an addition or ADU. Clark County’s swing from 100-plus-degree summers to winter freezes is the real stress test. Seals, weatherstripping, and caulk joints wear faster than the structural components – those usually need attention every 5 to 8 years, not every 20. Call (844) 797-6157 for an exact quote – estimates are free.
Often yes. Failed caulk, loose anchors, sticking hardware, and drywall cracks at the addition seam are usually repairable, and we’ll tell you when a repair is the right call. A failed insulated glass unit or a warped structural member generally needs replacement, not repair. The inspection tells us which. Call (844) 797-6157 to schedule an assessment.
A window or door replacement is typically a single-day job once the unit is on site. A larger repair on a frame or envelope runs across a few days. A full addition or ADU is a months-long schedule, and we give you the timeline in writing before work starts. Call (844) 797-6157 and we’ll talk through your specific project.
We match your product label and rough-opening measurements to the correct Barrette series and order through authorized channels. We do not carry parts on a truck or stock them locally, so we won’t tell you we have it in stock when we don’t. What we will do is confirm the right part number before ordering. Call (844) 797-6157 for a free estimate and a written price before any work starts.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












