A Mason company - serving Enterprise, NV
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Barrette · Enterprise

Barrette Kitchen Remodeling in Enterprise, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Enterprise
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A small remodeled galley kitchen with cabinets to the ceiling
A remodeled hall bathroom with patterned floor tile and painted walls
A remodeled staircase with wood treads and a slim metal railing
A low-threshold walk-in shower with a bench and grab bar
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Barrette Kitchen Remodeling: The Enterprise Owner’s Guide

We handle Barrette kitchen remodeling in Enterprise, including the part-level swaps that keep an existing Barrette layout working – cabinet fronts, drawer slides, door hardware, and the trim and surface pieces that finish the job. Typical installed kitchen remodeling in Enterprise runs $14,000 – $45,000, and cabinet installation on its own sits at $4,000 – $13,000. Most owners don’t go looking for this. They notice it first: a drawer that won’t stay closed, a cabinet door that sags at the hinge, a counter seam that has started to lift after a dry summer.

Professional contractors installing new hardwood flooring in a home renovation project in Enterprise, NV

Call (844) 797-6157

Key Takeaways

  • Barrette-compatible cabinet and kitchen work in Enterprise: $14,000 – $45,000 installed for a full remodel.
  • Cabinet installation alone: $4,000 – $13,000. Countertops: $2,000 – $6,500. Backsplash: $800 – $2,500.
  • Written price before any work starts, backed by our 365-Day Done Right Promise.
  • We’re an independent service provider – not affiliated with Barrette.

Which Barrette Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Barrette makes a broad line of cabinet and storage systems, and the part that fits one door style often won’t fit another. Before we order anything, we measure the cabinet box depth, the door overlay, and the hinge boring pattern on the actual unit in your Enterprise kitchen. Door overlay is the detail most people miss: a full-overlay door and a partial-overlay door use different hinges, and swapping the wrong one leaves a gap you can see from across the room.

The identification step is simple. Look inside the cabinet for a label or sticker on the back panel or the inside of the door, note any series or part reference printed there, and photograph it next to a ruler. That photo plus the cabinet opening dimensions is what lets us match the right Barrette component instead of guessing.

Then comes the OEM-versus-aftermarket call. For hinges, slides, and shelf hardware, quality aftermarket equivalents are often the smarter buy – same fit, similar durability, lower cost – as long as the load rating and mounting pattern match. For door fronts and anything visible, we usually steer toward an OEM or specification-grade match so the finish and profile line up with the rest of the run. We don’t claim to stock Barrette parts or carry them on a truck; we source the right component for your specific unit and bring it to the job.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Barrette Kitchen Remodeling Is Failing

Cabinet and kitchen components fail in predictable ways, and the symptom usually points straight at the cause.

  • Drawers that stick or won’t close flush. Worn slides or a slide that has lost its alignment with the cabinet box. Under-drawer slides and side-mount slides wear differently, so the fix depends on which you have.
  • Doors that sag or rub the frame. Hinge fatigue, or screws that have pulled loose from the cabinet side. In Enterprise’s dry heat, wood and particleboard shrink and expand, and hinge screws loosen faster than most owners expect.
  • A cabinet door that won’t stay shut. A worn catch, a misaligned hinge, or a door that has warped slightly with seasonal humidity swings.
  • Counter seams lifting or a backsplash edge pulling away. Adhesive and caulk break down over time, and our summer temperature swings speed that up. Left alone, moisture gets behind the seam.
  • A cabinet interior that has gone soft or swelled. Water intrusion from a sink, a slow leak, or a dishwasher line. By the time you see swelling, the panel behind it is usually compromised.

Each of these is fixable, and most are cheaper to address when caught early. A soft cabinet floor or a failing slide under a loaded drawer is a small repair now and a bigger one after the box gives way.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A wide opening with a new beam where the kitchen wall was removed

Here’s what Barrette-compatible kitchen work runs in Enterprise. These are installed ranges, not parts-only prices.

Work Installed range (Enterprise)
Kitchen remodel $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What drives the range: cabinet count and layout, whether we’re matching an existing Barrette run or replacing a full set, door style and finish, and counter material. We put the price in writing before any work starts, every time, with the parts and labor broken out so you can see exactly what you’re paying for. Our work is covered by the 365-Day Done Right Promise – if it isn’t right within 365 days of completion, we make it right at no cost to you.

For surfaces, we also work with Cambria and Silestone when you want a specification-grade counter to go with the new cabinetry.

DIY or Call Us?

Some of this you can check yourself safely. Open and close every door and drawer, note which ones stick or sag, photograph any labels inside the cabinet, and check for soft spots or swelling under the sink. That information makes the job faster when you call.

Where DIY goes wrong: re-hanging a heavy cabinet door or re-mounting a loaded drawer slide without the right boring pattern and load rating. A door that comes off its hinges can fall, and a slide that isn’t rated for the drawer’s weight fails again within months. If a cabinet box has swelled or the mounting screws won’t hold, that’s structural and worth having looked at properly. Call us before you force a part that doesn’t fit.

Call (844) 797-6157 to schedule your free estimate. Estimates are free, and the written price comes before any work begins.

FAQs

A remodeled hall bathroom with subway tile and a floating vanity

How long do Barrette kitchen cabinets and components last in Enterprise? Fifteen to twenty years is typical for cabinet boxes and door fronts, while slides and hinges usually need attention first – often by year ten. Enterprise’s dry climate and big summer temperature swings speed up wear on wood, hardware, and caulk, so we often see slide and hinge issues before the cabinet itself fails.

Can you repair a failing Barrette part instead of replacing it? Often, yes. A slide, hinge, catch, or door can usually be swapped without touching the rest of the cabinet run, and that’s almost always cheaper than a full replacement. We’ll tell you honestly if a repair will hold or if the box behind it has gone soft.

How long does a Barrette part swap take? A single slide or hinge swap is often a short visit. A set of door fronts, a counter seam repair, or several drawers usually takes longer, and we’ll give you the time window in your written estimate. Call (844) 797-6157 for an exact quote – estimates are free.

How do you source the right Barrette part? You send us the label or part photo and the cabinet opening dimensions, and we match the component to your specific unit – OEM where the finish or profile needs to match, quality aftermarket where it fits and holds up equally well. We don’t claim to stock Barrette parts; we source what your cabinet actually needs.

Every crew member who comes to your door is background-checked, identity-verified, and introduced by name and photo before the visit, with a photo ID badge at arrival under The Threshold Standard. A live person answers every call, around the clock, every day of the year.

Call (844) 797-6157 for a free estimate on your Barrette kitchen work in Enterprise. You’ll get a written price before a single tool comes out of the bag, a clear scope, and our 365-Day Done Right Promise behind the finished job. We also service KraftMaid and Cambria kitchens in the area, so if your project touches more than the Barrette cabinetry, we can handle it in one visit.

Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled family room with new windows and a window seatA remodeled primary suite with built-in wardrobes and a window seatA garage converted into a guest room and home officeA wood double vanity with two mirrors after a bathroom remodelAn open living space after a whole-home remodelA finished backyard cottage with a small covered porch

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Enterprise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Enterprise team

A local vetted partner works across Enterprise and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-6157
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Mason Remodeling Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch