







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Roofing: The Enterprise Owner’s Guide
We install and repair Barrette-compatible roofing systems in Enterprise, and the honest answer on price is this: most roofing work tied to a failed Barrette component runs $400 – $1,800 for a targeted repair, while a full roof replacement on an Enterprise home typically lands between $8,000 and $20,000 installed. Barrette products are common on homes here, and the parts that fail are rarely the roof as a whole. It’s usually one component: a ridge cap lifting, a ventilation strip cracking, a transition flashing that let go at a valley after a monsoon season. You find out because of the ceiling stain in the hallway, the granule pile at the downspout base, or the drip line that shows up only when the wind drives rain sideways. Most Enterprise owners who land on this page already know something is wrong up there. What they don’t know yet is which part fails, whether it’s a Barrette part, and what the fix costs.

Which Barrette Models This Applies To
Barrette makes roofing components and accessories (ridge caps, vents, flashing and trim) rather than whole shingle lines, so the “model” question is really about matching the profile, not finding a single serial number. The place to start is under the roof, not on it. Pull any paperwork left with the house, then look inside the attic near the ridge for a manufacturer label stapled to a truss or rafter, and check the inside face of the ridge vent for embossed or stamped profile markings. Ridge vent profiles differ in width and height, and a Barrette vent sized for one roofline won’t seal a vent channel of a different width, which is the most common compatibility mistake we correct in Enterprise. If you’re replacing on an existing vent, measure the open channel width and the vent’s outside width before ordering anything. On the OEM-versus-aftermarket decision: for profile pieces where a slight color or dimension mismatch shows, we lean OEM-equivalent to keep the line clean; for hidden components like underlayment flashing, a quality aftermarket product is a reasonable cost call. Mason Remodeling Enterprise is an independent service provider and is not affiliated with Barrette.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Roofing Is Failing
Roof parts rarely announce themselves. They fail in ways you spot in the weeks after a storm. Here’s what we look for:
- Lifted or cracked ridge cap. Heat cycling and wind lift the cap edges and open a seam, letting water reach the underlayment and creating a slow ceiling stain that shows up days later.
- Cracked or displaced ridge vent. A vent strip that isn’t seated to the channel width or has cracked from thermal movement lets water and wind-driven rain past the ridge line.
- Failed valley flashing. The transition at the valley takes the heaviest water and, when it fails, leaks show up at the ceiling below that junction before anywhere else.
- Granule loss and bare spots. Granules at the downspout base and bald patches on the shingle surface signal the shingle layer is wearing, which changes whether you repair one piece or plan replacement.
- Water stains or dampness in the attic. A brown stain on decking or a damp patch on the underside of the ridge points to a vent or flashing failure, not usually the shingle field.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Enterprise, targeted roof repair runs $400 – $1,800, tile roof repair $600 – $2,500, and a full roof replacement $8,000 – $20,000 which is the range a worn Barrette component often leads to once the field shingles are past their life. What moves the number: roof height and pitch, how many layers are existing, whether the fix is one component or a whole slope, and whether decking needs to be replaced under a failed flashing. Parts and labor are quoted line by line. You get the written price before any work starts, so you can see the part cost and the labor cost separately. The work carries our 365-Day Done Right Promise; if the repair fails within a year of completion, we return and make it right at no cost. We’re part of the Threshold Group family of home-service companies.
DIY or Call Us?
Honest split: the diagnosis is something you can help with, the roof work usually isn’t. It’s fine to inspect from the ground with binoculars, check the attic for stains and damp decking, and pull the paperwork and label we described. That saves everyone time. What we don’t advise is getting on a pitched roof yourself, especially on the ridge line, where the work is highest, the surface is hottest, and a fall is a serious injury. Barrette component failures are seldom a single-part swap; they’re a seating and flashing problem that needs the shingle and underlayment opened up and closed correctly to stay dry. Our technicians have up to 22 years of experience, and we’d rather do the roof work than diagnose a fall.

Call (844) 797-6157 and a live person answers, day or night. We’ll set up a free estimate and show you exactly which component failed and what it costs.
FAQs

Most Barrette ridge vents and flashing fail in the 10 – 15 year range in this climate, with direct sun and the summer heat driving the wear. The wind and dust after a monsoon shorten that. Inspect annually. Call (844) 797-6157 for a free estimate on a replacement.
Often it can be repaired if the crack or lifting is caught before water has reached the decking; once the flashing has failed for a season, replacement is the durable call. We check for moisture in the decking before recommending. Call (844) 797-6157 for an exact quote, and the estimate is free.
A targeted component repair usually takes a half day to one day, and a full roof replacement runs two to four days, depending on size and pitch. Weather can shift it. We give the schedule in writing with the price. Call (844) 797-6157 to book the free estimate.
We match by profile and measurement (channel width, vent width, cap dimension) and source the equivalent through professional roofing supply, the same places that carry GAF, CertainTeed, and Owens Corning. We don’t stock parts on a truck; every part is ordered to your roof. Call (844) 797-6157 for an exact quote.
We also handle KraftMaid cabinetry, Cambria and Silestone surfaces where your whole-home project needs more than the roof.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












