







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Kitchen Remodeling: The Enterprise Owner’s Guide
Boral kitchen remodeling in Enterprise typically runs $14,000 to $45,000 installed, depending on whether you’re replacing cabinets and counters alone or reworking the full layout. We install Boral-compatible cabinetry, surfaces and trim in kitchens across Enterprise, and most projects start with a free written estimate rather than a same-day visit, because a kitchen remodel is planned work. Owners usually land on this page after a different discovery: a Boral cabinet door that won’t stay aligned, a countertop seam that’s lifted, or a finish that’s checked and cracked after a few summers in the desert heat. The good news is that most of these failures are one or two components, not a whole kitchen.

Key Takeaways
- Typical Boral kitchen remodel cost in Enterprise: $14,000 to $45,000, with a written price before any work starts.
- Most “failed” Boral kitchens need a specific component replaced, not a full tear-out.
- If a repair or installation fails, our free return visit covers it at no charge.
- Every crew member is identity-verified and introduced by name and photo before the visit.
Which Boral Models This Applies To

Boral covers a wide range of building products, and the kitchen side splits into cabinetry, countertop surfaces and trim. Before we quote anything, we identify exactly which line you have. That matters because Boral cabinet systems vary by door style, box depth and hinge pattern, and a replacement door or drawer front has to match the series, not just the color.
Here’s how to find your model. Pull open a cabinet door and look for the manufacturer label inside the box, usually on the back panel or the inside of the door itself. Write down the series name and any part number. If the label is gone, measure the door height, width and thickness to the nearest sixteenth of an inch, and note whether the hinges are concealed European-style or face-mounted. Those three measurements narrow the field fast.
OEM vs. aftermarket is a real decision with Boral. An OEM door or panel guarantees the match on color, grain and hinge bore, but lead times can stretch. A quality aftermarket equivalent is often faster and less expensive, and for a single replacement front the visual difference is usually negligible. We’ll tell you which one makes sense for your specific failure rather than defaulting to OEM every time.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Kitchen Remodeling Is Failing
Enterprise’s dry heat and big summer-to-winter temperature swings punish kitchen materials in ways coastal climates don’t. Here’s what we see most often, and what’s actually behind it.
- Doors that won’t stay closed or aligned. Usually a worn hinge or a shifted hinge plate, not a warped door. Desert humidity swings expand and contract the wood enough over a few years to loosen the screws holding the plate.
- A countertop seam that’s lifted or discolored. The seam adhesive has failed or moisture has worked in behind it. This is common near the sink and dishwasher, where heat and water meet.
- Finish checking or hairline cracks in cabinet faces. The finish is drying out and losing its flexibility. Direct sun through an east-facing window accelerates this faster than most owners expect.
- Drawer boxes that drag or stick. The slides have worn or the box has swelled slightly at the joints. A slide replacement usually solves it; a swollen box may need a new drawer.
- Loose or lifting backsplash tile at the counter joint. The caulk line or thinset has given way. Left alone, water gets behind the tile and the problem spreads.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Boral kitchen work runs in Enterprise, priced as installed ranges, not parts alone:
- Full kitchen remodel: $14,000 to $45,000
- Small kitchen remodel: $9,000 to $20,000
- Cabinet installation: $4,000 to $13,000
- Countertop installation: $2,000 to $6,500
- Backsplash installation: $800 to $2,500
- Kitchen island installation: $3,000 to $10,000
What drives the range: cabinet count and whether the boxes are replaced or just the fronts, countertop material and square footage, and whether the layout moves (which pulls in plumbing and electrical). When you call, we deliver a written price before any work starts. The 365-Day Done Right Promise covers the work for a full year from the completion date.
DIY or Call Us?
Some checks are safe to do yourself. Open every cabinet and confirm the label, measure your door and drawer fronts, and photograph any seam or crack up close. That information speeds up your estimate and costs nothing.
Where DIY goes wrong: rehanging cabinet doors, resetting a countertop seam or re-tiling a backsplash all involve alignment and adhesion that are easy to get subtly wrong, and the failure shows up months later. If you’re replacing a gas range or moving any gas line as part of the work, stop and call a licensed professional. Gas work is not a homeowner job.
If you’re weighing a component fix against a fuller remodel, call Mason Remodeling Enterprise at (844) 797-6157. The estimate is free and the price is in writing.
FAQs

Most Boral cabinet systems hold up 15 to 20 years with normal use, and countertops can last longer than that if seams are maintained. In Enterprise’s climate, finish and seam maintenance matter more than in cooler regions, and the dry air tends to dry out wood finishes faster. Call (844) 797-6157 for an honest read on whether yours has years left or is at the end of its run; estimates are free.
Often yes. A worn hinge, a loose slide or a failed countertop seam can usually be repaired or swapped without touching the rest of the kitchen. Structural damage to a cabinet box or a warped door is harder to fix and usually means replacement. Call (844) 797-6157 and we’ll tell you which side of that line you’re on before you commit to anything.
Most single-component swaps, like a door, a drawer or a countertop seam, are done in a single visit. A larger cabinet or countertop installation takes longer, typically several days depending on scope and material lead times. Call (844) 797-6157 and we’ll give you a realistic timeline with your written estimate.
We start from the model and part number on your cabinet label, or from measurements if the label is gone, and then match the closest correct component. We don’t claim to carry parts in stock or on a truck, but we do know how to identify and order the right one for your Boral series. Mason Remodeling Enterprise is an independent service provider and is not affiliated with Boral. Call (844) 797-6157 to get the process started.
Call Mason Remodeling Enterprise at (844) 797-6157 to schedule your free estimate on Boral kitchen work in Enterprise. A live person answers every call, our technicians bring up to 22 years of experience, and you’ll have a written price in hand before anything begins.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












