







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Enterprise Owner’s Guide
We install Boral-compatible roofing and replace failing components for homeowners across Enterprise. Installed roof repair on a Boral system typically runs $400 – $1,800, tile roof repair $600 – $2,500, and a full roof replacement $8,000 – $20,000. Most owners discover a problem the same way: a hairline crack across a tile after a hard freeze, a slipped tile sitting in the gravel at the base of a wall, or a brown water stain spreading across a ceiling in a room they don’t use often. Boral’s clay and concrete tile lines hold up well in the Nevada desert, but the fasteners, underlayment and mortar beneath them do not last forever.

Which Boral Models This Applies To

Boral’s roofing catalog splits into clay tile (often marketed as Boral Clay, in profiles like Barcelona, Saxony and Cordova) and concrete tile (Boral Roofing concrete lines, including flat, low and high-profile shapes). The compatibility gotcha that trips up most Enterprise homeowners: the profile of the cap and hip tiles has to match, and profiles that look identical from the ground often aren’t. Before you order a replacement tile, measure the exposed width in inches, check the tile thickness with a straight edge, and photograph the underside where the manufacturer’s stamp usually hides. That stamp is your model number. When you call us, we’ll ask for those measurements and photos, and we’ll compare against original Boral specs rather than guessing from a photo alone.
The OEM-versus-aftermarket decision matters more here than in most trades. Genuine Boral tile matches the profile, frost rating and color of what’s already on your roof, which matters if you’re repairing a visible slope. Quality aftermarket equivalents can match the profile and perform well on a hidden or back-of-house repair, and they cost less. We’ll tell you plainly which is which for your roof. One thing we won’t do: promise a color match from a different manufacturer and then let you find out after the install.
If your project also touches kitchens, baths or hardscape, we handle those trades too, with KraftMaid cabinetry, Cambria and Silestone surfaces among the brands we install.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Roofing Is Failing
Boral tile itself is forgiving of heat, but Nevada’s freeze-thaw cycles and intense summer sun wear on the layers beneath. When we look at a failed Enterprise roof, these are the patterns we see most:
- Cracked or spalled tiles. A visible crack or a patch where the surface has flaked away usually points to water absorbed and then frozen overnight. It’s common after a cold snap in the high desert, and a single cracked tile above an attic can let in enough water to stain a ceiling.
- Sliding or slipped tiles. If a tile has shifted downward out of line, the fastener or mortar holding it likely failed. This is easy to spot from a distance, and it always gets worse, not better.
- Granules in the gutters or at the base of walls. Small piles of material don’t come from the tile. They come from the underlayment aging out, and once the underlayment is gone you’re one storm from a leak.
- Ceiling stains or damp attic decking. Water finding its way inside almost always means the underlayment or flashings have given up, even when the tile above looks fine from the ground.
- Loose or crumbling mortar at ridges and hips. The mortar bedding the ridge caps dries and cracks in this climate. It’s the most common failure point we repair on tile roofs here.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Every price below is a range, because the number of tiles, the pitch of the roof and whether the underlayment needs replacing all change the total.

- Roof repair (individual tiles, flashing, mortar): $400 – $1,800
- Tile roof repair (Boral-profile tile): $600 – $2,500
- Full roof replacement: $8,000 – $20,000
- Metal roof installation: $15,000 – $40,000, if the tile system is past saving and you’re considering a change
You get a written, line-item price before any work starts: so much for tile, so much for underlayment, so much for labor, so much for disposal. No surprise invoice at the end. Every job is covered by our written guarantee with clearly stated terms, and a free return visit if an installation fails. Mason Remodeling Enterprise is an independent service provider and is not affiliated with Boral.
DIY or Call Us?
Some things you can safely check yourself. From the ground or through a window, look for slipped or cracked tiles. In the attic, check for damp decking or daylight. Look for grit in the gutters. Those checks won’t hurt you and they tell us a lot.
What we don’t recommend is climbing onto the roof to walk a Boral tile slope. Clay and concrete tile is brittle, and a single wrong footstep can crack several tiles and put you at risk of a fall. Roof work at height is genuinely dangerous, and that’s before you get to the fasteners and flashings, which are the parts most likely to be installed wrong by someone without the right experience. If your tile is cracked, something has slipped, or you’re seeing water indoors, call us. Have your measurements and photos ready, and we’ll talk through the options.
FAQs

Boral’s clay and concrete tiles often last 40 to 50 years or more. In Enterprise’s climate, though, the underlayment beneath them typically needs replacing around the 20 to 30 year mark, well before the tiles fail. That’s why we inspect the layer under the tile, not just what you see from the street. Call (844) 797-6157 to schedule a free estimate on your roof.
Usually, yes. A handful of damaged tiles, a loose ridge cap or failed flashing is often a repair in the $400 – $2,500 range rather than a full replacement. If the underlayment is intact, a repair is the honest answer, and we’ll tell you so. Call (844) 797-6157 for an exact quote, and estimates are free.
Most individual tile repairs are a half-day or less; a ridge or hip repair may take a full day. It depends on how many tiles are affected and roof access. You’ll know the time estimate before we start. Call (844) 797-6157 to get it scheduled.
We match from the tile’s profile, dimensions and manufacturer stamp, plus a photo of the underside if we can get one. We don’t keep parts on a truck or claim stock of every Boral line, so matching the right tile sometimes takes a few days. It’s worth the wait. Call (844) 797-6157 and we’ll walk through the identification first.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












