A Mason company - serving Enterprise, NV
A new rear addition with a vaulted beamed ceiling and tall windows
Boxabl · Enterprise

Boxabl Windows & Doors in Enterprise, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Enterprise
A wide opening with a new beam where the kitchen wall was removed
A garage converted into a guest room and home office
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
An open living space after a whole-home remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A remodeled living room with built-in shelves around the fireplace
An open kitchen and dining area after a remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boxabl Windows & Doors: The Enterprise Owner’s Guide

We install Boxabl-compatible windows and doors throughout Enterprise, and a full window replacement for a Boxabl unit typically runs $4,500 – $15,000 depending on how many openings you’re addressing and the glass package you choose; a single door swap sits well below that range. We’re an independent service provider, not affiliated with Boxabl, but our technicians have up to 22 years of experience matching parts to this platform and have seen the same failure points come up again and again in Southern Nevada. Owners usually discover the problem the same way: a door starts dragging on the threshold, a window crank goes stiff or snaps, condensation builds between the panes, or a dust storm pushes fine grit through a seal that was quietly failing for months.

professional general contractor service in Enterprise, NV

Call (844) 797-6157

Key takeaways:

  • Boxabl window and door openings follow the unit’s modular dimensions, so generic big-box stock often won’t drop in without modification.
  • Most Enterprise failures trace back to heat cycling and wind-driven dust, not defective parts.
  • We provide a written price before any work starts, and every installation carries a 365-Day Done Right Promise.

Which Boxabl Models This Applies To

A second-story addition that matches the existing roofline

Boxabl’s Casita is the model most Enterprise owners hold, but the platform has gone through revisions since early production, and window and door specs have shifted with them. The part that fits one production run may not fit another. Before we order anything, we identify the exact unit by finding the data plate or serial label – usually on the frame near the main entry or inside a utility panel – and we measure every opening rather than trusting a spec sheet. Opening measurements on a modular unit can vary by a fraction of an inch between builds, and in a swing door that fraction is the difference between a clean fit and a drag.

The OEM-versus-aftermarket call matters here. When a Boxabl-specific door or window is available, OEM keeps the fit and appearance matched to the original build. When it isn’t – and lead times on proprietary parts can stretch – a quality aftermarket equivalent in the correct dimension and glass rating does the job, sometimes better, because aftermarket suppliers build to a wider distribution base. We’ll tell you honestly which route makes sense for your Enterprise unit rather than pushing the more expensive one. We also service standard residential openings and know the KraftMaid, Cambria, and Silestone lines well, though this page focuses on Boxabl-compatible fenestration.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boxabl Windows & Doors Is Failing

Windows and doors in Enterprise live a hard life. Summer highs push past 110°F, and the swing between a scorching afternoon and a cool desert night works vinyl frames, seals, and hardware constantly. Here’s what to watch for and what’s actually going wrong underneath:

  • Condensation or fog between the panes. That’s a failed seal in a double-pane unit, and once the desiccant saturates, the window won’t clear. In our climate the interior fog often shows up first on southwest-facing glass that absorbs the most afternoon sun.
  • A door that drags or won’t latch cleanly. Usually a shifted hinge or a frame that has swelled and contracted through too many heat cycles. Left alone, the drag wears the weatherstripping and lets dust in.
  • Stiff or broken window cranks and latches. The operator mechanism on a casement or awning window takes grit into its track; windblown desert dust accelerates this, and a stripped crank means the sash is stuck open.
  • Drafts and heat bleed at the seals. Worn weatherstripping or a compressed gasket lets cool air escape and hot air enter. You’ll notice it on your power bill before you notice it by hand.
  • Water stains or soft spots at the sill. This is the one to take seriously: a failed seal that lets monsoon rain past the sill can rot framing behind it. Get it inspected before it spreads to the surrounding wall.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A project lead and homeowner reviewing plans in a room under renovation

Installed window replacement for a Boxabl unit in Enterprise runs $4,500 – $15,000, and if you’re upgrading to impact-rated glass for added storm and breakage protection, impact window installation runs $8,000 – $25,000. The range depends on four things: how many openings, the glass package (standard versus impact-rated), frame material and color, and whether the existing rough opening needs repair before the new unit goes in. A single failed door or a two-window swap lands toward the low end; a full envelope of windows with impact glass lands at the top.

We give you a written price before any work starts – itemized, with parts and labor separated, so you can see exactly what a hinge assembly, a glazed sash, or a complete unit costs and what the install adds. No verbal estimate that grows on the final bill. Every installation carries the 365-Day Done Right Promise: if the work isn’t right within a year of completion, we make it right at no cost to you, and if a repair or installation fails we come back free.

DIY or Call Us?

There’s honest DIY territory here, and then there’s the point where it turns into a callback. You can safely check and maintain: lubricate hinges and window tracks, replace weatherstripping, tighten visible screws on a hinge plate, and inspect seals around the frame for cracks. That routine care genuinely extends the life of the hardware.

Where DIY goes wrong is at replacement. Swapping a window or door in a modular unit means matching a specific opening dimension, resealing the rough opening against a desert climate that will test that seal within one summer, and getting the thresholds and flashings right so the May-to-September monsoon rain doesn’t find a path inside. A mis-sized door isn’t just a draft – it’s a security gap on an exterior entry, and a poorly sealed sill can rot framing you can’t see. Once the diagnosis points to a failed unit rather than worn hardware, it’s worth handing off. Call (844) 797-6157 and we’ll give you a written price before anything is ordered.

FAQs

Footing forms with tied rebar for a home addition

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A galley kitchen opened up to the dining room with a new peninsulaA walk-in shower with large-format tile and a built-in nicheA remodeled staircase with wood treads and a slim metal railingA small remodeled galley kitchen with cabinets to the ceilingA low-threshold walk-in shower with a bench and grab barA finished basement family room with a media wall and wet bar

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Enterprise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Enterprise team

A local vetted partner works across Enterprise and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-6157
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Mason Remodeling Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch