







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Bufftech Kitchen Remodeling: The Enterprise Owner’s Guide
Bufftech kitchen remodeling projects in Enterprise typically run $14,000 – $45,000 when we install specification-grade cabinetry, counters, and fixtures matched to the Bufftech series already in your home. We deliver a written price before any work begins, so you know the full number before a single tool is unpacked. Most Enterprise owners find out something is wrong the same way: a cabinet door that hangs a half-inch low, a counter seam that has started to shadow, or a drawer that no longer closes flush against the face frame.

Bufftech isn’t a household name the way KraftMaid or Cambria is, and that throws a lot of Enterprise homeowners off when they start pricing a kitchen remodel. The cabinets are solid. The problem is that the hardware, fillers, and panel profiles were sourced to a spec that no longer matches anything on a big-box shelf, so a general handyman who shows up expecting standard sizing will stall out. This page is for the owner who already knows that and wants straight answers: what fits, what it costs in Enterprise, and exactly who is going to show up at the door.
Which Bufftech Models This Applies To

Bufftech built kitchen cabinetry and related millwork across several series, and the single most common mistake we see in Enterprise is a homeowner ordering replacement doors or drawer fronts sized to the visible opening instead of the overlay spec. Most Bufftech face-frame lines from the mid-2000s onward use a 1/2-inch standard overlay, but a few of the European-style frameless lines run a fuller full-overlay or 3/4-inch overlay, and those two do not interchange. If you order a standard-overlay door for a full-overlay box, it will leave a gap on one edge and bind on the other.
Here’s how to identify what you actually have before anyone quotes you a price:
- Look inside the cabinet. Bufftech typically applied a paper or foil label to the interior sidewall or the back of the cabinet, sometimes near the hinge plate. The model or series number is often printed there, along with a production date.
- Measure the hinge cup. A 35mm cup with a 45mm or 48mm screw pattern usually points to a specific hinge family, which narrows the series.
- Measure the overlay, not the door. Pull one door, measure from the cabinet edge to the hinge side of the door face. That tells you the overlay the box was built for.
On the OEM-versus-aftermarket question: Bufftech-branded doors are largely unavailable new, so most Enterprise projects use a specification-grade aftermarket match in the same species, finish, and profile. That’s not a downgrade. A good millwork shop will match the finish sheen and stile width to within a millimeter, and we’ve done it many times. What you want to avoid is a cheap import door with a different core thickness; those warp within a Nevada summer.
We should state plainly: Mason Remodeling Enterprise is an independent service provider. We are not affiliated with, endorsed by, or sponsored by Bufftech. We work with the cabinets you already own.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Bufftech Kitchen Remodeling Is Failing
Kitchen cabinetry doesn’t usually fail all at once. In Enterprise, where summer highs push past 105°F and indoor humidity swings hard between the monsoon weeks and the dry fall, the failure shows up in a predictable order. Here’s what to look for:
- Doors that hang low or rub the frame. The hinge has lost tension or the mounting screw has stripped out of the particleboard box. Once a screw hole in cabinet-grade particleboard strips, it rarely holds again without a repair sleeve.
- Drawer boxes that no longer glide flush. The undermount slide is worn, or more often the drawer bottom has swollen at the edges because of a slow leak from the sink above. In Enterprise we see this most often in kitchens on the west side of the house, where the afternoon sun bakes the sink wall and any moisture sits.
- Bubbling or peeling on the door face near the dishwasher. The laminate or thermofoil skin is delaminating from heat and steam. It’s cosmetic at first, then the edge lifts and catches on everything.
- A counter seam that has opened or shadowed. The substrate has moved, or the original seam adhesive has failed. Left alone, a 1/16-inch gap becomes a place for water to get into the cabinet below.
- Cabinet boxes pulling away from the wall at the top. The original fasteners have backed out of drywall anchors that were never rated for the load. This one is worth a look, because a full upper cabinet coming down is a genuine hazard.
Replacement Cost & What’s Included

For Enterprise, here’s how the numbers shake out when you’re replacing failing Bufftech kitchen components rather than doing a full gut:
- Cabinet installation (full replacement set): $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
- Full kitchen remodel (cabinets, counters, backsplash, island): $14,000 – $45,000
- Small kitchen remodel (galley or condo-sized): $9,000 – $20,000
What drives the number is the door and drawer count, whether you’re keeping the boxes or replacing them, and whether the plumbing and electrical have to move. Every quote from us is a written price, delivered before any work starts, with parts and labor broken out line by line. No verbal estimates that grow on the final bill.
The finished work carries our 365-Day Done Right Promise: if something we installed isn’t right within 365 days of the completion date, we come back and make it right at no cost to you. We also provide a free second visit if a repair or installation fails, no dispute process and no conditions.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this an owner can handle safely. Adjusting a European hinge with a screwdriver is fine, and so is tightening a drawer slide that’s worked loose. What we’d steer you away from is anything involving the cabinet boxes themselves, and especially anything that requires disconnecting the sink, the gas line behind the range, or any electrical inside the wall. A gas line is not a weekend project. Neither is a countertop tear-out, because the substrate underneath often reveals water damage you can’t see from above, and a homeowner working around a live outlet behind a cabinet is asking for trouble.
The middle ground is where most Enterprise homeowners land: they know a cabinet needs replacing but aren’t sure whether the box behind it does too. We’ll tell you honestly which it is. Call (844) 797-6157 to schedule a free estimate, and we’ll bring you a written price.
FAQs

Most Bufftech cabinets in Enterprise hold up 15 to 20 years if the hardware is maintained and the kitchen is ventilated, and less in kitchens where the sink wall gets direct afternoon sun. The boxes themselves last longer than the doors and slides, which is why replacing fronts and hardware often isn’t worth it past year 18. Call (844) 797-6157 for an exact quote, estimates are free.
Often yes, if the box is sound and only the hinge, slide, or door face has failed. Stripped screw holes can be fixed with a repair sleeve, and a delaminating door can sometimes be refaced. If the particleboard has swollen from water damage, repair isn’t worth it. Call (844) 797-6157 and we’ll tell you which one you’re looking at.
A single door or drawer front swap takes under an hour once the part is on-site. A full cabinet replacement set runs two to four days depending on the size of the kitchen and whether the counters come out. Call (844) 797-6157 to get a realistic timeline for your kitchen.
We match by overlay spec, species, finish sheen, and stile width, then order through a millwork shop that carries specification-grade profiles. When a true Bufftech OEM part is no longer available, we source the closest aftermarket equivalent and show you the sample before ordering. We also work with KraftMaid, Cambria, and Silestone for full-kitchen replacements. Call (844) 797-6157 for a free estimate.
Schedule Your Free Estimate
A kitchen that’s half-failing is a kitchen you stop wanting to cook in. We’d rather you call early than wait until a cabinet door is hanging by one screw. Every Mason Remodeling Enterprise crew member is background-checked and identity-verified under The Threshold Standard, and you’ll receive the technician’s name and photo before the visit, plus a photo ID badge at the door. A live person answers the phone around the clock, every day. Call (844) 797-6157 for a free estimate and a written price before any work starts.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












