







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Kitchen Remodeling: The Enterprise Owner’s Guide
If your kitchen project is built around Cambria quartz, replacement and remodeling work in Enterprise typically runs $14,000 – $45,000 for a full kitchen, with countertop installation alone at $2,000 – $6,500 and cabinet installation at $4,000 – $13,000. We handle Cambria-compatible kitchens as an independent service provider, which means we’re not affiliated with Cambria, but we know their product line and how it behaves in a Southern Nevada kitchen.

Most Enterprise owners don’t start with “I need a parts page.” They start with a slab that chipped at the sink edge, a seam that opened after a dry summer, or a base cabinet that sagged under the weight of a 3cm Cambria top because the carcase was never rated for it. Those three failures are the reason this page exists. If your kitchen has any of them, the numbers below tell you what the fix costs before you pick up the phone.
Which Cambria Models This Applies To

Cambria’s quartz line doesn’t carry “models” the way a water heater does. It carries designs grouped into collections, and those collections matter because slab thickness and finish determine how a countertop gets installed and what substrate it needs. The two thicknesses you’ll meet in an Enterprise kitchen are 2cm and 3cm; “natural finish” lives in the New Cambria collection and the textured matte textures in the signature matte grouping. Before you order anything, measure the actual installed thickness at a cabinet edge and identify the design name from the original fabricator’s invoice or a swatch sample, not from memory.
The OEM-versus-aftermarket decision here is really a fabricator decision. Cambria quartz is sold through authorized fabricators, and an unlicensed cut can void the slab’s warranty. For cabinetry under a Cambria top, we source specification-grade boxes rated for stone weight: KraftMaid and Wellborn are the two lines we specify most, and Silestone is the quartz alternative if you want the same 3cm look at a lower price point. Kohler and Moen handle the sinks and faucets. If you’re replacing one piece, matching the original supplier keeps the seam and edge profile consistent; if you’re redoing the whole kitchen, that’s the moment to standardize on one brand for the whole surface.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambria Kitchen Remodeling Is Failing
- Hairline cracks radiating from the sink or cooktop cutout. Cutouts concentrate stress, and an unsupported span will crack before the slab itself fails. This is the most common quartz problem we see in Enterprise.
- A seam that’s gone visibly dark or opened. Seams open when the substrate moves underneath. In our dry climate, cabinets can shrink and shift across a season, and a seam bonded to a flexing box will open within a year.
- Base cabinets sagging under the top. A 3cm Cambria slab is heavy, and a stock cabinet not rated for stone will deflect. You’ll see it first as a door that won’t stay closed and a gap at the countertop edge.
- Discoloration or a dull ring near the dishwasher. Quartz is non-porous, so staining points to a surface defect or a finish that was damaged by an abrasive cleaner, not a penetration issue.
- Chipping at the exposed edge. Edge chips happen when a profile is cut too thin for the slab’s actual thickness. It’s a fabrication specification you can check against the thickness you measured above.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Cambria kitchen in Enterprise, expect $14,000 – $45,000 across the whole room and $2,000 – $6,500 if you’re replacing the countertop only. The range is set by countertop square footage, cabinet box quality (a stone-rated KraftMaid box costs more than a stock box but won’t sag), island size ($3,000 – $10,000), and backsplash ($800 – $2,500).
Every project gets a written, line-item price before any tool comes out, so you see the slab, the fabrication, the cabinet boxes, the fixtures, and labor as separate lines. No surprise invoices after the fact. The work carries a written guarantee for 365 days from the completion date, and if an installation fails inside that window, we come back at no charge. We source Cambria through authorized fabricators, and we don’t claim to stock parts on a truck.

DIY or Call Us?
You can safely do three things yourself: measure the slab thickness at the cabinet edge, photograph the failing seam or chip with a ruler in frame, and locate the original invoice or swatch. Skip the cutting, the fabrication, the cabinet swap, and anything involving the sink or cooktop plumbing. Quartz fabrication is a wet-cut, dust-controlled, template-driven trade, and a bad cut is not a repairable mistake; it’s a new slab. Lifting a 3cm slab without the right clamps and suction cups risks a crush injury and cracks the material. If your only issue is a chipped edge or a dull finish, that’s a polish-and-seal job, not a replacement, and we’ll tell you so.
Call (844) 797-6157 for a free estimate. A live person answers every call, any hour, any day.
FAQs

How long does Cambria quartz last in an Enterprise kitchen? Cambria quartz should last decades indoors, and that’s the slab, not the installation. The material itself is durable. What fails first is everything around it: unsupported cabinets, moving substrate, an open seam. When installed on a stone-rated box with proper substrate, you’ll get the full life out of it.
Can Cambria be repaired instead of replaced? Sometimes, yes. Small chips and dull spots can be polished and refilled in place. Cracks through a cutout, an open seam, or a sagging cabinet underneath usually can’t be repaired without removing the top, because the fix is underneath. We’ll tell you honestly which side of that line you’re on, and the estimate is free.
How long does the swap take? A countertop-only replacement is typically a one-day fabrication and a one-day install around the plumbing and electrical. A full Cambria kitchen with new cabinets runs one to three weeks depending on cabinet lead times and island work. We give you the schedule in writing before work starts.
How do you source the Cambria slab? Through authorized Cambria fabricators, and we confirm the thickness, finish, and design name against the original invoice or a swatch before cutting. If you have the original supplier, we match through them; if not, we identify the design from a sample. We don’t carry parts on a truck and we don’t stock slabs, so plan the timeframe.
Cambria also pairs well with KraftMaid and Wellborn cabinetry, Silestone as a quartz alternative, and Kohler fixtures, all of which we specify regularly. If your Enterprise kitchen project has a Cambria surface at its center, call (844) 797-6157 for a free estimate, and we’ll put the price in writing before anything starts.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












