







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Driveway & Pavers: The Enterprise Owner’s Guide
We install and repair CGI-compatible driveway and paver systems throughout Enterprise, and a full paver driveway installation typically runs $7,000 – $18,000 depending on square footage, base prep, and paver selection. If you’re patching a section, sealing, or replacing a poured surface, concrete driveway installation in Enterprise lands at $4,500 – $12,000 and asphalt paving at $3,500 – $9,000. We’re an independent service provider, not affiliated with CGI.

Most Enterprise owners discover the problem the same way: a hairline crack that fans out after a summer of 110°F heat, pavers that rock underfoot where the base washed out, or a low spot near the garage apron that holds water after every monsoon. Southern Nevada’s shrink-swell soils and hard sun are unforgiving on driveways and hardscape, and the failure usually starts below the surface long before you see it.
Key Takeaways
- Paver driveway installation in Enterprise: $7,000 – $18,000 installed.
- Concrete driveway: $4,500 – $12,000. Asphalt: $3,500 – $9,000. Replacement: $5,000 – $14,000.
- Sealing runs $250 – $700 and is the cheapest way to extend surface life in our climate.
- We write the full price before any work starts, backed by the 365-Day Done Right Promise.
Which CGI Models This Applies To

CGI hardscape and driveway systems show up under several product lines, and the part that fits one series often won’t fit another. Before we quote anything, we identify your system by three things: the model or series label stamped on the paver or edge restraint, the actual measured dimensions of the unit (CGI pavers commonly run in standard 60mm and 80mm thicknesses, with 80mm reserved for driveways that take vehicle loads), and the joint pattern as originally laid. A 60mm paver that’s fine on a walkway will fail fast under a truck tire, so thickness matters more than color or shape.
Where a CGI component is discontinued or back-ordered, we match it against specification-grade equivalents from Belgard, Unilock, and Techo-Bloc, which gives you a professional-grade replacement rather than whatever a big-box aisle happens to stock. On the OEM-versus-aftermarket call for CGI, the honest answer depends on what’s failing: lateral restraint and base materials are commodity items where a quality equivalent performs identically, while a decorative surface paver you’re trying to blend into an existing field is worth matching to the original as closely as possible. For related interior work, we also service KraftMaid, Cambria, and Silestone.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Driveway & Pavers Is Failing
- Pavers rocking or shifting underfoot. The bedding sand has migrated or the base compacted unevenly. In Enterprise, this often traces to water channeling off the roof or apron and eroding the sub-base.
- Widespread crack networks on concrete. Shrink-swell clay soils expand and contract through our wet winters and dry summers, and a slab poured without proper control joints or a compacted base will crack at the weakest line.
- Sunken low spots holding water. Ponding after a monsoon points to settlement beneath the surface. Standing water then accelerates the next failure, so a low spot is a warning, not a cosmetic issue.
- Faded, chalky, or pitted surface. UV exposure and our intense sun break down sealers and surface binders faster here than in milder climates. A driveway that hasn’t been sealed in several years will show this first.
- Loose edge restraints and spreading joints. When the edging that holds the field in place loosens, pavers creep outward and joints widen, letting sand and water escape. Left alone, the whole field destabilizes.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Enterprise homeowners actually pay for driveway and paver work, installed, with materials and labor together:
| Project | Installed Price Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Full driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
What moves a quote toward the top of the range: square footage, how much base excavation and haul-off the site needs, whether the existing surface has to be broken out and removed, and the paver line you choose. We give you a written line-item price before any work starts, so material and labor are separated and nothing appears on the final bill that wasn’t on the quote. Every driveway and paver project is covered by the 365-Day Done Right Promise: if the work isn’t right within 365 days of completion, we make it right at no cost to you.
DIY or Call Us?
Some things are safe to check yourself. Walk the driveway after rain and note where water pools, look for rocking pavers or widened joints, and confirm whether the surface has been sealed in the last few years. Sealing a sound, intact driveway is a reasonable weekend project at $250 – $700 installed, and it’s the single best defense against our sun and soil movement.
The line is base and structural work. Re-setting a sunken paver field, rebuilding a failed sub-base, or replacing a cracked slab means excavation, compaction in lifts, and getting drainage right. Done wrong, a DIY patch fails again within a season and you pay twice. There’s also a real safety side: a lifted paver or a heaved slab is a trip hazard, especially near the garage, and that matters if kids or older adults use that path daily. Give us a call at (844) 797-6157 and we’ll tell you honestly whether you need a repair or a replacement.
FAQs

A properly installed paver driveway with an 80mm base and a sound sub-base typically lasts 25 years or more; concrete driveways often run 20 – 30 years with good joint maintenance. Our climate is the wildcard – intense UV and shrink-swell soils shorten that if sealing and drainage are neglected. Call (844) 797-6157 for an exact quote, and estimates are free.
Often yes. Isolated rocking pavers, a single settled area, or a hairline crack can usually be repaired by lifting, re-leveling the base, and re-setting, which costs far less than a full replacement. Widespread cracking or multiple sunken spots across the field usually means the base itself has failed and replacement is the honest answer. We’ll show you which situation you’re in before quoting.
A paving or replacement project typically takes one to three days on site, plus curing time for concrete. Small repairs can finish in a single visit. We give you a clear schedule in the written quote so you know what to expect, and we don’t promise same-day work on a full installation – you deserve a realistic timeline, not a rush.
We identify your system by the series label, measured paver thickness, and joint pattern, then match an OEM component or a specification-grade equivalent from Belgard, Unilock, or Techo-Bloc. Where a discontinued CGI paver can’t be matched exactly, we’ll tell you plainly and show you the closest blend options. Our technicians have up to 22 years of experience with hardscape installs, and every crew member is background-checked and identity-verified under The Threshold Standard, with their name and photo sent to you before the visit.
Whether your CGI driveway needs a single repair or a full replacement, we’ll put the price in writing before any work starts. Call Mason Remodeling Enterprise at (844) 797-6157 for a free estimate, and a live person answers every call, day or night.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












