







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Windows & Doors: The Enterprise Owner’s Guide
We install and service windows and doors built on CGI profiles in Enterprise, and most homeowners end up here when a sash stops latching, a door starts dragging, or glass fogs from the inside. Window replacement in Enterprise typically runs $4,500 – $15,000 for a whole-home package, and impact-rated units run $8,000 – $25,000. We’re an independent service provider, not affiliated with CGI, so we match the right part to your model rather than pushing whatever’s on a shelf.

How you usually find out: the door that used to close with two fingers now needs a shoulder. Or a bedroom window that sealed fine last summer won’t sit flush in August. Most Enterprise failures announce themselves slowly and then all at once.
Key Takeaways
- CGI window and door parts are matched by series and by measured glass size, not by brand name alone.
- Vinyl and aluminum frames expand hard in Enterprise heat, and that expansion is behind a lot of “sudden” latch and seal failures.
- Fogged insulated glass means the seal failed. The glass gets replaced; the frame usually stays.
- Call (844) 797-6157 to schedule a free estimate with a written price before any work starts.
Which CGI Models This Applies To

CGI builds residential window and door systems across vinyl, aluminum, and impact-rated lines, and the parts inside them are not interchangeable between lines. A latch set for one series will often physically fit another series and then fail within a season because the strike geometry is different. Before we quote anything, we identify the series from the label on the frame or sash, usually a small manufacturer sticker in the head jamb or on the top edge of the sash. If the label is painted over or gone, we measure the visible glass and the frame opening, then match to the profile dimensions CGI used for that production run.
This is where the OEM-versus-aftermarket call matters for CGI specifically. Hardware like latches, rollers, weatherstripping, and glazing gaskets has solid professional-grade equivalents that cost less than ordering an OEM replacement and hold up the same in Southern Nevada heat. Glass is different. Insulated glass units need the right thickness, spacer type, and low-E coating to match the energy performance of the rest of the assembly, and a mismatched unit will show it in summer cooling bills. We tell homeowners plainly which parts we’d use aftermarket and which we’d order through the manufacturer.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Windows & Doors Is Failing
Here’s what we actually see when we take a look at CGI windows and doors around Enterprise:
- The door drags on the threshold in summer. Vinyl and aluminum frames expand in heat, and a door hung in January sits lower in July. Usually it’s an adjustment or a worn roller, not a new door.
- Fog or condensation between the panes. The sealed glass unit lost its seal. That’s a glass replacement, and the frame normally stays in place.
- A window that won’t latch or lock smoothly. The locking hardware has worn or slipped out of alignment. Sometimes a striker adjustment, sometimes a new latch set.
- Daylight or a draft around the sash edge. Weatherstripping and gaskets age out faster here than most homeowners expect because of heat cycling. Cheap fix if caught early, glass damage if ignored.
- Water stains on the sill after monsoon storms. The glass seal, the weep system, or the perimeter caulk failed. We find which before recommending anything.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Enterprise, window replacement runs $4,500 – $15,000 and impact window installation runs $8,000 – $25,000. What moves the number is unit count, frame material, whether you’re going impact-rated, and how much of the interior trim needs to come out to do the job properly. A single fogged glass unit is a fraction of a full window. A sliding door with a failed roller is usually a service call, not a replacement.
The price we give you is written, line-itemed, and delivered before any work starts. No surprise invoices, no verbal estimates that grow on the final bill. Every crew member is background-checked and identity-verified through The Threshold Standard, and you receive the technician’s name and photo before the visit, plus a photo ID badge at the door. Every project is covered by the 365-Day Done Right Promise: if the work isn’t right within a year of completion, we make it right at no cost to you. If a repair or installation fails, we return for a free second visit.

DIY or Call Us?
You can safely check a few things yourself. Look for the manufacturer label on the frame. Wipe the tracks and clean the weep holes. Tighten a visibly loose strike plate screw. Feel the weatherstripping along the sash edge for brittleness.
Where homeowners get hurt or make the problem worse: replacing a failed insulated glass unit, resealing a frame that’s already taking on water, and adjusting a sliding door roller without knowing whether the track is true. Glass work carries real injury risk, and a badly seated unit traps moisture and voids whatever warranty the glass came with. Our technicians have up to 22 years of experience and will tell you honestly which of these is worth fixing. Call (844) 797-6157 and we’ll schedule a free estimate.
FAQs

Expect 20 to 25 years from a well-installed CGI window frame, less for seals and hardware. The rubber and foam components wear faster in Southern Nevada than in milder climates, so weatherstripping and gaskets often need replacing before the glass does. Call (844) 797-6157 for a free assessment on your specific units.
Usually yes. A fogged sealed unit gets its glass replaced, not the whole window. A sticking latch, dragging door, or worn weatherstripping is a hardware job. Full replacement is the answer when the frame is cracked or the glass needs impact-rated performance. We give you a written price on both options so you can compare.
A single window or door hardware repair takes under two hours. A full window replacement runs one to three days depending on how many units and whether trim work is involved. We give you a written timeline before any work starts, so there are no surprises.
We identify your CGI series from the frame label or a measured match, then order through the manufacturer for glass and proprietary hardware and use professional-grade equivalents for standard parts like latches and weatherstripping. We carry no stock of parts and no parts on a truck. Everything is sourced to your model, which is why we check the label first.
When you’re ready for a real number on your CGI window or door, call (844) 797-6157. Every estimate is free, every price is written before work starts, and every project is backed by the 365-Day Done Right Promise. We also work with other brand lines in these homes, including KraftMaid, Cambria, and Silestone.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












