







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cover Bathroom Remodeling: The Enterprise Owner’s Guide
Mason Remodeling Enterprise handles Cover bathroom remodeling for Enterprise homeowners, with full bathroom projects typically landing between $9,000 and $28,000 installed, and small bath work between $5,000 and $12,000. We’re an independent service provider, not affiliated with Cover, and we work from your actual model and spec sheet rather than a guess. We schedule estimates within days, not weeks, and you’ll get a written price before any work starts.

Most Enterprise owners don’t arrive at this page by browsing. They arrive because something in a Cover bathroom already went wrong: a vanity cabinet face that swelled after a slow leak, a shower pan that flexes underfoot, grout cracking in a line along the floor, or a fan that stopped pulling steam out of a room with no window. In Nevada’s dry heat, the failure often shows up as a crack or a gap rather than the mold you’d expect in a wetter climate, which is exactly why so many small problems get ignored until the damage is bigger.
Key Takeaways
- Cover bath projects in Enterprise run $9,000 – $28,000; small baths $5,000 – $12,000.
- Nevada’s low humidity hides early water damage. Cracks and loose tile show up before mold does.
- We verify every crew member by name and photo before the visit, under The Threshold Standard.
- Written price before work starts, backed by our 365-Day Done Right Promise.
- Live person answers the phone, day or night.
Which Cover Models This Applies To

Cover’s bath line spans vanity and cabinet systems, shower and tub surrounds, and the trim and hardware that ties them together. The compatibility trap is that a part number on the box rarely matches the part number on your installed unit. Cover has revised vanity cabinet depths and drawer-box heights across production runs, and a door face or drawer front from the wrong run will bolt on crooked or not at all. Before we order anything for an Enterprise job, we read the label inside the cabinet door or on the back of the vanity panel, measure the actual opening, and photograph the hinge pattern.
The OEM-versus-aftermarket call comes down to what fails. For a visible door face, drawer front, or trim piece, a quality aftermarket equivalent in the same finish is often indistinguishable and quicker to source. For anything structural or water-sealing, we lean OEM or a spec-matched substitute, because a shower pan or surround panel that’s a few millimeters off will leak at the seams no matter how well it’s installed. Where Cover doesn’t have a match, we can spec Kohler, Moen, Toto, or Grohe fixtures and KraftMaid, Cambria, or Silestone surfaces that fit the same footprint.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cover Bathroom Remodeling Is Failing
These are the symptoms Enterprise owners describe when they call us. Each one points to a specific cause, and catching it early usually keeps the repair in the hundreds instead of the thousands.
- Grout cracks in a straight line along the floor or wall. That’s usually movement, not grout failure. A shower pan or subfloor that flexes underfoot cracks the grout above it, and re-grouting without fixing the flex just buys you a few months.
- A shower pan that gives when you step near the drain. The pan has lost its mortar bed or the drain seal has failed. In Enterprise’s dry air, the moisture wicks away fast enough to hide the leak until the framing underneath is already soft.
- Vanity doors that no longer sit flush or rub the frame. Cabinet boxes swell and hinges pull loose when water gets behind the vanity. A slow supply-line drip is the usual culprit, and it rarely shows on the floor.
- Caulk or silicone that peels away from the tub or shower edge. Adhesion fails when the surfaces behind it hold moisture. Peeling caulk is often the first visible sign of a failing seal beneath the tile.
- A bath fan that runs but doesn’t clear the mirror. The fan motor or the ducting has failed. A bath with no window and a dead fan traps steam against every surface, and that steam is what kills the caulk and grout in the first place.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Enterprise homeowners actually pay for Cover-and-compatible bath work. These ranges include parts and labor, and we put the line items in writing before we touch anything.
| Project | Installed Price Range |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What pushes a job toward the top of the range: moving plumbing, replacing a failed pan or subfloor, custom cabinet sizes to hit a Cover footprint, and tile work that goes beyond a simple surround. A like-for-like vanity swap with a Cover-match front sits near $800 – $1,500; a full gut with a new shower and tile floor climbs toward $28,000. Every project carries our written guarantee with stated terms, and if something we installed fails within a year, we come back and make it right at no charge to you.
DIY or Call Us?
Some of this you can check yourself, safely. Open the cabinet doors and look for swelling or staining under the vanity. Press on the shower floor near the drain to feel for flex. Run the fan and hold a tissue to the grille to confirm it’s pulling air. Peel back a lifted edge of caulk to see if the surface underneath is wet.
Where DIY goes wrong is anything behind the wall or under the floor: a pan replacement, tile removal, moving a drain, or chasing a leak into framing. Water damage you can’t see is the expensive kind, and a bathroom put back together over a hidden leak fails again within the year. If you’ve found softness, flex, or a leak, call (844) 797-6157 and let us look before you buy parts. Estimates are free, and the price we give you is written down.
FAQs

A properly installed Cover bath with good ventilation and sealed seams should hold up 15 to 20 years or more. The single biggest factor in Enterprise is the bath fan: in a climate this dry, a dead fan or a clogged duct is what quietly shortens the life of a bathroom. Call (844) 797-6157 to schedule a free estimate.
Sometimes, yes. A vanity door, a drawer front, a trim piece, or a hinge is usually a repair, not a remodel. But a flexing shower pan, cracked tile over a soft substrate, or a vanity box that’s swollen from a leak is a replacement, because the damage underneath has to come out. We’ll tell you honestly which one you’re looking at. Call (844) 797-6157 for a free assessment.
A vanity or fixture swap is typically a day or less, and a shower replacement runs two to four days once the parts are on site. Full bathroom remodels take longer, and we give you the schedule in writing up front. Call (844) 797-6157 to talk through your timeline.
We read the model and label inside your cabinet or panel, measure the opening, and match the part to your actual production run, not the nearest guess. If Cover doesn’t have a match, we spec a Kohler, Moen, or KraftMaid equivalent that fits the same footprint. We’re independent and not affiliated with Cover, so our job is getting you the right part, not protecting a brand. Call (844) 797-6157 for a free estimate.
If your Cover bathroom in Enterprise has a part that failed, or you’re planning a full remodel, the next step is simple: call Mason Remodeling Enterprise at (844) 797-6157 for a free estimate. You’ll get a written price before any work begins, a crew member verified by name and photo before they reach your door, and our 365-Day Done Right Promise behind the work. A live person answers every call, day or night.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












