A Mason company - serving Enterprise, NV
A new rear addition with a vaulted beamed ceiling and tall windows
Cover · Enterprise

Cover Home Additions & ADU in Enterprise, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Enterprise
A second-story addition that matches the existing roofline
A wide opening with a new beam where the kitchen wall was removed
A small remodeled galley kitchen with cabinets to the ceiling
A low-threshold walk-in shower with a bench and grab bar
A finished basement family room with a media wall and wet bar
A walk-in pantry with wood shelving
A powder room with botanical wallpaper and a stone sink
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Cover Home Additions & ADU: The Enterprise Owner’s Guide

We build and install home additions and ADUs for Cover-system homes in Enterprise, and the installed price typically runs $45,000 to $130,000 for an addition and $90,000 to $220,000 for a detached ADU. If your Cover home addition or ADU component has failed, we quote the fix in writing before any work starts, and we’re an independent service provider, not affiliated with Cover. In Enterprise we see this most often when a homeowner walks the side yard and finds water staining on the new foundation stem wall after monsoon season, or when a room addition that was tied in years ago starts showing a hairline crack at the transition seam to the original house.

Two construction workers framing a doorway during bathroom remodeling in Enterprise, NV

Call (844) 797-6157

Which Cover Models This Applies To

A single-story rear room addition with tall windows and a new patio

Cover builds steel-framed, panelized home additions and accessory dwelling units under a few structural series, and the parts that fail first are the ones at the envelope: the transition flashing where the addition roof meets the original roofline, the panel-to-foundation anchor plates, the window and door rough-opening seals, and the panel seam gaskets. The version matters. Older series used a narrower seam gasket profile than the current one, and a gasket pulled from the wrong series will look right on the shelf and leak within one rainy season. To identify yours, look at the panel label near the base of each wall, read the series and revision code, and measure the existing gasket width with a tape before you order anything.

On OEM versus aftermarket: for structural anchors and flashing, we use OEM or a spec-equivalent metal from a trusted supplier, never a generic substitute, because the load path and the thermal movement in Enterprise’s heat depend on the exact gauge and alloy. For gaskets and sealants, a quality aftermarket EPDM made for the same profile works fine. We also service KraftMaid, Cambria, and Silestone finishes inside these additions, so if the project includes cabinetry or counters, we handle the whole scope.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Cover Home Additions & ADU Is Failing

  • Water staining on the foundation stem wall or panel base. Usually a failed transition flashing or a seam gasket that has dried and shrunk under the desert sun, letting monsoon rain track down behind the panel.
  • A hairline crack at the seam where the addition meets the house. Often normal thermal movement, but a widening or stepped crack can mean the anchor plates have worked loose and need a structural look.
  • Daylight or a draft around a window or door rough opening. The perimeter seal has failed, and in Enterprise that gap also lets in dust and heat, driving up your cooling bill before you notice it.
  • A soft spot or drip stain on the ceiling inside the addition. Almost always a roof flashing detail at the tie-in, not the roof itself, and it gets worse fast in our summer storms.
  • Gaps opening along panel seams. The gasket has aged out. Left alone, the seam takes on water and the panel edge starts to corrode, which turns a small part swap into a bigger repair.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A project lead and homeowner reviewing plans in a room under renovation

Here’s what the work runs in Enterprise. These are installed ranges, parts and labor together, not a parts-only price:

Project Installed Range
Home Addition $45,000 – $130,000
ADU Construction $90,000 – $220,000
Garage Conversion $30,000 – $80,000

The range moves on size, whether it’s a full rebuild or a targeted flashing and gasket fix, foundation and permit scope, and finish level inside. A flashing and gasket repair on an existing Cover addition sits at the low end; a new detached ADU with its own kitchen and bath sits at the high end. We give you a written, line-item price before any work starts – no verbal estimate that grows later. Every project carries the 365-Day Done Right Promise: if something we installed isn’t right within a year of completion, we make it right at no cost.

DIY or Call Us?

Some of this you can safely check yourself. Walk the perimeter, look for staining and gaps, and confirm the series code on the panel label – that helps us quote faster. What we don’t recommend is climbing the addition roof to reseal the tie-in flashing, or digging out and re-anchoring a panel plate. Roof-edge work is a fall risk, and structural anchors carry the load of the whole addition; a wrong fix there is expensive. Our technicians have up to 22 years of experience, and per The Threshold Standard you’ll get the technician’s name and photo before the visit and a photo ID badge at the door. Call (844) 797-6157 to start with a free estimate.

FAQs

Footing forms with tied rebar for a home addition

How long does a Cover home addition or ADU last before parts fail? The structure lasts decades, but the envelope parts – flashing, seam gaskets, perimeter seals – are the wear items, and in Enterprise’s heat and sun they often need attention well before the frame does. Sun exposure dries and shrinks gaskets faster here than in milder climates. Call (844) 797-6157 for an inspection and exact quote.

Can the failed part be repaired instead of replaced? Often yes. A failed seam gasket or flashing can frequently be resealed and re-flashed rather than rebuilt, and that’s the cheaper path when the panel and anchors are still sound. We tell you honestly which one your Cover addition needs. Call (844) 797-6157 – estimates are free.

How long does the swap take? A targeted flashing and gasket repair is usually a day or two. A larger structural fix or a new addition takes weeks depending on scope and permits. We put the timeline in writing with the price before we start. Call (844) 797-6157 to schedule.

How do you source the part? We match the part to your Cover series code, then pull OEM or a spec-equivalent from a vetted supplier – not from a truck, and not a generic guess. That’s how we avoid the wrong-gasket leak that catches homeowners off guard. Call (844) 797-6157 for a free estimate.

Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled hall bathroom with subway tile and a floating vanityA remodeled primary suite with built-in wardrobes and a window seatNew painted shaker cabinets with an organized deep drawerA remodeled hall bathroom with patterned floor tile and painted wallsA remodeled staircase with wood treads and a slim metal railingA remodeled primary bathroom with a soaking tub and walk-in shower

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Enterprise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Enterprise team

A local vetted partner works across Enterprise and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-6157
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Mason Remodeling Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch